1. Įvadas
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your AMANA K-Series PTAC (Packaged Terminal Air Conditioner) model PTC123K35AXXX. This unit is designed to provide 12,000 BTU of cooling and 3.5 kW of heating, making it suitable for conditioning spaces up to 550 sq. ft. It features a through-the-wall installation design and incorporates advanced technologies for enhanced control and quiet operation.
Key features include Digismart Technology for energy management, integrated Bluetooth and RF connectivity for simplified setup and control via the Amana brand mobile app, and an ultra-quiet two-fan design with a Sound Transmission Class (STC) rating of 29. The unit is designed and assembled in the U.S.A. and offers an EER value of up to 14.0.
2. Saugos informacija
Prieš naudodami perskaitykite visas instrukcijas. Failure to follow these instructions may result in property damage, personal injury, or death.
- Elektros sauga: Įsitikinkite, kad įrenginys prijungtas prie tinkamai įžeminto 230 V, 20 Amp electrical outlet. Do not use extension cords. All electrical work must be performed by a qualified electrician in accordance with local and national electrical codes.
- Montavimas: Installation must be performed by qualified personnel. Improper installation can result in electric shock, fire, or water leakage.
- Priežiūra: Disconnect power before performing any maintenance or cleaning. Do not attempt to repair the unit yourself. Contact qualified service personnel for repairs.
- Vėdinimas: Ensure proper airflow around the unit. Do not block air intake or exhaust vents.
- Šaltnešis: This unit contains R410-A refrigerant. Servicing involving refrigerant must be performed by certified technicians.
3. Produktas baigtasview
The AMANA K-Series PTAC PTC123K35AXXX is a robust and efficient climate control solution. Its design focuses on quiet operation, energy efficiency, and modern control capabilities.
Komponentai ir savybės:
- Pagrindinis blokas: The primary housing containing all operational components.
- Oro filtrai: Easily accessible polypropylene intake air filters for maintaining air quality.
- Vidiniai komponentai: Includes compressor, evaporator, condenser coils, and fans.
- Maitinimo laidas: Equipped with a 6-20 P plug for 230V, 20 Amp elektros servisas.
- Digismart Technology: Enables centralized control and energy cost reduction for multiple units.
- Bluetooth and RF Connectivity: Facilitates wireless communication with wall thermostats and the Amana brand mobile app.
- Tylus veikimas: Two-fan design and improved materials reduce operating noise and external sound transmission (STC 29).

3.1 pav. Bendra view of the AMANA K-Series PTAC unit.

3.2 pav.: priekis view of the PTAC unit, showing the accessible air filters at the top.
4. Sąranka ir diegimas
Proper installation is crucial for the performance and longevity of your PTAC unit. It is strongly recommended that installation be performed by a qualified HVAC technician.
Diegimo reikalavimai:
- Sleeve and Rear Grille: New installations require a compatible PTAC sleeve and a rear grille. These items are neįtraukta with the unit and must be purchased separately. The unit fits a standard PTAC sleeve size of 42" (Width) x 16 1/16" (Height) x 14 1/8" (Depth).
- Elektros jungtis: The unit requires a 230V, 20 Amp dedicated circuit. The power cord is equipped with a 6-20 P plug. Ensure the electrical outlet is correctly installed and grounded.
- Termostatas: This K-Series unit requires a wired or wireless wall thermostat for operation. The unit itself does not feature an integrated control pad.
- Programėlė mobiliesiems: Initial setup and configuration, including accessing advanced features and diagnostics, are performed using the Amana brand mobile app via Bluetooth connectivity.
Diegimo veiksmai (santrauka – išsamesnės informacijos ieškokite išsamiame diegimo vadove):
- Install the PTAC sleeve and rear grille into the wall opening according to their respective instructions.
- Carefully slide the PTC123K35AXXX unit into the installed sleeve.
- Connect the power cord to the dedicated 230V, 20 Amp išleidimo anga.
- Install and connect the wired or wireless wall thermostat.
- Download the Amana brand mobile app and follow the in-app instructions to pair with the unit via Bluetooth for initial configuration and settings.

4.1 pav.: 20 Amp power plug (NEMA 6-20P) required for the unit.
5. Naudojimo instrukcijos
The AMANA K-Series PTAC PTC123K35AXXX is controlled externally through a wall thermostat or the Amana brand mobile app.
Kontrolės metodai:
- Wall Thermostat: Use the connected wired or wireless wall thermostat to set desired temperature, operating mode (Cooling, Heating, Fan Only), and fan speed. Refer to your thermostat's specific instructions for detailed operation.
- Amana Brand Mobile App: Download the official Amana brand mobile app to your smartphone or tablet. Connect to the unit via Bluetooth or RF for comprehensive control. The app allows you to:
- Adjust temperature and operating modes.
- Configure unit settings.
- Access advanced features.
- Perform troubleshooting and diagnostics.
Veikimo režimai:
- Aušinimas: Provides air conditioning to lower room temperature.
- Šildymas: Utilizes the 3.5 kW electric heater to raise room temperature.
- Tik ventiliatorius: Cirkuliuoja orą be šildymo ar aušinimo.
- Automatinis paleidimas: Įrenginys automatiškai paleis iš naujo su ankstesniais nustatymais po elektros energijos tiekimo nutraukimotage.
- Atitirpinimo kontrolė: Manages defrost cycles during heating operation to maintain efficiency.
6. Priežiūra
Regular maintenance ensures optimal performance and extends the lifespan of your AMANA PTAC unit.
Filtro valymas:
The unit is equipped with a polypropylene intake air filter. Clean the filter regularly, typically every 2-4 weeks, or more frequently depending on usage and air quality.
- Atjunkite maitinimą: Always turn off the unit and disconnect power before accessing the filter.
- Pašalinti filtrą: Locate and carefully remove the intake air filter(s) from the top of the unit (refer to Figure 3.2).
- Išvalyti filtrą: Wash the filter with warm, soapy water. Rinse thoroughly and allow it to air dry completely before reinstallation. Do not use harsh chemicals or abrasive cleaners.
- Įdiekite filtrą iš naujo: Once dry, carefully slide the filter back into its position.
Bendras valymas:
- Nuvalykite įrenginio išorę minkšta, damp skudurėliu. Nepurkškite vandens tiesiai ant įrenginio.
- Ensure the condensate drain pan is clear of debris to prevent overflow.
Profesionalus aptarnavimas:
It is recommended to have the unit inspected and serviced by a qualified HVAC technician annually to ensure optimal performance and address any potential issues with internal components, refrigerant levels, or electrical connections.

Figure 6.1: Internal components of the PTAC unit, including the compressor and copper coils. Professional servicing is required for these parts.
7. Problemų sprendimas
Prieš kreipdamiesi į klientų aptarnavimo tarnybą, dar kartąview toliau išvardytos dažnos problemos ir sprendimai.
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Įrenginys neįsijungia | No power; Thermostat not connected/powered; Unit not properly seated in sleeve. | Check power supply and circuit breaker. Ensure thermostat is powered and communicating. Verify unit is fully inserted into the sleeve. |
| Įrenginys neefektyviai vėsina / šildo | Dirty air filter; Blocked air vents; Incorrect thermostat setting; Refrigerant leak (cooling); Heater malfunction (heating). | Clean air filter. Ensure no obstructions to airflow. Verify thermostat settings. For refrigerant or heater issues, contact a qualified technician. |
| Thermostat pairing issues | Incorrect pairing procedure; Signal interference; Thermostat battery low. | Refer to the Amana brand mobile app or thermostat manual for pairing instructions. Ensure thermostat batteries are fresh. Reduce potential interference. |
| Neįprastas triukšmas veikimo metu | Atsilaisvinusios dalys; užsikimšęs ventiliatorius; kompresoriaus problema. | Disconnect power and inspect for loose parts or obstructions. If noise persists or is severe, contact a qualified technician. |
For advanced diagnostics and troubleshooting, utilize the Amana brand mobile app, which can provide detailed information about unit status and error codes. If issues persist after attempting these solutions, contact AMANA customer support or a certified service technician.
8. Specifikacijos
| Specifikacija | Detalė |
|---|---|
| Prekės ženklas | AMANA |
| Modelio informacija | PTC123K35AXXX |
| Aušinimo talpa | 12,000 BTU (1 tona) |
| Šildymo pajėgumas | 3.5 kW |
| ttage | 230 voltų |
| Vattage | 3.5 KW (Heater) |
| Efektyvumas | High (EER up to 14.0) |
| Diegimo tipas | Per sieną |
| Gaminio matmenys | 14 "D x 42" P x 16" A |
| Prekės svoris | 120 svaro |
| Šaldymo agentas | R410-A |
| Filtro tipas | Polypropylene intake air filter |
| Ypatingos savybės | Auto Restart, Defrost Control, Front Desk Control, Remote Controlled, Wi-Fi Option, Cooling, Heating, Electric Heater, Universal Size, Anti Corrosion Design. 24V option |
| Suderinami įrenginiai | DS01G, DSA01NM, MMW-2, PHWT-A150H, PHWT-A200 |
| Medžiagos tipas | Aluminum, Copper, Galvanized Steel, Plastic and Insulation Materials, Polypropylene |
9. Garantija ir palaikymas
For specific warranty information regarding your AMANA K-Series PTAC PTC123K35AXXX, please refer to the warranty card included with your product or visit the official AMANA website. Warranty terms typically cover manufacturing defects and may vary.
If you require technical assistance, have questions about operation, or need to schedule service, please contact AMANA customer support. Have your model number (PTC123K35AXXX) and serial number ready when you call.
AMANA Customer Support: Refer to your product documentation or the AMANA websvetainė, kurioje pateikiama naujausia kontaktinė informacija.





