Swim & Fun UFO FX3 Pool Robot User Manual

1. Įvadas

Thank you for choosing the Swim & Fun UFO FX3 Pool Robot. This wireless pool cleaner is designed to efficiently clean the bottom of your pool, providing a hassle-free maintenance experience. Its compact design, LED lighting, and intelligent navigation make it an ideal solution for keeping your pool sparkling clean. Please read this manual thoroughly before operating the device to ensure safe and optimal performance.

2. Saugos instrukcijos

Naudodamiesi elektriniais prietaisais, ypač šalia vandens, visada laikykitės pagrindinių saugos priemonių.

• Ensure the charging adapter is connected to a grounded outlet.
• Do not operate the robot if the power cord or plug is damaged.
• Keep children and pets away from the pool area when the robot is in operation.
• Do not enter the pool while the robot is cleaning.
• Naudokite tik originalų įkrovimo adapterį, pateiktą kartu su įrenginiu.
• Nebandykite patys ardyti ar taisyti roboto. Kreipkitės į kvalifikuotus techninės priežiūros darbuotojus.
• Always remove the robot from the pool before adding chemicals or performing maintenance.
• The robot is designed for private use only. For commercial use, specific warranty terms apply.
• An audible signal will sound if the robot exits the water while still powered on. This is a safety feature.

3. Produktas baigtasview

3.1 Komponentai

The Swim & Fun UFO FX3 Pool Robot consists of several key components designed for efficient pool cleaning.

Figure 3.1: Swim & Fun UFO FX3 Pool Robot, top view with handle.

3.2 pav.: sprogo view of the UFO FX3 Pool Robot, showing internal components such as the motor, filter, and chassis.

3.3 pav. Apačia view of the UFO FX3 Pool Robot, illustrating the internal structure and wheel placement.

3.2 Pagrindinės savybės

• Belaidis veikimas: No cables to manage, making it easy to deploy and retrieve.
• LED apšvietimas: Integrated LED lights illuminate the robot during operation, visible through the transparent blue cover.
• Efektyvus valymas: Cleans pool floors up to 50 m² and 2 meters deep in a single 90-minute cycle.
• Smulkusis filtravimas: Capable of filtering particles as small as 0.18 mm.
• Suderinamas su sūriu vandeniu: Suitable for use in saltwater pools.
• Automatinis sustabdymas: Features an automatic stop function for convenience and safety.
• Pažangi navigacija: Equipped with smart navigation for thorough cleaning.

4. Sąranka

4.1 Pradinis įkrovimas

1. Before first use, fully charge the robot.
2. Connect the charging adapter to the robot's charging port.
3. Plug the adapter into a standard electrical outlet (100-240V AC).
4. The charging indicator light will show the charging status. A full charge takes approximately 5-6 hours.
5. Ensure the charging ambient temperature is between 0°C and 45°C.

4.2 Baseino paruošimas

• Ensure the pool water temperature is between 10°C and 35°C.
• Remove any large debris from the pool floor that could obstruct the robot.
• The robot is designed for flat-bottom pools and vinyl-coated surfaces.

5. Naudojimo instrukcijos

5.1 Starting the Robot

1. Once fully charged, ensure the robot is powered off before placing it in the water.
2. Carefully lower the robot into the pool. It will sink to the bottom.
3. Power on the robot. It will begin its cleaning cycle automatically.
4. The robot will clean the pool floor for up to 90 minutes per cycle.

5.2 Eksploatacijos metu

• The robot will navigate intelligently to cover the pool floor.
• The integrated LED lights will be active during operation.
• Do not interfere with the robot while it is cleaning.

5.3 Retrieving the Robot

• The robot will automatically stop after its cleaning cycle.
• Use the retrieval hook or handle to carefully lift the robot out of the water.
• Allow excess water to drain from the robot before placing it on a dry surface.
• If the robot is still powered on when removed from water, an audible alarm will sound. Power it off.

6. Priežiūra

6.1 Filtro valymas

Regular cleaning of the filter is crucial for maintaining the robot's performance.

1. After each cleaning cycle, open the robot to access the filter compartment.
2. Išimkite filtrą.
3. Rinse the filter thoroughly with a garden hose until all debris is removed.
4. Ensure the filter is clean and dry before reassembling the robot.

6.2 Saugykla

• Robotą laikykite vėsioje, sausoje vietoje, apsaugotoje nuo tiesioginių saulės spindulių ir ekstremalių temperatūrų.
• Ensure the robot is clean and dry before storing for extended periods.
• Jei akumuliatorių ilgesnį laiką sandėliuojate, periodiškai jį įkraukite, kad palaikytumėte jo būklę.

7. Problemų sprendimas

Šiame skyriuje aptariamos dažniausiai pasitaikančios problemos, su kuriomis galite susidurti.

8. Specifikacijos

9. Informacija apie garantiją

This Swim & Fun UFO FX3 Pool Robot is intended for private use only.

Už komerciniam naudojimui, the warranty period is limited to 90 dienų nuo pirkimo datos.

Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects under normal use conditions. Damage resulting from misuse, neglect, unauthorized repairs, or failure to follow instructions in this manual is not covered.

10. Pagalba ir kontaktai

For further assistance, technical support, or spare parts, please contact Swim & Fun customer service.

Visit the official Swim & Fun websvetainę, kurioje rasite naujausią kontaktinę informaciją ir pagalbos išteklius.

Websvetainė: www.swim-fun.com