Vadovai+

Brandmotion 9002-3010

Brandmotion Universal 4-Sensor Parking Sensor System

Modelis: 9002-3010

1. Įvadas

This manual provides detailed instructions for the installation, operation, and maintenance of your Brandmotion Universal 4-Sensor Switchable Front or Rear Parking Sensor System (Model 9002-3010). This system is designed to assist drivers in avoiding common parking accidents by providing distance detection and audible alerts.

2. Saugos informacija

Always exercise caution when parking. This system is an aid and should not replace careful driving and visual inspection of your surroundings. Ensure all connections are secure and properly insulated to prevent electrical hazards. Professional installation is recommended for optimal safety and performance.

3. Pakuotės turinys

Prieš pradėdami diegti, patikrinkite, ar yra visi komponentai:

  • 4 Ultrasonic Sensors
  • LED ekrano blokas
  • Garsiakalbių blokas
  • Elektroninis valdymo blokas (ECU)
  • Sensor Harness (4 feet)
  • Switch Cable (5 feet)
  • Speaker Cable (5 feet)
  • Body Harness (8 feet)
  • Display Extension Cable (8 feet)
  • Mounting Hardware (as applicable for tape-in/drill-in)

4. Sąranka ir diegimas

The Brandmotion 9002-3010 system can be installed on either the front or rear of your vehicle. It is compatible with both steel and plastic bumpers. Professional installation is highly recommended. DIY installation typically takes 180-240 minutes, while professional installation is estimated at 120-180 minutes.

4.1 Jutiklio montavimas

  • Plastic Bumpers: Sensors are designed for rear tape-in mounting.
  • Metal Bumpers: Sensors are designed for front drill-in mounting.
  • Consult an automotive paint technician if you wish to customize the sensor color.
Four black parking sensors with wiring

1 pav.: pvz.ample of the four ultrasonic parking sensors. These sensors are designed for flush mounting into the vehicle's bumper.

4.2 Laidų jungtys

  1. Connect the 4' Sensor Harness from the body harness to the driver side sensor.
  2. Connect the 5' Switch Cable to the Electronic Control Unit (ECU).
  3. Connect the 5' Speaker Cable to the ECU.
  4. Connect the 8' Body Harness from the ECU to the vehicle's power source and other necessary connections.
  5. Connect the 8' Display Extension Cable to the LED Display Unit and the ECU.
Electronic Control Unit (ECU) for the parking sensor system

Image 2: The Electronic Control Unit (ECU) with a barcode label F20230801218. This unit processes sensor data and controls the display and speaker.

5. Naudojimo instrukcijos

Once installed, the parking sensor system provides visual and audible feedback to assist with parking maneuvers.

5.1 LED Display Unit

LED display unit showing '2.8' and color-coded distance indicators

Image 3: The LED display unit. It shows numerical distance to an object and uses color-coded segments (green, yellow, red) to indicate proximity.

  • The display shows the distance to the nearest object numerically.
  • Color-coded segments (green, yellow, red) illuminate to visually represent proximity. Green indicates a safe distance, yellow indicates caution, and red indicates very close proximity.

5.2 Audible Alert Speaker

Speaker unit with 'Off Lo Hi' switch, part of a larger display and speaker assembly

Image 4: The speaker unit, visible as part of the display assembly. It features a switch with 'Off', 'Lo' (Low), and 'Hi' (High) volume options.

  • The speaker emits an audible alert that increases in frequency as your vehicle approaches an object.
  • The speaker unit features a switch with "Off", "Low", and "High" volume options to suit user preference.

6. Priežiūra

To ensure optimal performance and longevity of your parking sensor system:

  • Keep sensors clean from dirt, snow, ice, and debris. Obstructions can lead to inaccurate readings.
  • Periodically check all wiring connections for security and signs of wear.
  • Avoid using harsh chemicals or abrasive materials when cleaning the sensors or display unit.

7. Problemų sprendimas

If you experience issues with your parking sensor system, refer to the following common problems and solutions:

ProblemaGalima priežastisSprendimas
Inconsistent or False Alerts
  • Sensors are dirty or obstructed.
  • Heavy rain or snow.
  • Interference from other vehicle systems.
  • Improper sensor angle/installation.
  • Kruopščiai nuvalykite jutiklius.
  • System performance may be affected by severe weather.
  • Ensure proper grounding and wiring.
  • Verify sensors are flush and correctly angled.
No Display or Audible Alert
  • Maitinimo jungties problema.
  • Atsilaisvinę kabelių jungtys.
  • Speaker volume set to "Off".
  • Check power supply to the ECU.
  • Inspect all harness and cable connections.
  • Adjust speaker volume switch to "Lo" or "Hi".
Display Shows Incorrect Distance
  • Jutiklio obstrukcija.
  • Pažeistas jutiklis.
  • Clear any obstructions from sensors.
  • Contact support if a sensor is suspected to be faulty.

8. Specifikacijos

  • Modelis: 9002-3010
  • Jutiklio tipas: 4 Ultrasonic Sensors
  • Veikimas: Front or Rear (Switchable)
  • Ekranas: High-Quality LED, Numerical and Color-Coded
  • Įspėjimai: Audible, increasing frequency with proximity
  • Garsiakalbio parinktys: Išjungtas, Žemas, Aukštas
  • Sensor Harness Length: 4 pėdų
  • Switch Cable Length: 5 pėdų
  • Garsiakalbio kabelio ilgis: 5 pėdų
  • Body Harness Length: 8 pėdų
  • Display Extension Cable Length: 8 pėdų
  • UPC: 819779022409
  • Gaminio matmenys (pakuotė): 9.75 colių ilgis x 7.25 colių plotis x 2.5 colio aukštis
  • Product Weight (Packaging): 1.65 svaro

9. Garantija ir palaikymas

For warranty information or technical support, please contact Brandmotion customer service. Keep your proof of purchase for warranty claims.

Brandmotion Contact: Refer to the official Brandmotion webNaujausią kontaktinę informaciją rasite svetainėje arba produkto pakuotėje.

Internetiniai ištekliai: Visit the Brandmotion Store on Amazon