OWON CM2100 Digital AC/DC Clamp Skaitiklio naudojimo instrukcija

Įvadas

This manual provides essential information for the safe and effective operation of your OWON CM2100 Digital AC/DC Clamp Meter. Please read this manual thoroughly before use and retain it for future reference. The CM2100 is a portable, true RMS clamp meter designed for measuring AC/DC current, AC/DC voltage, resistance, capacitance, diode, and non-contact voltage (NCV).

Saugos informacija

ĮSPĖJIMAS: Kad išvengtumėte elektros smūgio ar sužalojimų, prieš naudodami šį gaminį, perskaitykite ir supraskite visą saugos informaciją.

• Visada laikykitės vietinių ir nacionalinių saugos taisyklių.
• Nenaudokite matuoklio, jei jis atrodo pažeistas arba jei izoliacija yra pažeista.
• Netepkite daugiau nei vardinis tūristage, kaip pažymėta ant skaitiklio, tarp gnybtų arba tarp bet kurio gnybto ir įžeminimo.
• Būkite atsargūs dirbdami su voltagesant didesnei nei 30 V AC RMS, 42 V pikinei vertei arba 60 V DC įtampai. Šie įtampų lygiaitagtai kelia šoko pavojų.
• Prieš atidarydami baterijų dangtelį, atjunkite bandymo laidus nuo matuoklio.
• Įsitikinkite, kad funkcijų jungiklis yra teisingoje padėtyje, kad būtų atliekamas matavimas.
• Nenaudokite matuoklio šalia sprogių dujų, garų ar dulkių.
• Always use appropriate personal protective equipment (PPE).

Produktas baigtasview ir komponentai

Familiarize yourself with the various parts of your CM2100 clamp meter before operation.

Vaizdas: Detailed diagram of the OWON CM2100 clamp meter, highlighting its key components such as the NCV sensor, pincher head trigger, function selection knob, DCA reset/BLE button, function selector, NCV light, LCD display, numerical lock/backlight switch, capacity/resistance/voltage/frequency/diode/ON-OFF input jack, and common-end jack. Dimensions are also indicated.

• NCV jutiklis: Aptinka bekontakčius tūrio matavimustage.
• Žnyplės galvutės gaidukas: Atidaro ir uždaro klamp žandikauliai.
• Funkcijos pasirinkimo rankenėlė: Rotates to select different measurement modes (e.g., V~, V=, A~, A=, Ω, NCV, VFC, Hz%).
• DCA atstatymo / BLE mygtukas: Used for DC current zeroing and Bluetooth (BLE) activation on compatible models (CM2100B).
• Funkcijų parinkiklis: Toggles between specific functions within a mode (e.g., AC/DC voltage, resistance/capacitance).
• NCV šviesa: Illuminates to indicate non-contact voltage aptikimas.
• LCD ekranas: Rodo matavimo rodmenis, vienetus ir indikatorius.
• Numerical Lock/Backlight Switch: Locks the current reading (HOLD) and activates the display backlight.
• Įvesties lizdai: Tūrio matavimo laidų prijungimuitage, varžos, talpos, diodo ir tęstinumo matavimai.
• Common-End Jack: The negative (-) input for test leads.

Kas yra dėžutėje

Atidarę pakuotę, patikrinkite, ar yra visi žemiau išvardyti daiktai ir ar jie nepažeisti.

Vaizdas: Contents of the OWON CM2100 package, including the CM2100 clamp meter, a pair of multimeter test leads (red and black), a small bolt driver, a quick guide, and a soft carrying bag.

1. OWON CM2100 Clamp Metras
2. Multimetro bandymo laidai (raudoni ir juodi)
3. Bolt Driver (for battery compartment)
4. Trumpas vadovas
5. Minkštas nešiojimo krepšys

Sąranka

Akumuliatoriaus montavimas

1. Įsitikinkite, kad skaitiklis yra IŠJUNGTAS.
2. Raskite baterijų skyrių matuoklio gale.
3. Use the provided bolt driver to loosen the screw securing the battery cover.
4. Nuimkite akumuliatoriaus dangtelį.
5. Insert the Lithium Metal battery (included) according to the polarity markings inside the compartment.
6. Uždėkite akumuliatoriaus dangtelį ir priveržkite varžtą.

Pradinis įjungimas

Rotate the function selection knob from OFF to any measurement function to power on the meter. The LCD display will illuminate.

Naudojimo instrukcijos

Funkcijos pasirinkimas

Rotate the central knob to select the desired measurement function. The meter features an automatic range for most measurements, simplifying operation.

Vaizdas: Baigėsiview of the OWON CM2100's multiple measurement functions, including Resistance (Ω), NCV, VFC, HOLD, ON/OFF (continuity), LCD, Capacitance, Diode, Overload Protection, Low Battery Alert, Buzzing Prompt, and True RMS. It also highlights the 20000 counts, auto range, AC/DC voltage, and AC/DC current measurement capabilities.

Matavimo režimai

• AC/DC Current Measurement (A~ / A=):

  Rotate the knob to the 'A~' or 'A=' position. Press the trigger to open the clamp jaws and enclose a single conductor. Ensure the conductor is centered within the jaws for accurate readings. The display will show the current value. For DC current, press the DCA Reset button to zero the reading before measurement.

• AC/DC ttage Measurement (V~ / V=):

  Insert the red test lead into the VΩHz input jack and the black test lead into the COM jack. Rotate the knob to 'V~' for AC voltage arba „V=“, jei tai nuolatinės srovės tūristage. Connect the test leads in parallel to the circuit or component to be measured. The display will show the voltage vertė.
• Varžos matavimas (Ω):

  Insert test leads as for voltage. Rotate the knob to the 'Ω' position. Connect the test leads across the component. The display will show the resistance value in Ohms (Ω).

• Talpos matavimas:

  Insert test leads as for voltage. Rotate the knob to the 'Ω' position and use the Function Selector button to cycle to capacitance mode (usually indicated by 'nF', 'µF'). Connect the test leads across the capacitor. The display will show the capacitance value.

• Diodo testas:

  Insert test leads as for voltage. Rotate the knob to the 'Ω' position and use the Function Selector button to cycle to diode test mode (indicated by a diode symbol). Connect the red lead to the anode and the black lead to the cathode of the diode. The display will show the forward voltage lašas.
• Tęstinumo testas:

  Insert test leads as for voltage. Rotate the knob to the 'Ω' position and use the Function Selector button to cycle to continuity mode (indicated by a buzzer symbol). If the resistance is below a certain threshold, the buzzer will sound, indicating continuity.

• Nekontaktinis ttage (NCV) aptikimas:

  Rotate the knob to the 'NCV' position. Bring the NCV sensor (top part of the clamp meter) close to an AC voltage source. The NCV light will illuminate, and an audible beep will sound, with increasing frequency as the meter gets closer to the voltage šaltinis.

• VFC (Variable Frequency Drive) Measurement:

  Rotate the knob to the 'VFC' position. This mode is designed for measuring AC voltage and frequency of variable frequency drives, providing more stable readings in such environments.
• Frequency (Hz%) Measurement:

  Rotate the knob to the 'Hz%' position. This mode measures the frequency of AC signals. Connect test leads as for voltage measurement. The display will show the frequency in Hertz (Hz).

Papildomos funkcijos

• LAIKYMO funkcija: Press the HOLD button (often combined with backlight) to freeze the current reading on the display. Press again to release.
• Foninis apšvietimas: Press and hold the HOLD/Backlight button to activate the display backlight for better visibility in low-light conditions. Press and hold again to turn off.
• Tikrasis RMS: The CM2100 is a True RMS meter, meaning it accurately measures AC voltage and current for both sinusoidal and non-sinusoidal waveforms.
• Bluetooth Communication (CM2100B model only): If you have the CM2100B model, activate Bluetooth by pressing the BLE button. This allows remote data viewing and instrument control via a compatible smartphone application.

Vaizdas: Examples of the OWON CM2100 clamp meter in use, demonstrating capacitance measurement for maintenance, NCV (Non-Contact Voltage) inductive measurement, circuit board resistance measurement, and diode measurement.

Priežiūra

Valymas

Nuvalykite skaitiklį reklamaamp šluoste ir švelniu plovikliu. Nenaudokite abrazyvinių medžiagų ar tirpiklių. Saugokite įvesties gnybtus nuo purvo ir drėgmės.

Baterijos keitimas

When the low battery indicator appears on the display, replace the battery promptly to ensure accurate measurements. Refer to the "Battery Installation" section under Setup for instructions.

Sandėliavimas

If the meter is not used for an extended period, remove the battery to prevent leakage. Store the meter in a cool, dry place, away from direct sunlight and extreme temperatures.

Trikčių šalinimas

Specifikacijos

Garantija ir palaikymas

OWON products are designed for reliability and performance. For warranty information or technical support, please refer to the official OWON websvetainėje arba susisiekite su vietiniu platintoju. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą garantijos pretenzijoms.

Dėl papildomos pagalbos galite apsilankyti OWON parduotuvė „Amazon“ platformoje.