Skaitmeninis temperatūros reguliatoriaus termostatas

1. Įvadas

The REDPINGUO Temp-01 Digital Temperature Controller Thermostat is an advanced, easy-to-use device designed to precisely control temperature for a wide range of applications. It features both heating and cooling modes, along with versatile timing functions, making it suitable for environments requiring stable temperature regulation such as homebrewing, greenhouses, terrariums, incubators, and more.

2. Produkto ypatybės

• Išmanusis termostatas: Features Heating & Cooling modes with a 1.7m NTC 10K temperature sensor probe. Automatically activates or deactivates connected devices based on your preset target temperatures, ensuring consistent comfort and energy efficiency.
• Lengvas montavimas ir valdymas: A plug-and-play unit requiring no complex installation or wiring. Simply plug it into a standard 110V AC outlet.
• Platus temperatūros diapazonas: Controls temperatures from -40℃ to 120℃ (-40℉ to 248℉) with an accuracy of ±1℃.
• Dual Display Units: Allows selection between Celsius (℃) or Fahrenheit (℉) temperature display on the LCD.
• Išplėstinės laiko nustatymo funkcijos: Includes F01 Cycle Timer mode, F02 Countdown ON mode, F03 Countdown OFF mode, and F04 Countdown ON and Countdown OFF mode. Timing range is 0 to 99 hours and 59 minutes.
• Platus pritaikymas: Suitable for various uses including greenhouses, reptile habitats, incubators, terrariums, freezers, refrigerators, heaters, and homebrew setups.
• Temperatūros kalibravimas: Allows for fine-tuning of temperature readings to ensure accuracy.
• Ekrano užrakto apsauga: Apsaugo nuo atsitiktinio nustatymų pakeitimo.
• Atminties funkcija: All current settings are automatically saved and retained even after a power outage.
• Gamykliniai nustatymai: Option to restore the device to its original factory settings.

3. Pakuotės turinys

• 1 x REDPINGUO Digital Temperature Controller Thermostat (Model: Temp-01) with integrated 1.7m NTC 10K Sensor

4. Produktas baigtasview

The REDPINGUO Temp-01 thermostat features a clear LCD display, intuitive control buttons, a built-in power outlet, and a wired temperature sensor probe.

1 pav.: priekis view of the thermostat with its display and integrated power outlet.

Figure 2: Close-up of the control panel, highlighting the display and buttons.

3 pav.: galinis view of the thermostat, displaying product information and the power plug.

5. Sąranka

1. Išpakuoti: Carefully remove the thermostat from its packaging.
2. Prijunkite: Insert the thermostat's plug into a standard 110V AC power outlet. The LCD display will illuminate.
3. Padėties jutiklis: Place the 1.7m temperature sensor probe in the area where you wish to monitor and control the temperature. Ensure the probe is not directly exposed to heat sources or extreme cold that could skew readings.
4. Prijunkite įrenginį: Plug your heating or cooling appliance into the power outlet on the front of the thermostat.

Figure 4: The thermostat unit plugged into a power source, ready for use.

6. Naudojimo instrukcijos

The thermostat offers both temperature control and various timing functions. Use the 'MODE', 'SET', 'UP', and 'DOWN' buttons to navigate and adjust settings.

6.1. Temperatūros valdymo režimas

1. View Dabartinė temperatūra: The top line of the LCD displays the 'Measured Temperature'.
2. Set Start Temperature (ON): Press the 'SET' button once. The 'Start Temperature' value will flash. Use 'UP' or 'DOWN' buttons to adjust the desired temperature for the device to turn ON. Press 'SET' again to confirm.
3. Set Stop Temperature (OFF): After setting the Start Temperature, press 'SET' again. The 'Stop Temperature' value will flash. Use 'UP' or 'DOWN' buttons to adjust the desired temperature for the device to turn OFF. Press 'SET' again to confirm and exit setting mode.
4. Šildymo režimas: If the 'Start Temperature' is set lower than the 'Stop Temperature', the thermostat operates in heating mode. The connected device will turn on when the measured temperature drops below the Start Temperature and turn off when it reaches the Stop Temperature.
5. Aušinimo režimas: If the 'Start Temperature' is set higher than the 'Stop Temperature', the thermostat operates in cooling mode. The connected device will turn on when the measured temperature rises above the Start Temperature and turn off when it drops to the Stop Temperature.
6. Switch ℃/℉: Press and hold the 'UP' button for 3 seconds to toggle between Celsius (℃) and Fahrenheit (℉).

6.2. Timing Functions

Press the 'MODE' button repeatedly to cycle through the different timing modes (F01, F02, F03, F04) and the temperature control display.

5 pav. Baigtaview of the timing function displays and their corresponding modes.

1. F01: Ciklo laikmačio režimas
   In this mode, you set an ON duration and an OFF duration for the connected device to cycle repeatedly. Press 'SET' to enter editing, use 'UP'/'DOWN' to adjust hours/minutes for ON time, then press 'SET' to move to OFF time, adjust, and press 'SET' again to confirm.
2. F02: Atgalinio skaičiavimo režimas ĮJUNGTAS
   The device will turn ON after a set countdown period. Press 'SET' to enter editing, use 'UP'/'DOWN' to set the countdown hours/minutes, then press 'SET' to confirm.
3. F03: Atgalinio skaičiavimo IŠJUNGIMO režimas
   The device will turn OFF after a set countdown period. Press 'SET' to enter editing, use 'UP'/'DOWN' to set the countdown hours/minutes, then press 'SET' to confirm.
4. F04: Countdown ON and Countdown OFF Mode
   This mode combines F02 and F03. You set a countdown for the device to turn ON, and then a separate countdown for it to turn OFF. Press 'SET' to enter editing, set the ON countdown, press 'SET', then set the OFF countdown, and press 'SET' again to confirm.

6.3. Temperatūros kalibravimas

If the measured temperature is inaccurate, you can calibrate the sensor. Press and hold the 'SET' button for 3 seconds to enter the calibration menu. Use 'UP' or 'DOWN' to adjust the offset value (e.g., +0.5℃ or -0.5℉). Press 'SET' to save and exit.

6.4. Screen Lock Protection

To prevent accidental changes, the screen can be locked. Press and hold the 'MODE' button for 3 seconds to lock or unlock the screen. A lock icon may appear on the display when locked.

6.5. Atminties funkcija

The thermostat is equipped with a memory function. All your configured settings (temperature and timing modes) will be automatically saved and restored in case of a power interruption.

6.6. Gamyklinių parametrų atkūrimas

To restore the thermostat to its original factory settings, press and hold the 'DOWN' button for 3 seconds. Confirm the reset if prompted.

7. Priežiūra

• Valymas: Nuvalykite įrenginį minkštu, sausu skudurėliu. Nenaudokite abrazyvinių valiklių ir nemerkite įrenginio į vandenį.
• Jutiklio priežiūra: Ensure the temperature sensor probe is kept clean and free from debris for accurate readings. Avoid bending or damaging the sensor cable.
• Saugykla: Jei termostato nenaudojate ilgesnį laiką, laikykite jį vėsioje, sausoje vietoje, apsaugotoje nuo tiesioginių saulės spindulių ir ekstremalių temperatūrų.

8. Problemų sprendimas

• Ekranas neveikia: Ensure the unit is properly plugged into a live 110V AC outlet. Check the power source.
• Netikslus temperatūros rodmuo: Verify the temperature sensor probe is correctly positioned and not damaged. Perform a temperature calibration (refer to Section 6.3).
• Įrenginys neįsijungia/neišsijungia: Check that the Start and Stop temperatures are set correctly for either heating or cooling mode. Ensure the connected appliance is functioning properly and is plugged securely into the thermostat's outlet.
• Nustatymai neišsaugomi: The unit has a memory function. If settings are not retained, ensure the unit is not being subjected to extreme electrical fluctuations.

9. Specifikacijos

10. Garantija ir palaikymas

For warranty information, technical support, or service inquiries, please refer to the documentation included with your product packaging or visit the official REDPINGUO websvetainę. Išsaugokite pirkimo čekį garantiniams reikalavimams.