„Intel NUC 13 Pro NUC13ANHi3 Barebone“ sistemos naudotojo vadovas

Įvadas

This manual provides essential instructions for the setup, operation, and maintenance of your Intel NUC 13 Pro NUC13ANHi3 Barebone System. Please read this manual thoroughly before using the product to ensure proper functionality and to prevent damage. The Intel NUC kit features a customizable board and chassis that are ready to accept a wide variety of memory, storage, and operating systems.

Priekyje view of the Intel NUC 13 Pro NUC13ANHi3 Barebone System, showing USB ports, headphone jack, and power button.

Pakuotės turinys

Patikrinkite, ar pakuotėje yra visi reikalingi daiktai:

• Intel NUC 13 Pro Kit NUC13ANHi3
• Maitinimo adapteris
• JAV maitinimo laidas

Sąranka

1. Atminties (RAM) diegimas

The NUC 13 Pro NUC13ANHi3 supports DDR4 SDRAM.

1. Unscrew the bottom cover of the NUC.
2. Locate the DDR4 SDRAM compatible slots.
3. Gently insert the memory modules into the slots until they click into place.
4. Uždėkite apatinį dangtelį.

2. Installing Storage (HDD/SSD)

The system supports Serial ATA interface for storage.

1. With the bottom cover removed, locate the storage bay.
2. Connect your HDD or SSD to the Serial ATA connector.
3. Secure the drive within the bay using the provided screws (if applicable).
4. Uždėkite apatinį dangtelį.

3. Išorinių įrenginių prijungimas

Prijunkite monitorių, klaviatūrą, pelę ir kitus periferinius įrenginius.

Galinis view of the Intel NUC 13 Pro NUC13ANHi3, illustrating the power input, HDMI ports, Ethernet port, and USB ports.

• Ekranas: Connect your monitor(s) to the HDMI ports.
• USB įrenginiai: The system supports up to 7 USB peripherals, including 2 USB 2.0 ports. Connect your keyboard, mouse, and other USB devices to the available USB ports.
• Tinklas: For wired network connectivity, connect an Ethernet cable to the 2.5 Gigabit Ethernet port.
• Galia: Prijunkite maitinimo adapterį prie NUC, o tada – prie maitinimo lizdo.

Operacinės sistemos diegimas

The Intel NUC 13 Pro NUC13ANHi3 is a barebone system, requiring the user to install an operating system. Supported operating systems include Red Hat Linux, Ubuntu Linux, Windows 10, Windows 11 Home, and Windows 11 Pro.

1. Prepare a bootable USB drive with your chosen operating system installer.
2. Insert the USB drive into an available USB port on the NUC.
3. Power on the NUC and enter the BIOS/UEFI setup (usually by pressing F2 or Delete during startup).
4. Konfigūruokite įkrovos tvarką, kad būtų suteiktas prioritetas USB diskui.
5. Save changes and exit BIOS/UEFI. The system will boot from the USB drive, allowing you to proceed with the OS installation.

Operacija

Maitinimo įjungimas/išjungimas

• Norėdami įjungti: Paspauskite maitinimo mygtuką, esantį priekiniame skydelyje.
• Norėdami išjungti: Naudokite operacinės sistemos išjungimo funkciją. Arba paspauskite ir 4 sekundes palaikykite nuspaudę maitinimo mygtuką, kad priverstinai išjungtumėte sistemą (naudokite tik prireikus).

BIOS / UEFI prieiga

Norėdami pasiekti BIOS / UEFI nustatymus, įjunkite NUC ir pakartotinai paspauskite F2 raktas (arba Ištrinti key on some models) during the initial boot sequence.

Priežiūra

Valymas

• Prieš valydami įsitikinkite, kad prietaisas yra išjungtas ir atjungtas.
• Use a soft, dry cloth to wipe the exterior of the NUC.
• For dust accumulation in vents, use compressed air. Do not spray liquids directly onto the device.

Programinės įrangos atnaujinimai

Reguliariai atnaujinkite operacinę sistemą, tvarkykles ir BIOS / UEFI programinę-aparatinę įrangą, kad užtikrintumėte optimalų našumą ir saugumą. Apsilankykite oficialioje „Intel“ palaikymo svetainėje. website for the latest updates specific to the NUC13ANHi3 model.

Trikčių šalinimas

• Nėra galios:

  Ensure the power adapter is securely connected to both the NUC and a working power outlet. Verify the power cord is properly seated in the adapter.
• Nėra ekrano:

  Check that the monitor is powered on and correctly connected to the NUC's HDMI port. Try a different HDMI cable or monitor if available. Ensure RAM modules are properly seated.

• Operacinė sistema nepaleidžiama:

  Verify that the storage drive (HDD/SSD) is correctly installed and detected in BIOS/UEFI. Check the boot order in BIOS/UEFI to ensure the correct drive is prioritized. Reinstall the operating system if necessary.

• Periferinis įrenginys neaptiktas:

  Try connecting the peripheral to a different USB port. Ensure necessary drivers are installed for the peripheral within your operating system.

Specifikacijos

Garantija ir palaikymas

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Intel support websvetainę.

Palaikymas internetu: „Intel NUC“ palaikymas