1. Įvadas
This manual provides detailed instructions for the installation, operation, and maintenance of your FSP Dagger Pro 850W SFX Power Supply. The FSP Dagger Pro series is designed for small form factor (SFX) systems, offering high efficiency and reliable power delivery for demanding components.
Key features of the FSP Dagger Pro 850W SFX Power Supply include:
- ATX 3.1 / PCIe 5.1 Compliance: Equipped with a native 12VHPWR connector and cable, supporting the latest generation hardware power demands.
- Visiškai modulinis dizainas: Allows for connecting only necessary cables, improving airflow and reducing cable clutter within compact PC builds.
- Compact SFX Form Factor: Compatible with most Mini-ITX and Micro ATX cases, ideal for small form factor PCs.
- 80 PLUS Gold Certified Efficiency: Achieves over 90% efficiency at typical loads, contributing to lower power consumption, reduced heat output, and quieter operation.
- Vieno +12 V bėgelio konstrukcija: Provides full power to VGA cards individually, preventing overloading conditions.
Image 1.1: FSP Dagger Pro 850W SFX Power Supply, showcasing its compact design and modular cable interface.
2. Saugos informacija
WARNING: Improper installation or use can result in serious injury or damage to equipment. Please read and follow all instructions carefully.
- Always disconnect the power cord from the wall outlet before installing, removing, or cleaning the power supply.
- Neatidarykite maitinimo bloko. Didelis garsas.tagViduje yra dalių ir nėra dalių, kurias galėtų taisyti vartotojas. Atidarius įrenginį, garantija nebegalios.
- Ensure the power supply is installed in a well-ventilated area. Do not block any ventilation openings.
- Use only the modular cables provided with this power supply. Using third-party cables may cause damage to the PSU or connected components.
- This product is designed for use in computer systems. Do not use it for any other purpose.
- Maitinimo šaltinį laikykite atokiau nuo vandens, drėgmės ir ekstremalių temperatūrų.
3. Pakuotės turinys
Patikrinkite, ar jūsų pakuotėje yra šie elementai:
- FSP Dagger Pro 850W SFX Power Supply Unit
- Modular Cable Set (including 12VHPWR, Motherboard 24-pin, CPU 8-pin, PCIe 6+2-pin, SATA, Peripheral)
- Kintamosios srovės maitinimo laidas
- Tvirtinimo varžtai
- Vartotojo vadovas (šis dokumentas)
Image 3.1: Illustration of the compact dimensions of the Dagger Pro PSU and the included modular cable set.
4. Sąranka ir diegimas
Follow these steps to install your FSP Dagger Pro 850W SFX Power Supply into your computer system.
4.1. Fizinis įrengimas
- Paruoškite savo sistemą: Ensure your computer is powered off and the power cord is disconnected from the wall outlet. Open your computer case to access the power supply mounting area.
- Remove old PSU (if applicable): If replacing an existing power supply, disconnect all cables from components and remove the old PSU from the case.
- Mount the new PSU: Carefully place the FSP Dagger Pro 850W into the SFX power supply bay of your case. Secure it using the provided mounting screws. Ensure the fan is oriented correctly for optimal airflow, typically facing inwards or downwards depending on case design.
Image 4.1: The FSP Dagger Pro PSU mounted in a system, highlighting the rear power switch and AC input.
4.2. Kabelių jungtys
The Dagger Pro 850W is a fully modular power supply. Connect only the cables required for your system components.
4.2 pav.: Išsamus view of the modular cable connection panel on the PSU.
- Motherboard Power (24-pin): Connect the 24-pin ATX cable from the PSU to the corresponding port on your motherboard. Ensure it clicks into place.
- CPU Power (4+4-pin or 8-pin): Connect the CPU power cable(s) from the PSU to the CPU power connector(s) on your motherboard. High-end motherboards may require two 8-pin connectors.
- PCIe Power (6+2-pin or 12VHPWR):
- For graphics cards requiring 6-pin or 8-pin PCIe connectors, use the provided 6+2-pin cables.
- For NVIDIA RTX 40 series graphics cards or other GPUs requiring the new 12VHPWR connector, use the dedicated 12VHPWR cable. Ensure it is fully seated into both the PSU and the graphics card.
Image 4.3: The 12VHPWR connector on the Dagger Pro PSU, designed for modern high-power graphics cards.
- SATA galia: Prijunkite SATA maitinimo laidus prie SSD, HDD ir optinių diskų.
- Periferinė galia (Molex): Connect peripheral power cables for case fans, fan controllers, or other accessories that use Molex connectors.
- Kabelių valdymas: Tvarkingai išvedžiokite laidus, kad pagerintumėte oro cirkuliaciją ir pagerintumėte estetiką korpuse.
5. Naudojimo instrukcijos
Once all components are connected and secured, you can power on your system.
- Prijunkite kintamosios srovės maitinimą: Plug the AC power cord into the power supply's inlet and then into a wall outlet or surge protector.
- Maitinimo bloko įjungimas: Flip the power switch on the back of the power supply to the "ON" (I) position.
- Įjungimo sistema: Paspauskite kompiuterio korpuso maitinimo mygtuką.
5.1. Ventiliatoriaus veikimas (pusiau be ventiliatoriaus)
The FSP Dagger Pro 850W features a semi-fanless design for optimized low-noise operation. The fan will remain off (0dBA) under low load conditions (typically below 20% load or <25°C internal temperature). As the load increases, the fan will gradually spin up to maintain optimal temperatures, ensuring quiet operation when not under heavy demand.
Image 5.1: Fan operation curve illustrating the semi-fanless mode for reduced noise at low loads.
6. Priežiūra
Tinkama priežiūra užtikrina jūsų maitinimo šaltinio ilgaamžiškumą ir optimalų veikimą.
- Valymas: Periodically clean the exterior of the power supply and its fan grill to prevent dust buildup. Use compressed air to gently clear dust from the fan and vents. Always disconnect the power cord before cleaning.
- Oro srautas: Ensure that the power supply's intake and exhaust vents are not obstructed. Maintain good airflow within your computer case to prevent overheating.
- Kabelio apžiūra: Retkarčiais patikrinkite visas kabelių jungtis, kad įsitikintumėte, jog jos tvirtai pritvirtintos ir nepažeistos.
7. Problemų sprendimas
If you encounter issues with your FSP Dagger Pro 850W power supply, refer to the following common problems and solutions:
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Sistema neįsijungia. |
|
|
| Sistema įsijungia, bet iš karto išsijungia. |
|
|
| Ventiliatorius nesisuka. |
|
|
If the problem persists after trying these solutions, please contact FSP customer support.
8. Specifikacijos
Detailed specifications for the FSP Dagger Pro 850W SFX Power Supply (SDA2-850-G5):
| Funkcija | Detalė |
|---|---|
| Modelio pavadinimas | SFX PSU |
| Prekės modelio numeris | SDA2-850-G5 |
| Formos faktorius | SFX |
| Išėjimo vattage | 850 vatų |
| 80 PLUS sertifikatas | Auksas |
| ATX standartas | ATX 3.1 |
| PCIe standartas | PCIe 5.1 (with native 12VHPWR) |
| Moduliškumas | Pilnas modulinis |
| Aušinimo būdas | Oras (92 mm ventiliatorius, pusiau be ventiliatoriaus) |
| Gaminio matmenys (I x P x A) | 5 x 4 x 2.5 colio (125 x 100 x 63.5 mm) |
| Prekės svoris | 4.51 svaro (2.05 kilogramo) |
| Suderinami įrenginiai | Computer, PC |
| Gamintojas | FSP Group U.S.A |
Image 8.1: Explanation of the single +12V rail design for stable power to VGA cards.
9. Garantija ir palaikymas
The FSP Dagger Pro 850W SFX Power Supply comes with a 10 metų gamintojo garantija, užtikrinant ilgalaikį patikimumą ir ramybę. Ši garantija taikoma medžiagų ir gamybos defektams įprasto naudojimo sąlygomis.
For technical support, warranty claims, or further assistance, please visit the official FSP websvetainėje arba susisiekite su jų klientų aptarnavimo skyriumi. Išsaugokite pirkimo įrodymą, kad galėtumėte patvirtinti garantiją.
FSP Official Websvetainė: https://www.fsplifestyle.com/
