Įvadas
These DBPOWER Smart Jump Starter Clamps are designed as a replacement or upgrade for compatible DBPOWER 12V car jump starters. They feature an integrated LCD screen for real-time voltage display and incorporate multiple protection systems to ensure safe and reliable operation during vehicle jump-starting.
Safety Information and Protection Systems
The intelligent jumper clamps are equipped with 8 protection systems to prevent common misoperations and ensure user safety. Always follow these guidelines when using the clamps.
Vaizdas: This diagram illustrates the eight built-in protection systems: Surge Voltage Protection, Overcurrent Protection, Reverse Polarity Protection, High Temperature Protection, High Voltage Protection, Short Circuit Protection, Over Discharge Protection, and Reverse Connection Protection. These features safeguard both the user and the vehicle's battery.
- Surge Voltage Apsauga: Prevents damage from sudden voltage smaigaliai.
- Apsauga nuo viršsrovių: Apsaugo nuo per didelio srovės tekėjimo.
- Apsauga nuo atvirkštinio poliškumo: Įspėja ir neleidžia veikti, jei užsikemšaampneteisingai prijungti prie akumuliatoriaus gnybtų.
- Apsauga nuo aukštos temperatūros: Shuts down operation if the unit overheats.
- Aukštas tomastage Apsauga: Protects against overvoltage sąlygos.
- Trumpojo jungimo apsauga: Apsaugo nuo atsitiktinio trumpojo jungimo padarytos žalos.
- Apsauga nuo per didelio iškrovimo: Protects the jump starter battery from being excessively drained.
- Atvirkštinio ryšio apsauga: Ensures correct connection to the vehicle battery.
Produkto savybės
- LCD ekranas: Rodo akumuliatoriaus įkrovą realiuoju laikutage, eliminating the need for a separate voltmeter.
- Patvari medžiaga: Constructed with high-quality ABS material and full copper cables for stable and insulated performance.
- Padidintas saugumas: Upgraded design for improved protection and reliability compared to older models.
Vaizdas: This image highlights the upgraded material design and the integrated LCD display of the DBPOWER Smart Jumper Clamp, contrasting it with a generic clamp lacking these features.
Vaizdas: Išsamią view of the DBPOWER Smart Jumper Clamps, emphasizing the LCD display and the robust construction designed for reverse polarity and short-circuit protection.
Suderinamumas
These smart jumper clamps are specifically designed to be compatible with the following DBPOWER 12V car jump starter models:
- DBPOWER DJS80
- DBPOWER G15
- DBPOWER G16
Vaizdas: This image shows the DBPOWER Smart Jumper Clamps connected to different compatible DBPOWER jump starter units, including models DJS80, G15, and G16, demonstrating their intended use.
Naudojimo instrukcijos
Steps to Jump Start Your Car
- Connect to the Jump Starter: Įkiškite mėlyną išmaniojo telefono kištukąamps into the corresponding port on your DBPOWER jump starter. Ensure a secure connection.
- Prijunkite Clamps iki automobilio akumuliatoriaus: Prijunkite raudoną teigiamą (+) laidąamp to the positive (+) terminal of the car battery. Attach the black negative (-) clamp to the negative (-) terminal of the car battery. The LCD screen on the clamps will display the battery voltage.
- Start the Car Engine: Kartą klamps are correctly connected and the jump starter is ready (refer to your jump starter's manual for specific indicators), start your car's engine.
- Nuimkite Clamps: After the car engine starts, immediately remove the clamps from the car battery, first the black negative (-) clamp, then the red positive (+) clamp. Disconnect the clamps nuo šuolio starterio.
Vaizdas: This visual guide demonstrates the four steps for jump starting a car: 1. Connect the clamps to the jump starter. 2. Connect the clamps to the car battery. 3. Start the car engine. 4. Remove the clamps.
LCD Display Indicators and Troubleshooting
The integrated LCD screen provides important feedback during operation. Observe the display for status and error messages.
Vaizdas: This image displays the LCD screen of the smart clamps, showing various indicators such as current voltage (e.g., 13.0V), and error codes like LV (Low Voltage), HV (High Voltage), RC (Reverse Charge), SC (Short Circuit), HT (High Temperature), and Overload. These indicators assist in diagnosing issues during jump-starting.
| Rodiklis | Reikšmė | Veiksmas |
|---|---|---|
| ttage Display (e.g., 12.0V) | Dabartinis ttage transporto priemonės akumuliatoriaus. | Proceed with jump start if voltage is low but within acceptable range for jump starting. |
| LV (mažas tūristage) | Transporto priemonės akumuliatoriaus tūristage yra per žemas. | Ensure jump starter is fully charged. Check battery connections. |
| HV (High Voltage) | Transporto priemonės akumuliatoriaus tūristage yra per aukštas. | Do not attempt to jump start. Consult a mechanic. |
| RC (Reverse Charge) | Indicates reverse charging or incorrect connection. | Patikrinkite clamp connections to battery terminals. Ensure red is to positive (+), black to negative (-). |
| SC (Short Circuit) | A short circuit has been detected. | Nedelsiant atjunkite clamps. Inspect cables and terminals for damage or improper contact. |
| HT (High Temperature) | Klamps or jump starter are overheating. | Disconnect and allow the unit to cool down before attempting further use. |
| Perkrova | Excessive current draw detected. | Ensure the vehicle's electrical system is not drawing too much power. Consult vehicle manual. |
Specifikacijos
| Funkcija | Detalė |
|---|---|
| Modelio numeris | F15A |
| ttage | 12 voltų |
| Prekės svoris | 231 g |
| Medžiaga | High-quality ABS, Copper |
| UPC | 840164806472 |
| Compatible Jump Starters | DBPOWER DJS80, G15, G16 |
Priežiūra ir sandėliavimas
- Laikykite klamps clean and dry. Wipe off any dirt, oil, or battery acid residue after each use.
- Patikrinkite laidus ir kontaktusamps regularly for any signs of damage, fraying, or corrosion. Do not use if damaged.
- Laikykite klamps in a cool, dry place, away from direct sunlight and extreme temperatures.
- Įsitikinkite, kad klamps are disconnected from the jump starter and vehicle battery when not in use.
Pagalba klientams
For further assistance, technical support, or warranty inquiries, please refer to the contact information provided with your original DBPOWER jump starter unit or visit the official DBPOWER websvetainę.