DIGITUS DN-45004

Digitus DN-45004 Mobile Desktop Charging Cabinet User Manual

Model: DN-45004 | 10 USB-C Ports with UV Lamp

1. Įvadas

The DIGITUS DN-45004 Mobile Desktop Charging Cabinet is designed for storing and charging portable devices such as tablets and smartphones. It features 10 USB-C charging ports and an integrated UV-C lamp for enhanced hygiene. This cabinet is suitable for public institutions like schools, providing a centralized and secure location for device management and charging.

2. Saugos įspėjimai

3. Pakuotės turinys

Patikrinkite, ar pakuotėje yra visi reikalingi daiktai:

4. Sąranka

  1. Išpakavimas: Carefully remove the charging cabinet from its packaging.
  2. Vieta: Place the cabinet on a flat, stable, and dry surface. Ensure adequate ventilation around the unit. The anti-slip feet provide stability.
  3. Maitinimo jungtis: Connect the provided power cable to the C19 input on the rear of the cabinet and then to a suitable electrical outlet (110/220 VAC, 50/60 Hz).
  4. Initial Power Check: If the unit does not power on, check the internal circuit breaker located behind the rear panel. This breaker may trip during transport. To access, unscrew the four screws on the rear panel, remove it, and reset the blue lever on the circuit breaker to the 'On' position.
Vidinis view of the Digitus DN-45004 charging cabinet showing the circuit breaker and internal wiring.
4.1 pav. Vidinis view showing the circuit breaker. If the unit does not power on, check this component.

5. Naudojimo instrukcijos

5.1 Įkrovimo įrenginiai

  1. Atidaryk duris: Use the provided keys to unlock and open the front door of the cabinet.
  2. Įdėkite įrenginius: Place your tablets or smartphones into the designated slots. Note that this cabinet is primarily designed for tablets and smartphones; larger laptops may not fit.
  3. Connect to USB-C Ports: Connect your devices to the USB-C charging ports located at the front of each slot.
  4. Monitoriaus įkrovimo būsena: Integrated LED indicators above each port show the charging status:
    • Raudona: Įrenginys šiuo metu kraunamas.
    • Žalia: Charging process is complete, or no device is connected.
  5. Uždaryti ir užrakinti: Once devices are connected, close and lock the front door for security.
Priekyje view of the Digitus DN-45004 charging cabinet with labels for LED charging indicator, UV-C lighting switch, and USB-C charging port.
5.1 pav. Baigtaview of the charging cabinet features, including LED indicators and USB-C ports.
Interjeras view of the Digitus DN-45004 charging cabinet with multiple tablets connected to USB-C cables and charging.
Figure 5.2: Devices being charged inside the cabinet.

5.2 UV-C Lamp Operacija

The integrated UV-C lamps provide a sterile environment for your devices.

  1. Activate UV-C: Locate the switch for UV-C lighting (refer to Figure 5.1). Toggle the switch to activate the UV-C lamps.
  2. Ensure Door is Closed: For safety and effective sanitation, ensure the cabinet door is securely closed while the UV-C lamp yra aktyvus.
  3. Deactivate UV-C: Toggle the switch again to turn off the UV-C lamps.
Interjeras view of the Digitus DN-45004 charging cabinet with the UV-C lamp illuminated, showing a blue glow.
Figure 5.3: Interior with UV-C light active.
Iš arti view UV-C lamp installed inside the Digitus DN-45004 charging cabinet.
Figure 5.4: Close-up of the UV-C lamp.

5.3 Aušinimo sistema

The cabinet includes an integrated fan and ventilation slots for active cooling. The fan automatically activates when the internal temperature exceeds 40°C to prevent overheating of devices and internal components.

6. Priežiūra

7. Problemų sprendimas

ProblemaGalima priežastisSprendimas
Cabinet does not power on.Power cable not connected, power outlet issue, or internal circuit breaker tripped.Ensure power cable is firmly connected. Test the power outlet. Check and reset the internal circuit breaker (refer to Section 4. Setup).
Įrenginys neįkraunamas.Device not properly connected, faulty USB-C cable, or device issue.Ensure the device is correctly plugged into the USB-C port. Try a different USB-C cable. Test the device with another charger. Check the LED indicator (should be red when charging).
UV-C lamp neįsijungia.UV-C switch off, lamp failure, or door not fully closed.Ensure the UV-C switch is in the 'On' position. Verify the cabinet door is securely closed. If the issue persists, the lamp gali prireikti pakeitimo.
Laptops do not fit in the slots.The cabinet is designed for smaller portable devices.This model is optimized for tablets and smartphones. Please check device dimensions against cabinet specifications.

8. Specifikacijos

FunkcijaDetalė
Prekės ženklasDIGITUS
Modelio numerisDN-45004
SpalvaJuoda (RAL 9005)
MedžiagaLegiruotasis plienas
Matmenys (A x P x G)345 x 360 x 370 mm
Vidinis lentynos gylis294 mm
USB-C įkrovimo prievadai10
USB-C Output per Port18 W (5 V / 3 A, 9 V / 2 A, 12 V / 1.5 A)
Max USB-C Output180 W
Maitinimo įvestisC19; 110 / 220 VAC, 50/60 Hz, 16 A
Bendra galia3500 W
AušinimasIntegrated fan, automatic activation at >40°C
SaugumasSteel front door with 3-point lock
Ypatingos savybėsUV-C lamps for hygiene, LED charging indicators
Suderinami įrenginiaiIšmanieji telefonai, planšetiniai kompiuteriai

9. Garantija ir palaikymas

Warranty information for the Digitus DN-45004 Mobile Desktop Charging Cabinet is not available in the provided product data. Please refer to the manufacturer's official webIšsamias garantijos sąlygas ir nuostatas rasite svetainėje arba pirkimo vietoje.

For technical support, troubleshooting assistance, or inquiries regarding spare parts, please contact DIGITUS customer service directly. You can often find contact information on the manufacturer's websvetainėje arba produkto pakuotėje.

For more information about DIGITUS solutions, visit: Assmann Solutions