Wipcool Double Stage Vacuum Pump 2F3R User Manual

1. Įvadas

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Wipcool Double Stage Vacuum Pump Model 2F3R. Please read this manual thoroughly before operating the pump and retain it for future reference.

The Wipcool 2F3R vacuum pump is specifically designed for use with various refrigerants, including next-generation A2L refrigerants like R32 and R1234YF, as well as traditional refrigerants such as R410A and R22. Its design incorporates features for enhanced safety and performance in HVAC applications.

2. Saugos instrukcijos

Visada laikykitės toliau nurodytų saugos priemonių, kad išvengtumėte sužalojimų ir įrangos sugadinimo.

• Elektros sauga: Įsitikinkite, kad maitinimo šaltinis atitinka siurblio įtampątage (230 Volts). Do not operate with damaged cords or plugs. Always disconnect power before servicing.
• Suderinamumas su šaltnešiu: This pump is suitable for A2L refrigerants (R32, R1234YF) and other common refrigerants (R410A, R22). When working with flammable refrigerants (A2L), ensure proper ventilation and eliminate all potential ignition sources.
• Alyvos lygis: Regularly check the oil level using the sight glass. Do not operate the pump without oil or when the oil level is low. Use only recommended vacuum pump oil.
• Vėdinimas: Siurblį naudokite gerai vėdinamoje patalpoje, kad nesikauptų šaltnešio garai.
• Asmeninės apsaugos priemonės (AAP): Wear appropriate PPE, including safety glasses and gloves, when handling refrigerants and operating the pump.
• Tvarkymas: The pump weighs approximately 9.8 kg. Lift with care to avoid injury.
• Aplinkos sąlygos: Avoid operating the pump in wet or excessively dusty environments.

3. Pakuotės turinys

Išpakavę patikrinkite, ar yra visi daiktai ir ar jie nepažeisti:

• Wipcool Double Stage Vacuum Pump 2F3R
• Vartotojo vadovas (šis dokumentas)
• Maitinimo laidas
• Vacuum Pump Oil (may be included separately or pre-filled)

4. Produkto ypatybės

The Wipcool 2F3R vacuum pump incorporates several advanced features for reliable performance:

• Non-Sparking Design: Suitable for use with A2L refrigerants (R32, R1234YF) and other refrigerants (R410A, R22).
• Variklio be šepetėlių technologija: Offers a lighter design (over 25% lighter than similar products) and extended service life.
• Built-in Solenoid Valve: Prevents oil backflow into the system during power outages or shutdown.
• Overhead Vacuum Gauge: Provides a compact and easy-to-read display of vacuum levels.
• Integral Cylinder Structure: Padidina patikimumą ir ilgaamžiškumą.
• Reinforced Aluminum Alloy Oil Tank: Designed for effective heat dissipation and resistance to chemical corrosion.
• Oversized Sight Glass: Allows for easy monitoring of oil color and level.

5. Sąranka

1. Išpakavimas: Atsargiai išimkite vakuuminį siurblį iš pakuotės. Patikrinkite, ar nėra transportavimo pažeidimų.
2. Vieta: Place the pump on a stable, level surface in a well-ventilated area. Ensure adequate space around the pump for air circulation and heat dissipation.
3. Alyvos pildymas:
   • Nuimkite alyvos užpildymo dangtelį.
   • Pour appropriate vacuum pump oil into the reservoir until the level is between the MIN and MAX marks on the sight glass. Do not overfill.
   • Tvirtai užsukite alyvos įpylimo dangtelį.
4. Maitinimo jungtis: Connect the power cord to the pump and then to a grounded electrical outlet matching the specified voltage (230 V).
5. Pradinis patikrinimas: Before connecting to a system, briefly turn on the pump to ensure it operates smoothly and the oil circulates. Turn off immediately.

6. Naudojimo instrukcijos

Follow these steps for proper operation of the vacuum pump:

1. Prisijunkite prie sistemos: Connect the vacuum pump to the system requiring evacuation using appropriate vacuum hoses. Ensure all connections are tight to prevent leaks.
2. Open System Valves: Atidarykite visus kolektoriaus manometro rinkinio ir išsiurbiamos sistemos vožtuvus.
3. Paleisti siurblį: Turn on the power switch of the vacuum pump. The pump will begin to draw a vacuum.
4. Monitoriaus vakuumas: Observe the overhead vacuum gauge to monitor the vacuum level. Continue operation until the desired vacuum level is achieved, typically indicated by a stable reading.
5. Isolate Pump: Once the desired vacuum is reached, close the manifold gauge set valves to isolate the system from the pump.
6. Išjunkite siurblį: Išjunkite vakuuminį siurblį.
7. Atsijungti: Carefully disconnect the vacuum hoses from the pump and the system.

7. Priežiūra

Reguliarus valymas užtikrina optimalų veikimą ir prailgina vakuuminio siurblio tarnavimo laiką.

• Alyvos keitimas: Change the vacuum pump oil regularly, especially after each use with contaminated systems or when the oil appears discolored or cloudy.
  • Įsitikinkite, kad siurblys išjungtas ir atvėsęs.
  • Padėkite tinkamą indą po alyvos išleidimo kaiščiu.
  • Remove the oil drain plug and the oil fill cap to allow oil to drain completely.
  • Replace the drain plug and refill with new, clean vacuum pump oil to the correct level.
• Valymas: Keep the exterior of the pump clean and free of dust and debris. Ensure cooling fins are not obstructed.
• Saugykla: When not in use, store the pump in a dry, clean environment. Ensure the oil level is correct before storage.

8. Problemų sprendimas

9. Specifikacijos

10. Garantija ir palaikymas

This Wipcool 2F3R Double Stage Vacuum Pump comes with a 1 metų garantija nuo pirkimo datos.

For warranty claims, technical support, or service inquiries, please contact your authorized Wipcool dealer or the manufacturer's customer service department. Please have your model number (2F3R) and proof of purchase available when contacting support.