Sanus Speaker Wall Mounts for Sonos Era 100 (Model WSWME12)

1. Įvadas

This manual provides detailed instructions for the installation, operation, and maintenance of your Sanus Speaker Wall Mounts (Model WSWME12) designed specifically for Sonos Era 100 speakers. Please read these instructions carefully before beginning installation to ensure proper setup and safe use of the product.

2. Produkto ypatybės

Integruotas dizainas: Engineered to seamlessly complement the Sonos Era 100 speaker's aesthetic.
Greitas montavimas: Designed for an easy DIY installation, typically completed within 15 minutes.
Reguliuojamas padėties nustatymas: Offers tool-free tilt adjustment from 7 degrees up to 32 degrees down, and swivel adjustment of 72 degrees left or right for optimal sound direction.
Lanksčios montavimo parinktys: Supports both upright and inverted speaker placement to suit various room layouts and acoustic needs.
Saugus priedas: Utilizes a bottom threaded insert for safe and secure speaker mounting.

3. Saugos informacija

Always ensure that the mounting surface can support the weight of the speaker and the mount. Use appropriate hardware for your wall type (e.g., wood stud, concrete, drywall). If you are unsure about the installation process or wall compatibility, consult a qualified professional. Do not exceed the maximum weight capacity of the mount. Keep small parts away from children.

4. Sąranka ir diegimas

Follow these steps for a secure and efficient installation of your Sanus Speaker Wall Mounts:

Paruoškite montavimo vietą: Choose a suitable wall location, considering speaker placement for optimal sound and power outlet accessibility. Ensure there are no hidden electrical wires or plumbing in the wall at the drilling location.
Pritvirtinkite sieninę plokštę: Secure the wall plate to the desired location using the provided hardware. For wood studs, drill pilot holes and use wood screws. For drywall, use appropriate anchors and screws. Ensure the plate is level before tightening.
Assemble Speaker Bracket: Attach the speaker bracket to the wall plate. Refer to the diagram below for visual guidance on how the bracket connects to the wall mount.
Connect Speaker: Carefully align your Sonos Era 100 speaker with the bracket. The bottom threaded insert on the speaker will secure it to the mount. Ensure the speaker is firmly attached.
Kabelių valdymas: Route the speaker's power cable through the integrated cable management channels on the mount for a clean and organized appearance.

Diagram showing the speaker mounting bracket components. — Figure 4.1: Speaker mounting bracket components.

Image showing a Sonos Era 100 speaker attached to the wall mount. — Figure 4.2: Sonos Era 100 speaker attached to the wall mount.

Image demonstrating cable management with the speaker mount. — Figure 4.3: Integrated cable management for a tidy setup.

5. Naudojimo instrukcijos (reguliavimas)

The Sanus Speaker Wall Mount allows for flexible positioning of your Sonos Era 100 speakers to optimize your audio experience.

Pakreipimo reguliavimas: The speaker can be tilted 7 degrees upwards or 32 degrees downwards. Gently push or pull the speaker to achieve the desired vertical angle.
Sukimosi reguliavimas: The speaker can be swiveled 72 degrees to the left or right. Rotate the speaker horizontally to direct sound as needed.

All adjustments are tool-free, allowing for easy fine-tuning of your speaker's direction.

Diagram illustrating the tilt and swivel range of the speaker mount. — Figure 5.1: Tilt (7° up, 32° down) and Swivel (73° left/right) adjustment ranges.

Image showing a hand adjusting the tilt of a mounted speaker. — Figure 5.2: Effortless tilt adjustment for optimal sound.

6. Priežiūra

To maintain the appearance and functionality of your speaker mounts:

Laikiklį valykite minkštu, sausu skudurėliu. Venkite abrazyvinių valiklių ar tirpiklių.
Periodically check all mounting screws and connections to ensure they remain tight and secure.

7. Problemų sprendimas

If you encounter any issues with your speaker mounts, consider the following:

Laikiklis jaučiasi laisvas: Re-check and tighten all mounting screws on the wall plate and the speaker bracket. Ensure the wall material is appropriate for the chosen hardware.
Koregavimo sunkumai: Ensure no cables are obstructing the movement of the mount. Apply gentle, even pressure when adjusting tilt or swivel.
Speaker not level: Verify that the wall plate was installed level. Minor adjustments can often be made by slightly loosening and re-tightening the bracket screws.

8. Specifikacijos

Funkcija	Detalė
Gaminio matmenys	7.36 x 3.94 x 6.29 colio (18.7 x 10 x 16 cm)
Prekės svoris	2.68 svaro (1.22 kg)
Modelio numeris	WSWME12
Suderinami įrenginiai	Sonos Era 100 Speakers
Montavimo tipas	Sieninis laikiklis
Spalva	Juoda
Pakreipimo diapazonas	7° Up / 32° Down
Pasukamas diapazonas	72° Left / 72° Right

Diagram showing the dimensions of the speaker mount. — Figure 8.1: Key dimensions of the Sanus WSWME12 mount.

9. Garantija ir palaikymas

Sanus products are designed and engineered in the U.S. with over 30 years of experience in audio-visual mounting solutions. This product comes with a limited warranty. For any questions, installation assistance, or troubleshooting, Sanus offers U.S.-based expert customer care available 7 days a week.

For support, please visit the official Sanus websvetainėje arba susisiekite tiesiogiai su jų klientų aptarnavimo tarnyba.

	SANUS BSSEA2 reguliuojamo aukščio garsiakalbių stovas, skirtas „Sonos Era 100/300“ – montavimo vadovas Oficiali SANUS BSSEA2 reguliuojamo aukščio garsiakalbių stovo, skirto „Sonos Era 100“ ir „Era 300“ garsiakalbiams, naudojimo instrukcija. Į komplektą įeina saugos instrukcijos, dalių sąrašas, matmenys ir nuoseklus surinkimo vadovas.
	SANUS WSSE1A1/WSSE1A2 Height-Adjustable Speaker Stand for Sonos Era 100 - Instruction Manual This document provides detailed instructions for assembling and using the SANUS WSSE1A1 and WSSE1A2 height-adjustable speaker stands, designed specifically for Sonos Era 100 speakers. It includes essential safety warnings, product dimensions, a list of parts and hardware, step-by-step assembly guidance, and instructions for height adjustment and cable management.
	SANUS WSSE3A1/WSSE3A2 reguliuojamo aukščio garsiakalbių stovas, skirtas „Sonos Era 300™“ – naudojimo instrukcija Išsamios SANUS WSSE3A1/WSSE3A2 aukščio reguliuojamo garsiakalbių stovo, skirto „Sonos Era 300™“ garsiakalbiams, surinkimo ir naudojimo instrukcijos. Įtraukta saugos informacija, dalių sąrašas ir nuoseklios surinkimo instrukcijos.
	SANUS WSS21/WSS22 garsiakalbių stovo naudojimo instrukcija Oficiali SANUS WSS21 ir WSS22 garsiakalbių stovų, skirtų „Sonos One“, „PLAY:1“ ir „PLAY:3“ garsiakalbiams, naudojimo instrukcija. Apima surinkimo veiksmus, saugos informaciją ir matmenis.
	SANUS WSFME11/WSFME12 fiksuotas garsiakalbio sieninis laikiklis, skirtas „Sonos Era 100™“ – naudojimo instrukcija This instruction manual provides detailed steps for installing the SANUS WSFME11 and WSFME12 fixed speaker wall mounts for Sonos Era 100™ speakers. It includes important safety information, a list of supplied parts and hardware, required tools, and step-by-step installation guides for drywall, wood stud, and concrete wall types, along with removal instructions and product dimensions.
	SANUS WSSE3A1/WSSE3A2 Height-Adjustable Speaker Stand for Sonos Era 300 - Instruction Manual Official instruction manual for the SANUS WSSE3A1/WSSE3A2 height-adjustable speaker stand designed for the Sonos Era 300 speaker. Includes safety information, parts list, dimensions, and step-by-step assembly instructions.

Sanus WSWME12