Blackmagic Design DeckLink IP/SDI HD Instruction Manual

1. Įvadas

This manual provides essential information for the installation, operation, and maintenance of your Blackmagic Design DeckLink IP/SDI HD capture and playback card. Please read these instructions carefully before using the device to ensure proper functionality and to prevent damage.

2. Produktas baigtasview

The Blackmagic Design DeckLink IP/SDI HD is a high-performance capture and playback solution designed for professional video workflows. It features dual channels for 2110 IP connectivity via RJ45 Ethernet, alongside two configurable 3G-SDI connections and a reference output. This card supports high-quality video formats including Apple ProRes, DNxHD, and 10-bit uncompressed video, with support for 525i, 625i, 720p, 1080i, and 1080p video standards up to 1080p60.

Figure 1: Blackmagic Design DeckLink IP/SDI HD card. This image shows the capture card with its various input/output ports, including SDI and Ethernet connections.

3. Sąranka

3.1. Techninės įrangos diegimas

1. Išjungti: Ensure your computer is completely powered off and disconnected from the main power supply.
2. Atvira byla: Open your computer case to access the PCIe slots.
3. Įdėkite kortelę: Carefully insert the DeckLink IP/SDI HD card into an available PCIe slot. Ensure it is seated firmly.
4. Saugi kortelė: Secure the card with the retaining screw or clip provided by your computer case.
5. Uždaryti bylą: Close your computer case and reconnect the power supply.

3.2. Programinės įrangos diegimas

After hardware installation, you must install the Blackmagic Design Desktop Video software. This software includes drivers and utilities necessary for the DeckLink card to function.

• Parsisiųsti: Visit the official Blackmagic Design support websvetainė (www.blackmagicdesign.com/support/) and download the latest Desktop Video software for your operating system (Windows, macOS, or Linux).
• Įdiegti: Run the installer and follow the on-screen prompts. You may be required to restart your computer after installation.
• Konfigūracija: Use the Blackmagic Desktop Video Setup utility to configure your card's settings, including video formats and audio routing.

3.3. Prietaisų prijungimas

Connect your video sources and destinations to the DeckLink IP/SDI HD card using appropriate cables.

• 3G-SDI: Connect SDI devices to the two configurable 3G-SDI ports. These ports can be set for input or output via the Desktop Video Setup utility.
• 2110 IP: Connect to your 2110 IP network via the RJ45 Ethernet ports. Ensure your network infrastructure is configured for ST 2110.
• Nuoroda: Connect a video reference signal (e.g., black burst or tri-sync) to the reference input for synchronization with other studio equipment.

4. Naudojimo instrukcijos

The DeckLink IP/SDI HD operates in conjunction with professional video software applications. The Desktop Video software provides the necessary drivers and a control panel for basic settings.

4.1. Vaizdo įrašymas

1. Pasirinkite įvestį: In your video software (e.g., DaVinci Resolve, Adobe Premiere Pro), select the DeckLink IP/SDI HD as your video input device.
2. Konfigūruoti nustatymus: Match the video format, resolution, and frame rate in your software to the incoming signal and the settings configured in the Desktop Video Setup utility.
3. Start Capture: Initiate capture within your chosen video application.

4.2. Vaizdo įrašų atkūrimas

1. Pasirinkite išvestį: In your video software, select the DeckLink IP/SDI HD as your video output device.
2. Konfigūruoti nustatymus: Ensure the output format, resolution, and frame rate in your software match the capabilities of your monitoring device and the settings in Desktop Video Setup.
3. Pradėti atkūrimą: Begin playback from your video application.

4.3. Supported Video Standards

The DeckLink IP/SDI HD supports a range of video standards:

• 525i (NTSC)
• 625i (PAL)
• 720p (up to 720p60)
• 1080i (up to 1080i60)
• 1080p (up to 1080p60)

It also supports popular video formats such as Apple ProRes, DNxHD, and 10-bit uncompressed video.

5. Priežiūra

The DeckLink IP/SDI HD card requires minimal maintenance. Keep the computer environment clean and dust-free to ensure optimal performance and longevity of the card.

• Valymas: Periodically clean the interior of your computer case to prevent dust buildup on the card's components. Use compressed air for this purpose.
• Programinės įrangos atnaujinimai: Regularly check the Blackmagic Design support website for updated Desktop Video software. Keeping your drivers current ensures compatibility and access to the latest features and bug fixes.

6. Problemų sprendimas

If you encounter issues with your DeckLink IP/SDI HD, consider the following troubleshooting steps:

• Nėra vaizdo įvesties / išvesties:
  • Patikrinkite, ar visi kabeliai yra tvirtai prijungti.
  • Check that the correct input/output is selected in your video software and the Desktop Video Setup utility.
  • Ensure the video format and frame rate settings match between your source/destination and the DeckLink card.
  • Įsitikinkite, kad šaltinio įrenginys skleidžia signalą.
• Programinė įranga neaptinka kortelės:
  • Ensure the Desktop Video software is installed correctly and is the latest version.
  • Iš naujo paleiskite kompiuterį.
  • Check Device Manager (Windows) or System Information (macOS) to see if the card is recognized by the operating system.
  • Re-seat the card in its PCIe slot.
• IP Connectivity Issues:
  • Verify network cable connections.
  • Ensure your network is properly configured for ST 2110.
  • Check IP settings in the Desktop Video Setup utility.

For further assistance, refer to the Blackmagic Design support websvetainėje arba susisiekite su jų technine pagalba.

7. Specifikacijos

8. Garantija ir palaikymas

For detailed warranty information, please refer to the documentation included with your product or visit the official Blackmagic Design website. Blackmagic Design provides comprehensive technical support and resources.

• Oficialus palaikymas Websvetainė: www.blackmagicdesign.com/support/
• Produkto registracija: Register your product on the Blackmagic Design websvetainę, kurioje rasite atnaujinimus ir palaikymą.