„Wilo Star S33 FC“ cirkuliacinio siurblio naudotojo vadovas

1. Produktas baigtasview

The Wilo Star S 33 FC 230V/60Hz circulator pump is engineered for efficient fluid circulation in various heating systems. It features a robust cast iron housing and a three-speed motor, providing versatility for different application requirements.

This model is designed for quiet operation due to its wet rotor design, making it suitable for sound-sensitive installations. It includes a built-in, removable check valve for enhanced system control.

Pagrindinės funkcijos:

• Cast iron housing with fixed flanges.
• Three-speed motor (Low/Medium/High) with a maximum head of 33 feet.
• Integrated, removable check valve.
• Suitable for radiant heating, hydronic heating, fan coil heating, and solar systems.
• Whisper-quiet operation.
• Includes two gaskets (O-rings).
• Atitinka UL/CSA reikalavimus dėl saugos ir atitikties.

1 pav.: priekis view of the Wilo Star S33 FC Circulating Pump, showing the control panel and specifications label.

2. Saugos informacija

Prieš montuodami ir naudodami atidžiai perskaitykite visas instrukcijas. Nesilaikant šių instrukcijų, gali kilti elektros smūgis, gaisras arba sunkūs sužalojimai.

• Elektros sauga: Ensure power is disconnected before any installation, maintenance, or repair work. All electrical connections must be performed by a qualified electrician in accordance with local codes and regulations.
• Vandens temperatūra: The pump is designed for a maximum water temperature of 230°F (110°C). Do not exceed this temperature.
• Slėgis: The maximum working pressure is 140 PSI. Do not exceed this pressure.
• Diegimo aplinka: Install the pump in a dry, well-ventilated area. Protect from freezing temperatures.
• Skysčių suderinamumas: This pump is suitable for water and glycol mixtures. Do not use with flammable or corrosive liquids.
• Nepanardinamas: This pump is not submersible. Do not immerse in water.
• Do Not Run Dry: Operating the pump without fluid can cause severe damage. Ensure the system is properly filled and purged of air before starting the pump.

3. Sąranka ir diegimas

3.1 Patikrinimai prieš montavimą

• Patikrinkite, ar siurblio tūristage (230V) matches the supply voltage.
• Ensure the installation location provides adequate space for maintenance and ventilation.
• Confirm that all necessary plumbing fittings and electrical components are available.

3.2 Siurblio montavimas

1. Position the pump in the system piping, ensuring the flow direction matches the arrow on the pump housing.
2. Use appropriate pipe wrenches to secure the pump flanges to the system piping. Do not overtighten.
3. Ensure the pump is installed horizontally with the motor shaft level to prevent air pockets and ensure proper lubrication.

3.3 Elektros prijungimas

ĮSPĖJIMAS: Electrical connections must be made by a qualified electrician. Disconnect power before proceeding.

1. Open the electrical terminal box on the pump.
2. Connect the 230V/60Hz power supply wires to the designated terminals (L1, L2, Ground) according to the wiring diagram inside the terminal box cover.
3. Įsitikinkite, kad visos jungtys yra saugios ir tinkamai izoliuotos.
4. Close the terminal box cover securely to protect against moisture and dust.

2 pav.: šonas view of the Wilo Star S33 FC Circulating Pump, highlighting the electrical connection box and removable check valve.

4. Naudojimo instrukcijos

4.1 System Filling and Purging

Before starting the pump, ensure the heating system is completely filled with fluid and all air has been purged. Running the pump dry will cause damage.

4.2 Siurblio paleidimas

1. Once the system is filled and purged, restore power to the pump.
2. The pump will begin operating at the selected speed setting.

4.3 Greičio pasirinkimas

The Wilo Star S33 FC features a three-speed motor. The speed can be adjusted using the selector switch on the pump's motor housing:

• 1 nustatymas (žemas): For systems requiring minimal flow or for quietest operation.
• 2 nustatymas (vidutinis): A balanced setting for general applications.
• 3 nustatymas (aukštas): For systems requiring maximum flow and head pressure.

Select the speed setting that best matches your system's requirements to optimize performance and energy consumption.

5. Priežiūra

The Wilo Star S33 FC pump is designed for minimal maintenance. However, regular checks can ensure optimal performance and longevity.

• Kasmetinė apžiūra: Annually inspect the pump for any signs of leaks, unusual noises, or vibrations.
• Sistemos skysčio kokybė: Ensure the system fluid is clean and free of debris. Poor fluid quality can lead to premature wear.
• Patikrink vožtuvą: The built-in check valve is removable for inspection or cleaning if necessary. Ensure power is off and the system is drained before attempting to remove it.
• Variklio aušinimas: Ensure the motor is not obstructed and has adequate ventilation for cooling.

For any complex maintenance or repairs, it is recommended to contact a qualified service technician.

6. Problemų sprendimas

If the problem persists after attempting these solutions, please contact Wilo customer support or a qualified service professional.

7. Specifikacijos

8. Garantija ir palaikymas

For detailed warranty information and technical support, please refer to the official Wilo website or contact Wilo customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

Wilo Contact Information:

• Websvetainė: www.wilo.com (Please check for regional specific websvetainės)
• Klientų aptarnavimas: Žr websvetainė, kurioje pateikiami kontaktiniai numeriai ir el. pašto palaikymas.