1. Įvadas
The ASETEK Invicta Direct Drive Wheelbase 27Nm is a high-performance steering system designed for PC sim racing. It delivers precise force feedback, replicating real driving experiences with exceptional accuracy and responsiveness. This manual provides essential information for the proper installation, operation, maintenance, and troubleshooting of your Invicta Wheelbase.
Pagrindinės funkcijos:
- Tiesioginės pavaros technologija: Provides authentic and precise force feedback for an immersive racing experience.
- Didelė raiška: Features a resolution of 0.000085 degrees, translating to approximately 4,000,000 steps per revolution for nuanced feedback.
- Pritaikomi nustatymai: Adjust steering range, force feedback, friction, and LED lights via the RaceHub software.
- Tvirta konstrukcija: Built with anodized extruded aluminum housing and premium components for durability.
2. Sąranka ir diegimas
Follow these steps to properly set up your Invicta Direct Drive Wheelbase.
2.1 Išpakavimas ir komponentų patikrinimas
Carefully unpack all components and verify against the packing list. The box should contain:
- Invicta™ Wheelbase
- ON/OFF mygtukas
- Torque OFF Button
- Maitinimo 400W
- USB-C į USB-A laidas
- Power Cord (EU, US, UK variants included)
- Montavimo įranga (pridedama)
2.2 Važiuoklės bazės montavimas
The Invicta Wheelbase requires secure mounting to a sim racing rig or desk. Use the provided mounting hardware and ensure the wheelbase is firmly attached to prevent movement during use. Refer to your rig's instructions for specific mounting points.
2.3 Kabelių prijungimas
- Prijunkite Maitinimo 400W to the wheelbase's PWR port and then to a suitable wall outlet using the appropriate regional power cord (110-240 V AC).
- Prijunkite USB-C į USB-A laidas from the wheelbase's USB port to an available USB port on your PC.
- Prijunkite ON/OFF mygtukas ir Torque OFF Button to their respective ports on the wheelbase.
- If using ASETEK pedals, connect them to the designated pedal port on the wheelbase.
2.4 Software Installation (RaceHub)
Download and install the latest version of the Asetek RaceHub software from the official Asetek SimSports website. RaceHub is essential for configuring your wheelbase, updating firmware, and customizing settings.
3. Naudojimo instrukcijos
3.1 Įjungimas ir išjungimas
To power on the wheelbase, press the ON/OFF mygtukas. The wheelbase will initialize. To power off, press the ON/OFF mygtukas again. Always ensure the wheelbase is powered off when not in use or when making physical connections.
3.2 Torque OFF Function
The Torque OFF Button is a safety feature that immediately disables force feedback. Press this button if you need to quickly stop all motor activity, for example, in an emergency or when adjusting your setup. Press it again to re-enable torque.
3.3 Using RaceHub Software
RaceHub is your primary interface for managing the Invicta Wheelbase. It allows you to:
- Create and Save Profiles: Configure specific settings for different cars, tracks, or racing conditions.
- Adjust Force Feedback: Fine-tune the strength and characteristics of the force feedback.
- Set Steering Range: Customize the maximum rotation of the wheel.
- Control LED Lights: Adjust the behavior and colors of the integrated LED lighting.
- Atnaujinti programinę-aparatinę įrangą: Ensure your wheelbase has the latest performance enhancements and bug fixes.
Regularly check for RaceHub software and firmware updates to ensure optimal performance and compatibility.
4. Priežiūra
Proper maintenance ensures the longevity and optimal performance of your Invicta Wheelbase.
- Valymas: Use a soft, dry cloth to clean the exterior of the wheelbase. Avoid abrasive cleaners, solvents, or excessive moisture.
- Kabelių valdymas: Ensure all cables are neatly routed and not under tension or pinched to prevent damage.
- Programinės įrangos atnaujinimai: Keep RaceHub software and wheelbase firmware updated. Check the Asetek SimSports website regularly for new versions.
- Maitinimas: Only use the original 400W power supply provided with the wheelbase. Using aftermarket power supplies may void your warranty and could damage the unit.
- Saugykla: When not in use for extended periods, store the wheelbase in a clean, dry environment, protected from dust and extreme temperatures.
5. Problemų sprendimas
If you encounter issues with your Invicta Wheelbase, refer to the following common solutions before contacting support.
5.1 No Power / Wheelbase Not Turning On
- Verify the power cable is securely connected to both the wheelbase and the wall outlet.
- Įsitikinkite, kad sieninis lizdas veikia.
- Patikrinkite, ar ON/OFF mygtukas yra paspaustas.
- Confirm the 400W power supply is correctly connected.
5.2 No Force Feedback
- Užtikrinti, Torque OFF Button is not active (LED should indicate torque is enabled).
- Check USB connection to the PC. Try a different USB port.
- Verify force feedback settings within RaceHub and your sim racing game.
- Restart the wheelbase and your PC.
- Ensure RaceHub software and wheelbase firmware are up to date.
5.3 Wheelbase Not Detected by PC / RaceHub
- Confirm the USB-C to USB-A cable is properly connected.
- Išbandykite kitą kompiuterio USB prievadą.
- Restart your PC and the wheelbase.
- Reinstall the RaceHub software.
- Check Device Manager on Windows to see if the device is recognized (even with an error).
5.4 Unexpected Behavior / Calibration Issues
- Perform a calibration within RaceHub software.
- Reset settings to default in RaceHub and reconfigure.
- Ensure no other conflicting software or drivers are running.
6. Specifikacijos
Below are the technical specifications for the ASETEK Invicta Direct Drive Wheelbase 27Nm:
| Funkcija | Specifikacija |
|---|---|
| Modelio pavadinimas | Invicta |
| Prekės ženklas | ASETEK |
| Maksimalus sukimo momentas | 27 Nm |
| Rezoliucija | 0.000085 degrees (approx. 4,000,000 steps per revolution) |
| Suderinami įrenginiai | PC |
| Valdiklio tipas | Vairas |
| Ryšio technologija | USB |
| Maitinimo šaltinis | „110-240 V AC“ |
| Spalva | Juoda |
| Gamintojas | Asetek SimSports |
| GTIN / UPC | 850015843181 |
7. Informacija apie garantiją
The ASETEK Invicta Direct Drive Wheelbase is covered by a manufacturer's warranty. Please refer to the official Asetek SimSports websvetainėje rasite naujausias ir išsamias garantijos sąlygas.
Svarbi pastaba: Using aftermarket power supplies with the Invicta Wheelbase will void the product warranty. Always use the original 400W power supply provided by Asetek SimSports.
For warranty claims or service, retain your proof of purchase and contact Asetek SimSports customer support.
8. Pagalba klientams
For further assistance, technical support, or to report issues not covered in this manual, please contact Asetek SimSports customer support through their official channels:
- Websvetainė: Visit the official Asetek SimSports webDUK, pagalbos straipsnių ir kontaktinių formų svetainė.
- RaceHub Software: Utilize the support features within the RaceHub application for software-related inquiries.
Always provide your product model (Invicta Direct Drive Wheelbase 27Nm) and any relevant error messages or descriptions of the issue when seeking support.
