Moen Greenfield 4325BN Diverter Tub Spout

Įvadas

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Moen Greenfield 4325BN Brushed Nickel Diverter Tub Spout. Please read all instructions carefully before beginning installation to ensure proper function and to avoid damage.

The Moen Greenfield diverter tub spout is designed to complement the Greenfield bathroom collection, featuring a brushed nickel finish and a convenient diverter mechanism for directing water flow.

Pagrindinės savybės

• Baigti: Šlifuotas nikelis, suteikiantis šiltą pilką metalinę išvaizdą.
• Nukreiptuvo funkcija: Includes a lift rod to switch water flow between the tub spout and a showerhead.
• Ryšio tipas: 1/2-inch slip fit connection for easy installation.
• Ilgis: 7-3/8 inch length.
• Dizainas: Features unique beveled edges, coordinating with the Greenfield Collection.
• Patvarumas: Sukurtas ilgam tarnavimo laikui ir su „Moen“ ribota viso gyvenimo garantija.

Pakuotės turinys

Prieš pradėdami diegti, patikrinkite, ar yra visi komponentai:

• Diverter Tub Spout (Model 4325BN)
• Montavimo instrukcijos (šis dokumentas)

Image 1: Moen Greenfield 4325BN Brushed Nickel Diverter Tub Spout. This image displays the complete tub spout in its brushed nickel finish, highlighting its design and the integrated diverter lift rod.

Montavimo instrukcijos

This tub spout utilizes a 1/2-inch slip-fit connection. Ensure your existing plumbing is compatible with this connection type.

Image 2: Tub Spout Connection Types. This diagram illustrates the difference between IPS (threaded) and CC (slip fit) connections. The Moen 4325BN uses a CC (Slip Fit) connection, which requires a 5/32" hex wrench to secure the tub spout to the pipe.

Reikalingi įrankiai:

• 5/32-inch Hex Wrench (Allen Key)
• Plumber's Tape (optional, for threaded connections if applicable)
• Minkštas audinys

Diegimo žingsniai:

1. Paruoškite plotą: Ensure the water supply to the tub is turned off. Remove any existing tub spout. Clean the pipe extending from the wall.
2. Inspect the Pipe: The pipe extending from the wall should be approximately 1/2-inch in diameter and extend out 3/4 to 1 inch from the finished wall surface for optimal slip-fit connection.
3. Įdiekite snapelį: Slide the new Moen Greenfield tub spout onto the pipe. Ensure it is pushed firmly against the wall.
4. Secure the Spout: Locate the set screw on the underside of the tub spout, near the wall. Use a 5/32-inch hex wrench to tighten this set screw. Do not overtighten, but ensure it is snug to prevent the spout from rotating or pulling away from the wall.
5. Testas dėl nuotėkio: Turn the water supply back on. Run water through the tub spout and check for any leaks around the connection point. If leaks occur, turn off the water, slightly adjust the spout, and re-tighten the set screw.

Naudojimo instrukcijos

The Moen Greenfield 4325BN tub spout features a diverter for directing water flow.

• Tub Fill: To fill the tub, ensure the diverter lift rod is in the down position. Water will flow directly from the tub spout.
• Shower Mode: To divert water to the showerhead, pull the lift rod on top of the tub spout upwards. Water will then flow from the showerhead. Push the lift rod back down to return water flow to the tub spout.

Priežiūra ir valymas

To maintain the finish and performance of your Moen Greenfield tub spout, follow these guidelines:

• Reguliarus valymas: Reguliariai valykite snapelį minkštu,amp audinys.
• Venkite griežtų valiklių: Do not use abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the brushed nickel finish.
• Švelnus muilo tirpalas: For more thorough cleaning, use a mild soap solution and rinse thoroughly with water, then dry with a soft cloth.
• Vandens dėmių prevencija: Po kiekvieno naudojimo sausai nuvalykite snapelį, kad išvengtumėte vandens dėmių ir mineralų kaupimosi.

Trikčių šalinimas

If you encounter issues with your tub spout, refer to the following common solutions:

• Mažas vandens srautas: Check for obstructions in the spout or aerator (if applicable). Ensure the main water supply is fully open.
• Nuotėkis iš snapelio: If water drips from the spout when the diverter is engaged, the diverter mechanism may need cleaning or replacement. For leaks at the wall connection, ensure the set screw is tightened correctly and the pipe is properly seated.
• Diverter Not Engaging: If the diverter lift rod does not fully engage or disengage, check for mineral buildup or obstructions. Clean the mechanism if necessary.
• Spout Loose: Re-tighten the set screw on the underside of the spout using a 5/32-inch hex wrench.

For persistent issues, contact Moen customer support or a qualified plumber.

Specifikacijos

Garantija ir palaikymas

This Moen product is backed by Moen’s Limited Lifetime Warranty. For detailed warranty information, please refer to the official Moen websvetainėje arba susisiekite su „Moen“ klientų aptarnavimo tarnyba.

For technical assistance, replacement parts, or warranty claims, please contact Moen Incorporated directly:

• Gamintojas: Moen Incorporated
• Websvetainė: www.moen.com
• Klientų aptarnavimas: Žiūrėkite Moeną websvetainė, kurioje pateikiama naujausia kontaktinė informacija.