„Mr. Coffee“ 4 šotų garinio espreso, kapučino ir latės kavos aparato (modelis: BVMC-ECM271) naudojimo instrukcija

Įvadas

This manual provides detailed instructions for the safe and efficient operation, maintenance, and troubleshooting of your Mr. Coffee 4-Shot Steam Espresso, Cappuccino, and Latte Maker, model BVMC-ECM271. Please read all instructions carefully before first use and retain this manual for future reference.

Vaizdas: priekis view of the Mr. Coffee 4-Shot Steam Espresso, Cappuccino, and Latte Maker. The machine is black with a stainless steel front panel, featuring a portafilter, steam wand, and glass carafe.

Svarbi saugos informacija

Naudodami elektros prietaisus, visada laikykitės pagrindinių saugos priemonių, kad sumažintumėte gaisro, elektros smūgio ir (arba) asmenų sužalojimo riziką.

• Perskaitykite visas instrukcijas.
• Nelieskite karštų paviršių. Naudokite rankenas arba rankenėles.
• Kad apsisaugotumėte nuo elektros smūgio, nemerkite laido, kištukų ar prietaiso į vandenį ar kitą skystį.
• Atidžiai prižiūrėti būtina, kai bet kurį prietaisą naudoja vaikai arba jį naudoja šalia vaikų.
• Ištraukite kištuką iš elektros lizdo, kai nenaudojate ir prieš valydami. Prieš uždėdami ar nuimdami dalis ir prieš valydami prietaisą, leiskite atvėsti.
• Nenaudokite prietaiso su pažeistu laidu ar kištuku arba prietaisui sugedus arba jokiu būdu sugadinus.
• Prietaiso gamintojo nerekomenduojamų priedų naudojimas gali sukelti gaisrą, elektros smūgį arba susižaloti žmones.
• Nenaudoti lauke.
• Neleiskite laidui kaboti virš stalo ar prekystalio krašto ir neliesti karštų paviršių.
• Nedėkite ant įkaitusios dujinės ar elektrinės viryklės ar šalia jos, taip pat į įkaitintą orkaitę.
• Visada pirmiausia prijunkite kištuką prie prietaiso, o tada įjunkite laidą į elektros lizdą. Norėdami atjungti, išjunkite bet kurį valdiklį ir ištraukite kištuką iš elektros lizdo.
• Nenaudokite prietaiso ne pagal paskirtį.
• Scalding may occur if the reservoir cap is removed during the brewing cycle.
• Šis prietaisas skirtas tik buitiniam naudojimui.

Komponentai ir savybės

Familiarize yourself with the parts of your Mr. Coffee Espresso Maker.

1. Vandens rezervuaro dangtelis
2. Garų valdymo rankenėlė
3. Maitinimo įjungimo/išjungimo jungiklis
4. Indikatoriaus lemputė
5. Portafiltro rankena
6. Portafilteris
7. Glass Carafe with Stay-Cool Handle and Measuring System
8. Lašėjimo padėklas
9. Steam Wand / Frothing Wand
10. Matavimo kaušelis

Vaizdas: priekis view of the espresso maker highlighting various components such as the portafilter, steam wand, and control knob.

Sąranka ir pirmasis naudojimas

Išpakavimas

• Atsargiai nuimkite visas pakavimo medžiagas.
• Wash the portafilter, glass carafe, and measuring scoop in warm, soapy water. Rinse thoroughly and dry.
• Wipe the exterior of the espresso maker with a damp audinys.

Priming the Unit (Before First Use)

Before brewing coffee or frothing milk for the first time, it is essential to prime the unit to remove any manufacturing residues and ensure proper operation.

1. Fill the glass carafe with cold water up to the 4-shot mark.
2. Pour the water from the carafe into the water reservoir, located at the top of the machine. Securely close the water reservoir cap.
3. Padėkite tuščią stiklinį termosą ant lašėjimo padėklo.
4. Ensure the portafilter is securely locked into place (without coffee).
5. Turn the Steam Control Knob to the "Brew" position.
6. Plug the espresso maker into a standard electrical outlet.
7. Press the Power On/Off switch to the "On" position. The indicator light will illuminate.
8. Allow the water to heat and brew through the portafilter into the carafe.
9. Once all water has brewed, turn the Power On/Off switch to "Off" and unplug the unit.
10. Discard the water and rinse the carafe. The unit is now primed and ready for use.

Naudojimo instrukcijos

Espreso virimas

1. Paruoškite portafiltrą: Using the measuring scoop, add desired amount of finely ground espresso coffee into the portafilter. For a single shot, use one scoop; for a double shot, use two scoops. Gently tamp the coffee grounds evenly.
2. Pritvirtinkite portafiltrą: Align the portafilter with the group head and twist firmly to the right until it is securely locked in place.
3. Užpildykite vandens rezervuarą: Fill the glass carafe with cold water to the desired level (2-shot or 4-shot mark). Pour this water into the water reservoir and close the cap.
4. Padėties karafe: Place the empty glass carafe on the drip tray directly under the portafilter.
5. Pradėkite gaminti:
   • Ensure the Steam Control Knob is in the "Brew" position.
   • Plug in the unit and press the Power On/Off switch to "On". The indicator light will illuminate.
   • Allow the machine to heat up for approximately 2-3 minutes until the indicator light turns off, signaling it's ready to brew.
   • Once the light is off, turn the Steam Control Knob to the "Brew" position. Hot water will begin to flow through the coffee grounds into the carafe.
   • When the desired amount of espresso has been brewed, turn the Power On/Off switch to "Off".
6. Patiekti: Carefully remove the carafe and serve your fresh espresso.

Pieno putojimas kapučinams ir lattei

The integrated frothing wand allows you to create rich, frothy milk for your favorite specialty drinks.

1. Paruoškite pieną: Fill a stainless steel frothing pitcher (not included, but recommended) with cold milk (dairy or non-dairy) up to one-third full.
2. Garų vamzdelio padėtis: Panardinkite garų vamzdelio galiuką tiesiai po pieno paviršiumi.
3. Generate Steam:
   • Ensure the Power On/Off switch is "On" and the indicator light is off (meaning it's heated).
   • Slowly turn the Steam Control Knob to the "Steam" position. Steam will begin to release from the wand.
   • Hold the pitcher at a slight angle, moving it up and down gently to incorporate air and create foam.
   • Continue until the milk reaches the desired temperature and froth consistency. Be careful not to overheat the milk.
4. Nustokite garinti: Turn the Steam Control Knob back to the "Off" position.
5. Švarus lazdelė: Nedelsdami nuvalykite garų antgalį reklaminiuamp cloth to prevent milk residue from drying. Briefly turn the steam knob to "Steam" again to clear any milk from inside the wand, then turn it off.
6. Sujungti: Pour the frothed milk over your freshly brewed espresso to create a cappuccino or latte.

Priežiūra ir priežiūra

Kasdienis valymas

• Po kiekvieno naudojimo:
  • Išjunkite įrenginį ir leiskite jam visiškai atvėsti.
  • Remove the portafilter, discard used coffee grounds, and rinse the portafilter and filter basket under warm water.
  • Wash the glass carafe and measuring scoop in warm, soapy water.
  • Nuvalykite mašinos išorę skelbimuamp audinys.
  • Išvalykite lašų surinkimo padėklą ir groteles.
  • Wipe the steam wand immediately after frothing.

Descaling (Every 2-3 Months or as Needed)

Mineral deposits from water can affect the performance of your espresso maker. Descaling helps maintain optimal function.

1. Prepare a descaling solution by mixing equal parts white vinegar and water. Fill the water reservoir with this solution.
2. Place the empty carafe on the drip tray.
3. Turn the Steam Control Knob to "Brew".
4. Plug in the unit and turn the Power On/Off switch to "On".
5. Allow half of the solution to brew through the portafilter into the carafe.
6. Turn the Power On/Off switch to "Off" and let the unit sit for 15-20 minutes.
7. Turn the Power On/Off switch to "On" and brew the remaining solution.
8. Once complete, turn the Power On/Off switch to "Off", discard the solution, and rinse the carafe.
9. Run two full cycles of fresh, cold water through the machine to rinse thoroughly.

Trikčių šalinimas

Specifikacijos

Image: Diagram showing the dimensions of the Mr. Coffee 4-Shot Steam Espresso, Cappuccino, and Latte Maker, measuring 10 inches deep, 10 inches wide, and 12 inches high.

Garantija ir palaikymas

For warranty information, product registration, or customer support, please visit the official Mr. Coffee websvetainėje arba susisiekite su klientų aptarnavimo skyriumi.

Official Mr. Coffee Websvetainė: www.mcoffee.com

Please have your model number (BVMC-ECM271) and proof of purchase available when contacting support.