Įvadas
Thank you for choosing the Lenercom 1500A 12V Car Jump Starter with 150 PSI Tire Inflator. This versatile device combines four essential functions: a powerful car jump starter, a portable tire inflator, a 12000mAh power bank, and an emergency LED flashlight. This manual provides detailed instructions for safe and effective use, maintenance, and troubleshooting.
Image: The Lenercom 4-in-1 device highlighting its functions as a jump starter, air compressor, power bank, and LED light.
Svarbi saugos informacija
Please read all safety warnings and instructions before using this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
- Do not connect the jump starter to a vehicle battery with a voltage didesnė nei 12V.
- Ensure the jump starter has more than 30% power before attempting to jump-start a vehicle.
- Neleiskite teigiamų ir neigiamų klamps liesti vienas kitą.
- Prietaisą laikykite vaikams nepasiekiamoje vietoje.
- Laikyti vėsioje, sausoje vietoje, toliau nuo tiesioginių saulės spindulių ir aukštos temperatūros.
- Naudokite tik pateiktus laidus ir priedus.
- Neardykite ir nemodifikuokite įrenginio.
Image: The Lenercom jump starter highlighting its intelligent chip protection and robust design for extreme environments.
Produktas baigtasview
The Lenercom PM4-12 includes the following components:
- Lenercom 1500A Jump Starter Unit
- Išmanieji užvedimo kabeliai (su jungtimi)amps)
- USB įkrovimo laidas
- Air Hose for Tire Inflator
- 3 x Air Nozzles (for various inflatables)
- Sandėliavimo krepšys
- Vartotojo vadovas
Sąranka
Pradinis įkrovimas
Before first use, or after a long period of non-use, fully charge the jump starter. Use a 5V/2A USB adapter (not included) with the provided USB cable. The LCD screen will display the battery level. A full charge ensures optimal performance and extends battery life.
To prolong battery life, discharge and recharge the unit completely every 3 months.
Naudojimo instrukcijos
1. Peršokti užvedant transporto priemonę
- Įsitikinkite, kad užvedimo jungiklis yra įkrautas bent 30 %.
- Prijunkite raudoną (+) jungtįamp prie teigiamo (+) automobilio akumuliatoriaus gnybto.
- Prijunkite juodą (-) jungtįamp prie neigiamo (-) automobilio akumuliatoriaus gnybto.
- Plug the smart jumper cable connector into the jump starter's port. The indicator light on the smart cable will turn green.
- Užveskite transporto priemonės variklį.
- Once the engine starts, immediately remove the smart jumper cable from the jump starter, then disconnect the black (-) clamp, po to raudonas (+) clamp iš automobilio akumuliatoriaus.
The Lenercom 1500A can jump-start vehicles with up to 7L gas or 4L diesel engines.
Image: The Lenercom jump starter connected to a car battery using the red and black clamps, ready to jump-start the vehicle.
2. Padangų pripūtimo įrenginio naudojimas
- Screw the air hose onto the tire valve stem.
- Connect the other end of the air hose to the inflator port on the jump starter.
- The LCD screen will display the current tire pressure.
- Use the '+' and '-' buttons to set the desired pressure. You can switch between units (PSI, Bar, Kpa, kg/cm²) using the unit button.
- Press the power button to start inflation. The inflator will automatically stop once the preset pressure is reached.
The 150 PSI air compressor can inflate car tires (195/65/R15 from 0 to 35 PSI in approximately 6 minutes), bicycles, balls, and other inflatables using the included nozzles.
Image: The Lenercom portable air compressor connected to a car tire, displaying pressure readings on its digital screen.
3. Naudojimas kaip išorinės baterijos
The Lenercom jump starter features a 12000mAh battery capacity with QC3.0 fast charging output and two USB ports. This allows you to charge mobile phones, tablets, and other USB-powered devices.
- Connect your device to one of the USB output ports using a compatible USB cable.
- Įkroviklis automatiškai pradės krauti jūsų įrenginį.
Image: The Lenercom device connected via USB cable, charging a smartphone, demonstrating its power bank functionality.
4. LED lemputės naudojimas
The integrated LED light offers three modes for various situations:
- Žibintuvėlio režimas: Press and hold the light button to turn on the flashlight.
- Stroboskopo režimas: Press the light button again to switch to strobe mode.
- SOS režimas: Press the light button a third time for SOS signaling.
- Press and hold the light button to turn off the LED light.
Image: The Lenercom device with its LED light illuminated, demonstrating its use as a flashlight.
Priežiūra
- Įkrovimas: To maintain battery health, fully discharge and recharge the unit every three months, even if not in use.
- Valymas: Nuvalykite įrenginį minkštu, sausu skudurėliu. Nenaudokite stiprių cheminių medžiagų ar abrazyvinių medžiagų.
- Saugykla: Store the jump starter in a cool, dry place between -4°F to 140°F (-20°C to 60°C). Keep it away from moisture and direct sunlight.
Trikčių šalinimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Vehicle does not start after jump-starting attempt. | Jump starter battery too low; incorrect clamp jungtis; visiškai išsikrovęs automobilio akumuliatorius. | Ensure jump starter has >30% charge. Check clamp polarity and secure connection. If vehicle battery is completely dead, it may not activate the jump starter's safety features. Consult a professional. |
| Tire inflator not working or inaccurate. | Air hose not securely connected; incorrect pressure setting; jump starter battery low. | Ensure air hose is tightly screwed onto valve and inflator port. Verify desired pressure setting. Charge the jump starter. |
| Įrenginys neįkraunamas arba įkraunamas lėtai. | Faulty USB cable or adapter; jump starter battery full. | Use the provided USB cable and a 5V/2A adapter. Try a different cable or adapter. The device will stop charging once full. |
| LED lemputė neįsijungia. | Jump starter battery low; button not pressed correctly. | Charge the jump starter. Press and hold the light button for a few seconds to activate. |
Specifikacijos
| Funkcija | Specifikacija |
|---|---|
| Modelis | PM4-12 |
| Didžiausia srovė | 1500A |
| ttage | 12 V |
| Baterijos talpa | 12000mAh (Lithium-polymer) |
| Oro kompresoriaus slėgis | Iki 150 PSI |
| USB išvestis | QC3.0 & Standard USB |
| Darbinė temperatūra | -4°F iki 140°F (nuo -20°C iki 60°C) |
| Matmenys (I x P x A) | 16.5 x 10 x 4.5 cm (6.5 x 3.9 x 1.8 colio) |
| Svoris | 1 kg (2.2 svaro) |
Garantija ir palaikymas
Lenercom products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Lenercom website. If you encounter any issues or have questions regarding your device, do not hesitate to contact our customer service team for assistance.
