1. Įvadas
This manual provides essential information for the proper installation and operation of your HUPEJOS Type-C Hardwire Kit with Radar Detection. This kit is designed to provide continuous power to your compatible dash cam, enabling advanced parking monitoring features and battery protection. Please read this manual thoroughly before installation and use.
2. Kas yra dėžutėje
The HUPEJOS LD-001 Hardwire Kit package includes the following components:
- 1x Hardwire Kit with integrated Radar Detection module
- Various fuse taps for installation

Figure 1: Components of the HUPEJOS Type-C Hardwire Kit.
3. Specifikacijos
| Modelio numeris | LD-001 |
| Prekės ženklas | HUPEJOS |
| Įvesties tomastage | 12–24 V (nuolatinė srovė) |
| Išėjimas ttage/srovė | 5V/2.5A |
| Žemas tomastage Apsauga | Automatically cuts off power after 60s if voltage is below 11.8V (±0.2V) |
| Parkavimo stebėjimas | 24-Hour Radar Intelligent Monitoring System |
| Suderinami įrenginiai | HUPEJOS V7, HUPEJOS V7PRO, HUPEJOS V80, and other Type-C USB dash cams |
| Prekės svoris | 5.6 uncijos |
| Gaminio matmenys | 4.7 x 2 x 2.76 colio |
| Garantija | 1 metai |
4. Sąranka ir diegimas
Proper installation of the hardwire kit is crucial for optimal performance and to prevent vehicle battery drain. Follow these steps carefully:
4.1. Saugos priemonės
- Before connecting the hardwire kit, ensure the vehicle engine is OFF.
- Atjunkite neigiamą automobilio akumuliatoriaus gnybtą, kad išvengtumėte trumpojo jungimo.
- If you are unsure about any steps, consult a professional auto technician.
4.2. Connecting the Hardwire Kit to the Fuse Box
The hardwire kit connects directly to your vehicle's fuse box, providing a permanent and discreet power source for your dash cam.
- Saugiklių dėžutės identifikavimas: Locate your vehicle's fuse box, typically found under the dashboard on the driver's side.
- Prijunkite ACC laidą (raudoną): The red wire from the hardwire kit must be connected to an ACC (Accessory) fuse. An ACC fuse provides power only when the vehicle's ignition is on. Use the provided fuse tap to connect the red wire to an appropriate ACC fuse slot.
- Connect BAT+ Wire (Yellow): The yellow wire from the hardwire kit must be connected to a BAT+ (Battery) fuse. A BAT+ fuse provides continuous power even when the vehicle is turned off, which is essential for parking monitoring. Use a fuse tap to connect the yellow wire to a suitable BAT+ fuse slot.
- Prijunkite GND laidą (juodą): The black wire from the hardwire kit is the ground wire. Connect it to a metal part of the vehicle's chassis, such as a screw or bolt, to ensure a proper ground connection.
- General Wiring Diagram: For a visual guide on connecting the hardwire kit to your fuse box, refer to the diagram below.

Figure 2: Connecting the red ACC wire to an accessory fuse slot.

Figure 3: Connecting the yellow BAT+ wire to a constant power fuse slot.

Figure 4: Connecting the black ground wire to a metal part of the car.

Figure 5: General wiring diagram for the hardwire kit.
4.3. Cable Routing & Radar Unit Mounting
Once the hardwire kit is connected, route the cables neatly to the dash cam and mount the radar detection unit.
- Maršruto kabeliai: Carefully tuck the power cable along the vehicle's interior trim, headliner, and A-pillars to conceal it and ensure a clean installation.
- Mount Radar Unit: The radar detection unit should be mounted on the windshield, typically near the dash cam, ensuring it has a clear view forward. Use the provided 3M adhesive tape to secure it. The radar unit should be perpendicular to the ground for optimal detection.
- Prisijunkite prie Dash Cam: Plug the Type-C connector from the hardwire kit into your compatible HUPEJOS dash cam.

6 pav. Pvzample of routing cables along the vehicle's interior for a discreet installation.

Figure 7: The radar detection module of the hardwire kit.
4.4. Diegimo vaizdo įrašai
For visual guidance on the installation process, please refer to the following seller-provided videos:
- Installation of Hardwire Kit: This video demonstrates the general steps for installing the hardwire kit.
Video 1: General installation steps for the hardwire kit.
- How to Install Hardwire Kit with Radar: A specific guide on installing the hardwire kit with the radar module.
Video 2: Detailed installation guide for the hardwire kit with radar.
- Installation of 24H Parking Mode Radar Detection: This video focuses on setting up the radar detection for 24-hour parking mode.
Video 3: Setup for 24-hour parking mode with radar detection.
5. Naudojimo instrukcijos
5.1. 24-Hour Radar Intelligent Parking Monitoring
The hardwire kit's integrated radar system provides continuous surveillance even when your vehicle is parked and the engine is off. This intelligent system helps conserve power and memory by only recording when necessary.
- Aptikimo diapazonas: The radar monitors objects within a 3 to 4-meter range in front of the vehicle.
- Automatinis įrašymas: If an object is detected approaching the car while parked, the dash cam will automatically record a 1-minute video.
- Nepertraukiamas įrašymas: If movement persists after the initial 1-minute recording, the system will continue to record until the object leaves the detection zone.
- Power & Memory Saving: The system automatically stops recording and shuts down when no movement is detected, optimizing power consumption and memory card usage.

Figure 8: Diagram illustrating the radar intelligent monitoring system.

Figure 9: Benefits of radar sensor recording for parking monitoring.
Video 4: Demonstration of 24-hour parking mode with radar system monitoring.
5.2. Žemas tomastage Apsauga
The hardwire kit is equipped with multiple security protections to safeguard your vehicle's battery and the dash cam:
- Automatinis maitinimo išjungimas: If the vehicle's voltage drops below 11.8V (±0.2V), the hardwire kit will automatically cut off power to the dash cam after 60 seconds. This prevents the car battery from being completely drained.
- Saugos savybės: Includes protection against over-current, short-circuit, reverse connection, and overheating.
- Suderinamumo pastaba: This hardwire kit is not applicable for trucks with voltage virš 24 V.

Figure 10: Illustration of the low-voltage battery drain protection feature.
6. Problemų sprendimas
If you encounter any issues with your HUPEJOS Hardwire Kit, please consider the following general troubleshooting steps:
- Vaizdo registratorius neturi maitinimo: Check all fuse box connections (ACC, BAT+, GND) to ensure they are secure and correctly wired. Verify that the fuses are not blown.
- Akumuliatoriaus išsikrovimas: Užtikrinkite žemą garsumątage protection is functioning correctly. If the dash cam continues to drain the battery, re-check the BAT+ connection and ensure it's not drawing excessive power.
- Parkavimo režimas neįsijungia: Verify that the radar unit is correctly mounted and has a clear view. Check the dash cam settings to ensure parking mode is enabled and configured to work with the hardwire kit.
- Operacija su pertraukomis: Inspect all cable connections for looseness or damage. Ensure the Type-C connector is fully inserted into the dash cam.
7. Garantija ir palaikymas
The HUPEJOS LD-001 Type-C Hardwire Kit comes with a 1 metų garantija nuo įsigijimo datos. Ši garantija taikoma gamybos defektams ir gedimams įprasto naudojimo metu.
For technical support, warranty claims, or any questions regarding your product, please contact HUPEJOS customer service through the retailer where you purchased the product or visit the official HUPEJOS websvetainę.





