1. Įvadas
The Sans HEPA 13 Air Purifier is designed to provide cleaner, healthier air in your home or workplace. It features advanced filtration technology to effectively remove airborne particles and improve indoor air quality.
Pagrindinės funkcijos:
- Platus aprėptis: Purifies air in spaces up to 1560 sq. ft. every hour.
- Pažangi filtravimo sistema: Equipped with a pre-filter, medical-grade HEPA 13 filter, activated carbon filter, and a powerful internal UV-C light.
- Visapusiška apsauga: Removes over 99.9% of particles down to 0.1 microns, including pollutants, allergens, dust, dander, harmful chemicals, gases, odors, and smoke.
- Tylus veikimas: Designed for ultra-quiet performance, especially in sleep mode.
- Smart Auto-Mode: Utilizes precise sensors to measure air quality and automatically adjusts fan settings for optimal purification and energy efficiency.
- Oro kokybės ekranas: Features an easy-to-read display showing the Air Quality Index (AQI) in real-time.
2. Sąranka
- Išpakuokite valytuvą: Atsargiai išimkite oro valytuvą iš pakuotės. Įsitikinkite, kad pašalintos visos pakavimo medžiagos.
- Padėties nustatymas: Place the air purifier on a flat, stable surface in the desired room. For optimal performance, ensure there is adequate space around the air intake and outlet vents.
- Filtro diegimas: The filter is typically pre-installed but may require removal of protective packaging. Refer to the 'Maintenance' section for detailed filter access instructions. Ensure the filter is correctly seated before closing the cover.
- Maitinimo jungtis: Prijunkite maitinimo laidą į standartinį elektros lizdą.
3. Naudojimo instrukcijos
The Sans HEPA 13 Air Purifier features an intuitive control panel located on the top of the unit.
- Maitinimo įjungimas/išjungimas: Paspauskite ĮJUNGTA/IŠJUNGTA mygtuką, kad įjungtumėte arba išjungtumėte įrenginį.
- Režimo pasirinkimas: Paspauskite REŽIMAS button to cycle through different operating modes: Auto, Low, Medium, High.
- Automatinis režimas: In Auto-Mode, the purifier uses precise sensors to detect real-time air quality and automatically adjusts the fan speed to maintain optimal air purification.
- Laikmačio funkcija: Naudokite LAIKMATIS button to set the operating duration (e.g., 2, 4, or 8 hours). The unit will automatically shut off after the set time.
- Šviesos valdymas: The ŠVIESA button controls the ambient light feature. Press to turn the light on or off.
- Miegojimo rezimas: When activated, Sleep Mode operates the purifier at its lowest, quietest setting and turns off all display lights to ensure an undisturbed sleeping environment.
- Oro kokybės indikatorius (AQI): The digital display shows the current Air Quality Index (AQI) in your space. A lower number indicates cleaner air. The color of the top light ring may also change to reflect air quality (e.g., blue for good, red for poor).
- UV-C šviesa: The internal UV-C light provides an additional layer of air purification. It can be toggled on or off via the control panel.
Oficialus produkto vaizdo įrašas:
4. Priežiūra
Regular maintenance ensures the longevity and optimal performance of your Sans HEPA 13 Air Purifier.
Filtro keitimas:
The air purifier is equipped with a filter replacement indicator that will illuminate when it's time to change the filter. It is generally recommended to replace the filter every 3 months, depending on usage and air quality.
- Išjungti: Prieš atlikdami bet kokią techninę priežiūrą, visada išjunkite ir atjunkite oro valytuvą nuo elektros tinklo.
- Prieigos filtro skyrius: Locate the filter access panel, typically on the back or bottom of the unit. Open the panel by pressing the release tab or rotating the base as indicated in the diagram.
- Pašalinti seną filtrą: Carefully pull out the used filter by its tabs. Dispose of the old filter responsibly.
- Įdiekite naują filtrą: Remove the new filter from its protective packaging. Insert the new filter into the compartment, ensuring it is seated correctly.
- Uždaryti skydelį: Tvirtai uždarykite filtro prieigos skydelį.
- Iš naujo nustatyti filtro indikatorių: After replacing the filter, press and hold the filter reset button (often combined with another function button) for a few seconds until the indicator light turns off.
Išorės valymas:
Oro valytuvo išorę nuvalykite minkštu, sausu skudurėliu. Nenaudokite abrazyvinių valiklių ar tirpiklių.
5. Problemų sprendimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Įrenginys neįsijungia | Nėra elektros; maitinimo laidas netinkamai prijungtas. | Įsitikinkite, kad maitinimo laidas yra tvirtai įjungtas į veikiantį lizdą. Patikrinkite maitinimo jungiklį. |
| Prastas oro valymo našumas | Clogged filter; incorrect mode setting. | Replace the filter if the indicator is on. Select a higher fan speed or Auto-Mode. |
| Neįprastas triukšmas | Ventiliatoriuje yra kliūtis; įrenginys nepastatytas ant stabilaus paviršiaus. | Turn off and unplug the unit. Check for any foreign objects. Place on a stable surface. |
| Air Quality Index (AQI) remains high | High level of pollutants; unit not running long enough. | Allow the unit to run longer, especially in Auto-Mode. Ensure proper room size coverage. |
6. Specifikacijos
- Modelio numeris: Sans Purificatore d'aria HEPA 13
- Gaminio matmenys: 10 "D x 11.5" P x 20" A
- Prekės svoris: 14 svaro
- Maitinimo šaltinis: Su laidu elektra
- Spalva: Vidurnaktis
- Filtro tipas: Pre-Filter, Medical Grade HEPA 13, Activated Carbon, UV-C Light
- Aprėpties sritis: Up to 1560 sq. ft. per hour
7. Garantija ir palaikymas
For warranty information and customer support, please refer to the product packaging or contact Sans customer service directly. Keep your purchase receipt for warranty claims.
