Reznor UDXC-150

Reznor UDXC-150 Natural Gas Unit Heater: Installation and Operation Manual

Modelis: UDXC-150 | Gamintojas: Reznor

1. Įvadas

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Reznor UDXC-150 Natural Gas Unit Heater. Please read all instructions carefully before attempting to install or operate the unit. Retain this manual for future reference.

Priekyje view „Reznor UDXC-150“ gamtinių dujų šildytuvo.

1 pav.: priekis view of the Reznor UDXC-150 Natural Gas Unit Heater. This image displays the front and side view of the Reznor UDXC-150 Natural Gas Unit Heater, showcasing its compact design and air outlet.

2. Saugos informacija

ĮSPĖJIMAS: Netinkamas montavimas, reguliavimas, keitimas, aptarnavimas ar techninė priežiūra gali sukelti žalą turtui, susižalojimą arba mirtį. Prieš montuodami arba atlikdami techninę priežiūrą, atidžiai perskaitykite montavimo, naudojimo ir priežiūros instrukcijas.

  • Ensure all local codes and ordinances are followed during installation.
  • Montavimą ir aptarnavimą turi atlikti kvalifikuotas montuotojas, aptarnavimo agentūra arba dujų tiekėjas.
  • Nelaikykite ir nenaudokite benzino ar kitų degių garų ir skysčių šalia šio ar kito prietaiso.
  • Šis įrenginys skirtas naudoti tik patalpose.

3. Sąranka ir diegimas

The Reznor UDXC-150 unit heater is designed for versatile installation in commercial or industrial spaces. Proper setup is crucial for safe and efficient operation.

3.1 Montavimas

The UDXC-150 is equipped with threaded-nut retainers at four suspension points, allowing for ceiling or wall mounting. Mounting brackets and hardware are sold separately and must be appropriate for the unit's weight and the structural integrity of the mounting surface.

Reznor UDXC-150 Unit Heater mounted on a ceiling, with a list of standard features.

Figure 2: Ceiling-mounted Reznor UDXC-150 Unit Heater. The heater is shown installed on a ceiling, illustrating its suspension points. Accompanying text lists features such as Status-Indicating LED Light, 7-Segment Display Board for troubleshooting, 2- and 4-Point Suspension Options, External Gas Connection, and ETL Approval.

3.2 Vėdinimas

This unit is compatible with category 1 double wall B-vent pipe. Venting can be configured vertically out of a roof or horizontally through a sidewall. Consult local codes for specific venting requirements.

3.3 Dujų prijungimas

An external gas connection point is provided for ease of maintenance and installation. Ensure all gas connections are leak-free and comply with local regulations. This unit operates on Natural Gas.

3.4 Elektros laidai

The unit features an external terminal strip for 24V wiring. All electrical work must be performed by a qualified electrician and adhere to all applicable electrical codes.

Image showing a worker installing a Reznor unit heater, with text about compact and durable heating.

Figure 3: Installation of the Reznor UDXC-150 Heater. A worker is shown connecting ductwork to a ceiling-mounted heater. The text emphasizes the unit's suitability for commercial/industrial spaces, corrosion-resistant materials, and quiet, efficient heating.

4. Naudojimo instrukcijos

The Reznor UDXC-150 is designed for efficient and quiet heating.

4.1 Pirmasis paleidimas

  1. Įsitikinkite, kad visos dujų ir elektros jungtys yra saugios ir patikrintos specialisto.
  2. Įjunkite dujų tiekimą į įrenginį.
  3. Atkurkite įrenginio elektros maitinimą.
  4. Set the thermostat to the desired temperature. The unit will initiate its ignition sequence.

4.2 Normalus veikimas

  • The unit features a single-burner design with two BTU outputs, allowing for efficient heating in varying conditions.
  • An integrated circuit board with a display and a status-indicating LED provides operational feedback.
  • The low static pressure axial fan and power venting system ensure effective air circulation and minimize heat loss.
  • The unit operates with low noise due to vibration-isolated fan and venter motors.
Graphic detailing standard features of the Reznor UDXC-150 Unit Heater.

Figure 4: Key Features of the Reznor UDXC-150 Unit Heater. This graphic highlights key features including 83% AFUE Efficiency, TCORE2 Titanium-Stabilized Aluminized Steel Heat Exchanger, Multi-Try Direct Spark Ignition, and Low Noise Operation.

5. Priežiūra

Regular maintenance ensures the longevity and optimal performance of your Reznor UDXC-150 unit heater. All maintenance should be performed by qualified personnel.

5.1 Įprastiniai patikrinimai (kas mėnesį / kas ketvirtį)

  • Inspect the heat exchanger for any signs of corrosion or damage. The TCORE2 titanium-stabilized aluminized steel heat exchanger is designed for durability.
  • Check the fan and motor for unusual noises or vibrations.
  • Įsitikinkite, kad oro įsiurbimo ir išmetimo angos nėra užblokuotos.
  • Verify that the external gas connection is secure and free of leaks.

5.2 Metinė priežiūra

  • A qualified technician should perform a comprehensive inspection and cleaning of the burner, heat exchanger, and ignition system.
  • The updated cabinet structure with a removable front face and hinged access door panel with a quarter-turn latch facilitate easier access for servicing.
  • Check and calibrate gas pressure as needed.
  • Inspect all electrical connections and wiring.

6. Problemų sprendimas

The UDXC-150 unit heater includes features to assist with troubleshooting common issues.

ProblemaGalima priežastisSprendimas
Heater does not igniteNo gas supply, electrical issue, ignition faultCheck gas valve, power supply. Consult 7-segment display for error codes.
Unit runs but no heatGas supply interrupted, burner issueVerify gas flow. Check burner for obstructions.
Neįprasti garsai veikimo metuFan imbalance, motor issue, loose componentsInspect fan and motor. Tighten any loose parts. If persistent, contact service.
Status LED indicates an errorSpecific fault detected by the control boardRefer to the 7-segment display board for specific error codes and consult the full service manual for detailed troubleshooting steps.

For complex issues or if the problem persists, contact a qualified service technician.

7. Specifikacijos

FunkcijaDetalė
Modelio numerisUDXC-150
Šilumos išėjimas150,000 britų terminių vienetų (BTU)
Kuro tipasGamtinės dujos
Šiluminis efektyvumas83 %
Gaminio matmenys (D x P x A)48.44" x 38.19" x 20.13"
Montavimo tipasCeiling Mount, Wall Mount (brackets sold separately)
Kambario tipasGarage, Warehouse, Commercial/Industrial Spaces
Ypatingos savybėsEnergy Efficient, Fast Heating, Low Noise Operation, TCORE2 Titanium-Stabilized Aluminized Steel Heat Exchanger, 7-Segment Display Board
Greičių skaičius2
Diagram showing the dimensions of the Reznor UDXC-150 Unit Heater.

Figure 5: Dimensions of the Reznor UDXC-150 Unit Heater. This image provides the physical dimensions of the 150,000 BTU unit, including its width, depth, and height, essential for installation planning.

8. Produktų vaizdo įrašai

Pateiktuose duomenyse nerasta jokių oficialių pardavėjo produktų vaizdo įrašų, kuriuos būtų galima įterpti į šį vadovą.

9. Informacija apie garantiją

Specific warranty details for the Reznor UDXC-150 unit heater are typically provided at the point of purchase or included with the product packaging. Please refer to the warranty card or contact the seller (1HVAC) or Reznor directly for comprehensive warranty terms and conditions.

10. Pagalba ir kontaktai

For technical assistance, parts, or service inquiries, please contact the seller or an authorized Reznor service provider. Ensure you have your model number (UDXC-150) and serial number available when contacting support.

Seller: 1HVAC

Dėl papildomos informacijos galite apsilankyti 1HVAC parduotuvė „Amazon“ svetainėje.

Two Reznor unit heaters, one with a fan visible, and text about product condition and packaging.

Figure 6: Product Condition and Packaging. This image shows two unit heaters, one from the front and one from the side revealing the fan. Text describes the careful handling in the 1HVAC warehouse and expert packaging to ensure product integrity during transit.

Susiję dokumentai - UDXC-150

Preview „Reznor“ dujų konversijos rinkinio montavimas dujiniams šildytuvams
Šiame dokumente pateikiamos „Reznor“ dujų konvertavimo rinkinių, skirtų įvairiems dujinių šildytuvų modeliams, įskaitant UBX, UBXC, UBZ, UDX, UDXC, UDZ, UDAP, UDAS, UDBP ir UDBS, montavimo instrukcijos. Jame išsamiai aprašomas komponentų pasirinkimas, saugos priemonės ir montavimo veiksmai, skirti konvertuoti tarp gamtinių dujų ir propano, taip pat montuojant dideliame aukštyje.
Preview „Reznor“ lubų pakabinimo komplekto montavimo vadovas elektriniams ir dujiniams šildytuvams
„Reznor CK22“ lubų pakabinimo komplekto, suderinamo su EHU elektriniais ir UDXC, UDX, UDZ dujiniais šildytuvais, montavimo instrukcijos ir komponentų informacija. Sužinokite, kaip saugiai sumontuoti „Reznor“ šildytuvą.
Preview „Reznor“ relių rinkinio, skirto kelių įrenginių valdymui (CL31/CL32), montavimo vadovas
Išsamus „Reznor CL31“ ir „CL32“ relių rinkinių montavimo vadovas, leidžiantis valdyti kelis įvairių „Reznor“ elektrinių ir dujinių šildytuvų įrenginius. Apima komponentų sąrašus, išsamius montavimo veiksmus ir laidų specifikacijas.
Preview „Reznor“ vertikalių žaliuzių komplekto dujiniams šildytuvams (OPT-CD1) montavimo vadovas
„Reznor OPT-CD1“ vertikalių žaliuzių komplekto, skirto dujiniams šildytuvams (UBX, UBXC, UBZ, UDX, UDXC, UDZ, UEZ modeliai), montavimo instrukcijos. Į komplektą įeina komponentų sąrašas ir nuoseklus surinkimo vadovas.
Preview „Reznor UBXC/UDXC“ dujinio šildytuvo keitimo dalių vadovas
Šiame vadove pateikiama išsami informacija apie „Reznor UBXC“ ir „UDXC“ serijos dujinių šildytuvų atsargines dalis. Jame yra skyriai apie serijos numerio dekodavimą, elektros komponentus, ventiliatorių ir variklių mazgus, pūstuvų mazgus, spintelių komponentus, šilumokaičio ir degiklio mazgus, ventiliatoriaus ir dūmtraukio apvalkalo komponentus bei įvairius priedus ir parinktis.
Preview „Reznor“ šilumokaičio tarpiklių komplekto montavimo vadovas dujiniams šildytuvams
Išsamios „Reznor“ šilumokaičio tarpiklių rinkinių, skirtų UBX, UBXC, UBZ, UDX, UDXC ir UDZ dujiniams šildytuvams, montavimo instrukcijos. Pateikiami rinkinio komponentai, dydžiai ir nuoseklios montavimo procedūros.