1. Įvadas
The SilverStone Vista 140 ARGB is a 140mm PWM fan designed for efficient computer cooling. It features a 4-pin PWM control for precise fan speed regulation, a hydraulic bearing for quiet operation, and optimized fan blades to deliver both high airflow and static pressure. This fan also incorporates eight individually addressable RGB (ARGB) LEDs, allowing for customizable lighting effects. These ARGB LEDs can be controlled via a compatible ARGB controller or an ARGB-capable motherboard using standard 4-1 pin ARGB connectors.
Image 1.1: The SilverStone Vista 140 ARGB fan showcasing its customizable rainbow lighting effects.
2. Produkto ypatybės
- Adresuojamas RGB apšvietimas: Standard 4-1 pin ARGB lighting, synchronized via an ARGB controller or ARGB compatible motherboards.
- Optimizuotas našumas: Delivers high airflow and static pressure suitable for various cooling applications.
- PWM valdymas: Wide 0~1,600 RPM speed range via PWM control for tailored performance on demand.
- Tylus veikimas: Hydraulic bearing reduces friction and maintains low operational noise levels.
- Vibracijos mažinimas: Integrated rubber padding helps to further reduce vibrational noise.
Image 2.1: Hybrid Performance - A visual representation of the fan's balanced airflow and air pressure capabilities.
Image 2.2: PWM Control - A graph illustrating the fan's speed range from 0 to 1,600 RPM controlled by PWM duty cycle.
3. Pakuotės turinys
Patikrinkite, ar pakuotėje yra visi reikalingi daiktai:
- SilverStone Vista 140 ARGB Fan
- Cables (PWM and ARGB connectors)
4. Sąranka ir diegimas
Follow these steps to properly install your SilverStone Vista 140 ARGB fan:
- Paruoškite montavimo vietą: Identify the desired mounting location within your computer case, heatsink, or radiator. Ensure there is sufficient space and proper airflow direction.
- Ventiliatoriaus montavimas: Secure the fan to the mounting location using appropriate screws. The integrated rubber padding on the fan corners helps reduce vibration.
- Connect PWM Cable: Locate the 4-pin PWM fan header on your motherboard. Connect the fan's 4-pin PWM cable to this header. This allows the motherboard to control the fan speed based on system temperature.
- Prijunkite ARGB kabelį: Locate a 4-1 pin (3-pin, 5V) Addressable RGB header on your motherboard or an external ARGB controller. Connect the fan's ARGB cable to this header. Ensure correct pin orientation to avoid damage.
- Kabelių valdymas: Route cables neatly to prevent interference with other components and to maintain good airflow within the case.
Image 4.1: Fan corner with anti-vibration rubber padding.
Image 4.2: 4-pin PWM connector for fan speed control.
Image 4.3: 4-1 pin ARGB connector for lighting control.
5. Naudojimo instrukcijos
Once installed, the SilverStone Vista 140 ARGB fan operates as follows:
- Ventiliatoriaus greičio valdymas (PWM): The fan speed is automatically regulated by your motherboard's BIOS/UEFI settings or operating system software, based on the temperature of your system components. You can typically adjust fan curves in your motherboard's software or BIOS to customize performance.
- ARGB apšvietimo valdymas: The Addressable RGB lighting can be controlled using your motherboard's ARGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync) or an external ARGB controller. Refer to your motherboard or controller manual for specific instructions on customizing lighting effects.
6. Priežiūra
Reguliarus ventiliatoriaus aptarnavimas užtikrina optimalų veikimą ir ilgaamžiškumą:
- Dulkių šalinimas: Periodically clean dust from the fan blades and frame using compressed air or a soft brush. Ensure the computer is powered off and unplugged before cleaning.
- Patikra: Check for any obstructions around the fan or damage to the cables.
7. Problemų sprendimas
If you encounter issues with your fan, consider the following:
- Ventiliatorius nesisuka:
- Įsitikinkite, kad 4 kontaktų PWM kabelis yra tvirtai prijungtas prie pagrindinės plokštės ventiliatoriaus lizdo.
- Check BIOS/UEFI settings to ensure the fan header is enabled and configured correctly.
- Patikrinkite, ar maitinimo šaltinis veikia tinkamai.
- Nėra ARGB apšvietimo:
- Confirm the 4-1 pin ARGB cable is correctly connected to a 5V ARGB header (not a 12V RGB header). Incorrect connection can damage the LEDs.
- Ensure your motherboard's ARGB software or external controller is properly installed and configured.
- Check for any physical damage to the ARGB cable or LEDs.
- Per didelis triukšmas:
- Įsitikinkite, kad ventiliatorius yra tvirtai pritvirtintas ir nevibruoja į korpusą.
- Nuvalykite visas dulkių sankaupas ant ventiliatoriaus menčių.
- Check fan speed settings in BIOS/UEFI; higher RPMs generate more noise.
8. Specifikacijos
| Funkcija | Specifikacija |
|---|---|
| Prekės ženklas | Sidabrinis akmuo |
| Modelio numeris | SST-VS140B-ARGB |
| Fan Dimensions (LxWxH) | 5.51 x 5.51 x 0.98 colio (140 x 140 x 25 mm) |
| Prekės svoris | 1 svaro |
| Maitinimo jungties tipas | 4-pin PWM |
| ARGB jungties tipas | 4-1 pin (3-pin, 5V) Addressable RGB |
| ttage | 12 voltų |
| Aušinimo būdas | Ventiliatorius |
| Suderinami įrenginiai | Radiatorius, kompiuterio korpusas |
| Medžiaga | Rubber (for padding) |
| Maksimalus sukimosi greitis | 1600 aps./min |
| Oro srauto talpa | 86 kubinių pėdų per minutę (CFM) |
| Triukšmo lygis | 0 ~ 30.8 dBA |
9. Garantija ir palaikymas
SilverStone Technology products are designed for reliability and performance. For warranty information and technical support, please refer to the official SilverStone Technology websvetainėje arba susisiekite tiesiogiai su jų klientų aptarnavimo tarnyba.
Daugiau informacijos ir pagalbos išteklių galite rasti apsilankę „SilverStone“ parduotuvė „Amazon“ platformoje.
