Allsmartlife 1x2 FT LED Flat Panel Light User Manual

1. Saugos informacija

Prieš montuodami ir naudodami atidžiai perskaitykite šias instrukcijas. Išsaugokite šį vadovą ateičiai.

• Elektros sauga: Always turn off power at the circuit breaker before installing, servicing, or cleaning the fixture. Ensure all electrical connections comply with local codes and ordinances. If you are unsure about wiring, consult a qualified electrician.
• Tvarkymas: Handle the LED panel light with care to avoid damage. Do not apply excessive force.
• Aplinka: This fixture is suitable for indoor use and can be used in wet environments. Ensure the installation location is structurally sound to support the fixture's weight.
• Vėdinimas: Užtikrinkite tinkamą vėdinimą aplink įrenginį, kad jis neperkaistų.

2. Pakuotės turinys

Prieš pradėdami diegti, patikrinkite, ar yra visi komponentai:

• Allsmartlife 1x2 FT LED Flat Panel Light (2 units)
• Montavimo laikiklis (-iai)
• Installation Hardware (screws, drywall anchors, wire caps)
• Safety Rope(s)
• Vartotojo vadovas

Vaizdas: Viršview of the LED panel light and included mounting hardware.

3. Produkto ypatybės

• Super ryškus: 24W, 2880 Lumens, with 240 LED lamp karoliukai stabiliam ir ryškiam apšvietimui.
• Selectable 5CCT: Easily adjust color temperature between 3000K (Warm White), 3800K (Neutral White), 4500K (Bright White), 5200K (Daylight White), and 6000K (Cool White) using a switch on the fixture.
• Smooth Dimmable: Compatible with Triac dimmers for 10-100% smooth dimming at standard 120V.
• Didelis našumas: Energy-efficient LED technology saves up to 85% on electricity compared to traditional lighting.
• Itin plonas dizainas: With a thickness of only 0.98 inches, the edge-lit panel fits closely to the ceiling for a sleek appearance.
• Patvari konstrukcija: Features a strong and durable aluminum housing with high heat dissipation. Sealed design prevents insects from entering and allows for use in wet environments.

Image: Visual representation of the 5 selectable color temperatures and the switch for adjustment.

Image: Illustration of the smooth dimming capability from 10% to 100%.

4. Specifikacijos

5. Montavimo instrukcijos

The Allsmartlife 1x2 FT LED Flat Panel Light supports three types of installation: Surface Mount, Drop Mount, and Recessed Mount. Always ensure power is OFF at the circuit breaker before starting installation.

Vaizdas: Viršview of the three available installation methods.

5.1. Montavimas ant paviršiaus

1. Prepare the Mounting Frame: The light fixture comes with a mounting frame attached. Carefully detach the frame from the light panel by cutting any zip ties or releasing klipai.
2. Rėmo montavimas: Position the mounting frame on the ceiling where the fixture will be installed. Mark the screw holes. Use an electric drill to create pilot holes and secure the frame to the ceiling using the provided screws and drywall anchors (if necessary).
3. Prijunkite laidus: Pull the electrical wires from the ceiling junction box through the center opening of the mounting frame. Connect the live (black), neutral (white), and ground (green/bare copper) wires from the ceiling to the corresponding wires on the LED driver using the provided wire caps.
4. Pritvirtinkite apsauginį lyną: Connect the safety rope from the light panel to the hooks on the mounting plate to prevent accidental drops during final installation.
5. Secure Light Panel: Carefully slide the LED panel light onto the mounting frame, ensuring it locks securely into place.
6. Testas: Atkurkite elektros srovę automatiniu jungikliu ir patikrinkite šviestuvą.

Image: Detailed steps for surface mount installation.

5.2. Drop Mount Installation

A suspension kit is required for drop mount installation (not included in the standard package). Ensure the ceiling can support the suspended weight.

1. Install Suspension Cables: Drill holes in the ceiling at appropriate spacing (e.g., 36-37 inches apart for a 1x4FT light, adjust for 1x2FT). Install the base of the suspension cables into the ceiling.
2. Thread Cables: Thread the lanyard (suspension wire) into the nut and stretch the rope. Adjust the length of the lanyard as desired.
3. Prijunkite laidus: Connect the electrical wires from the ceiling to the LED driver as described in the Surface Mount section.
4. Attach Light Panel: Pass the suspension ropes through the hooks on the light fixture. Secure the light panel to the suspension cables, ensuring it hangs level.
5. Testas: Restore power and test the light fixture.

Image: Detailed steps for suspension mount installation.

5.3. Įleidžiamo laikiklio montavimas

This method is suitable for ceilings with existing openings or grid systems.

1. Paruoškite lubas: Turn off power. Remove the existing ceiling tile or prepare the opening for the fixture.
2. Prijunkite laidus: Connect the power cord from the ceiling to the LED driver.
3. Įdėkite tvirtinimą: Tilt the light panel and insert it through the ceiling gap. Carefully position it within the grid or opening.
4. Saugus tvirtinimas: Ensure the fixture is securely seated within the ceiling grid.
5. Testas: Restore power and test the light fixture.

Image: Detailed steps for recessed mount installation.

5.4. Diegimo vaizdo įrašai

6. Naudojimo instrukcijos

6.1. Spalvos temperatūros pasirinkimas (5CCT)

The LED panel light features a selectable color temperature switch located on the side of the fixture. Before or after installation, you can use this switch to choose your preferred light color:

• 3000K: Šilta Balta
• 3800K: Neutralus baltas
• 4500K: Ryškiai Balta
• 5200K: Dienos šviesa Balta
• 6000K: Šalta Balta

Simply slide the switch to the desired setting. The change will be immediate.

Image: The LED panel light installed in a kitchen, showcasing various color temperature options.

6.2. Pritemdymo funkcija

This fixture is compatible with Triac dimmers (not included). To utilize the dimming feature, ensure you have a compatible dimmer switch installed in your electrical circuit. The light can be smoothly dimmed from 10% to 100% brightness.

7. Priežiūra

• Valymas: Ensure the power is off before cleaning. Use a soft, damp cloth to wipe the surface of the fixture. Avoid abrasive cleaners or solvents that may damage the finish.
• Lemputės keitimas nereikalingas: This LED fixture does not require bulb replacement. The integrated LEDs are designed for a long lifespan of 50,000 hours.
• Patikra: Reguliariai tikrinkite šviestuvą, ar nėra kokių nors pažeidimų ar atsilaisvinusių jungčių. Jei aptinkama problemų, išjunkite maitinimą ir kreipkitės į kvalifikuotą elektriką.

8. Problemų sprendimas

9. Garantija ir palaikymas

Allsmartlife products are designed for quality and reliability. For warranty information, technical support, or any product-related inquiries, please contact Allsmartlife customer service.

• Klientų aptarnavimo el. paštas: cs@allsmartlife.com
• Atsakymo laikas: Allsmartlife aims to respond to inquiries within 12 hours.