LEDONE 8FT LED Vapor Tight Light Instruction Manual

1. Įvadas

This manual provides detailed instructions for the safe installation, operation, and maintenance of your LEDONE 8FT LED Vapor Tight Light. Please read this manual thoroughly before installation and retain it for future reference. This fixture is designed for demanding environments requiring high resistance to water, dust, and corrosion, such as parking garages, car washes, cold storage, and industrial facilities.

2. Saugos informacija

ĮSPĖJIMAS: Elektros smūgio pavojus. Prieš montuodami ar atlikdami techninę priežiūrą, atjunkite maitinimą.

• Installation must be performed by a qualified electrician in accordance with the National Electrical Code (NEC) and local codes.
• Užtikrinkite tiekimo tūrįtage is compatible with the fixture's requirements (120-277Vac).
• Do not handle energized fixtures with wet hands or while standing on wet or damp paviršiai.
• Nebandykite modifikuoti ar ardyti įrenginio. Viduje nėra dalių, kurias galėtų aptarnauti vartotojas.
• Montavimo metu dėvėkite tinkamas asmenines apsaugos priemones (AAP).
• Įsitikinkite, kad tvirtinimo detalė yra tvirtai pritvirtinta, kad ji nenukristų.

3. Pakuotės turinys

Prieš tęsdami montavimą, patikrinkite, ar visi komponentai yra ir nepažeisti.

• LEDONE 8FT LED Vapor Tight Light Fixture
• Mounting Hardware (clips, screws, anchors)
• Instrukcijų vadovas (šis dokumentas)

4. Sąranka ir diegimas

4.1. Išankstinis montavimas

1. Išjunkite maitinimą: Locate the circuit breaker or fuse box and turn off the power supply to the installation area. Verify power is off using a voltage testeris.
2. Išpakuoti: Carefully remove the fixture from its packaging. Inspect for any shipping damage.
3. Pasirinkite Wattage and Color Temperature (CCT): Before mounting, adjust the wattage and CCT switches located on the fixture. These switches allow you to select between 60W, 80W, or 100W and 3500K, 4000K, or 5000K. Make your selection based on your lighting requirements.

Image: Product dimensions and location of wattage/CCT selection switches.

4.2. Įrenginio montavimas

The fixture is designed for surface mounting. Use the provided mounting clips and hardware.

1. Mark the desired mounting locations on the ceiling or wall. Ensure the marks are level and spaced appropriately for the fixture's length.
2. Drill pilot holes at the marked locations. Insert wall anchors if mounting into drywall or masonry.
3. Secure the mounting clips to the surface using the provided screws.
4. Snap the LED vapor tight fixture into the mounted clips, ensuring it is firmly seated.

Vaizdas: pvzample of surface mounting in a facility.

Image: Detail of the linkable design feature.

4.3. Elektros instaliacija

This fixture supports 0-10V dimming. Follow the wiring diagram below and local electrical codes.

• Prijunkite Juoda laidą nuo armatūros iki Linija (L) laidą iš maitinimo šaltinio.
• Prijunkite Baltas laidą nuo armatūros iki Neutralus (N) laidą iš maitinimo šaltinio.
• Prijunkite Žalia laidą nuo armatūros iki Žemė (GND) laidą iš maitinimo šaltinio.
• For 0-10V dimming: Connect the Violetinė laidą nuo armatūros iki Pritemdyti+ wire from the 0-10V dimmer. Connect the Rožinė/Pilka laidą nuo armatūros iki Pritemdyta wire from the 0-10V dimmer.
• Ensure all connections are secure using appropriate wire connectors.

Note: If 0-10V dimming is not used, cap the purple and pink/gray wires individually with wire nuts.

5. Naudojimo instrukcijos

1. Maitinimas: Once installation and wiring are complete, restore power to the circuit at the breaker or fuse box. The fixture should illuminate.
2. Pritemdymas: If connected to a compatible 0-10V dimmer, adjust the dimmer control to achieve the desired light output level.
3. Vattage and CCT Adjustment: Vattage and CCT are set via internal switches during installation. These are not typically adjusted during normal operation. If changes are needed, disconnect power before accessing the switches.

6. Priežiūra

The LEDONE Vapor Tight Light is designed for long-term, low-maintenance operation. Regular cleaning can help maintain optimal light output.

• Valymas: Prieš valydami atjunkite maitinimą. Naudokite minkštą, damp cloth with a mild, non-abrasive cleaner to wipe the exterior of the fixture. Do not use harsh chemicals or abrasive pads, as these can damage the finish or lens.
• Patikra: Periodically inspect the fixture and mounting hardware for any signs of damage, loose connections, or wear. Address any issues promptly.
• Nėra vartotojo aptarnaujamų dalių: The LED light source and driver are integrated components. Do not attempt to open or repair the fixture. Contact qualified personnel for any issues beyond basic cleaning and inspection.

Image: The IP65 waterproof rating ensures durability in wet conditions.

7. Problemų sprendimas

Before performing any troubleshooting, ensure power is disconnected at the circuit breaker.

8. Specifikacijos

Image: Key features and certifications of the LEDONE Vapor Tight Light.

9. Informacija apie garantiją

LEDONE products are manufactured to high quality standards. This product comes with a standard manufacturer's warranty. Please refer to the product packaging or the official LEDONE webKonkrečias garantijos sąlygas ir nuostatas rasite svetainėje. Išsaugokite pirkimo įrodymą, jei prireiktų pateikti garantinį prašymą.

10. Pagalba klientams

If you have any questions, require technical assistance, or need to report an issue, please contact LEDONE customer support:

• Websvetainė: Visit the LEDONE Store on Amazon (for general inquiries)
• El. paštas: Žiūrėkite produkto pakuotę arba oficialų website for direct support email.
• Telefonas: Žiūrėkite produkto pakuotę arba oficialų website for direct support phone number.

Please have your product model number (8FT LED Vapor Tight Light) and proof of purchase ready when contacting support.