Įvadas
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Timex Men's Command Encounter 45mm Watch. Please read this manual carefully to ensure proper use and longevity of your timepiece.
Produktas baigtasview
The Timex Command Encounter is a robust digital watch designed for durability and functionality. It features a 45mm square case, a digital negative display, and is water-resistant up to 100 meters. The watch includes standard timekeeping functions, a chronograph, timer, and alarm.
1 pav.: priekis view of the Timex Command Encounter 45mm Watch. This image displays the watch face with its digital negative display, showing the time, date, and various mode indicators like CHRONO, TIMER, and ALARM. The watch features a green case and strap with a camouflage pattern on the display bezel.
2 pav.: šonas view of the Timex Command Encounter 45mm Watch. This image highlights the profile laikrodžio, šouasing the robust case design and the textured green strap. The buttons on the side of the watch are also visible.
3 pav.: galinis view of the Timex Command Encounter 45mm Watch. This image focuses on the stainless steel case back, which is engraved with "TIMEX", "SHOCK RESISTANT", "WATER RESISTANT 100M", and "STAINLESS STEEL BACK". The four screws securing the case back are also visible.
Sąranka
1. Pradinis įjungimas ir baterija
Your Timex Command Encounter watch comes with a pre-installed Lithium Metal battery (CR2025). The watch should be ready for use upon arrival. If the display is blank, press any button to activate it. If the watch does not power on, the battery may need replacement (refer to the Maintenance section).
2. Laiko ir datos nustatymas
- Paspauskite REŽIMAS button (typically on the lower left) repeatedly until the time setting mode is displayed. The seconds digits will likely be flashing.
- Paspauskite RESET button (typically on the lower right) to cycle through the adjustable fields: seconds, hours, minutes, year, month, day.
- Naudokite PRADĖTI button (typically on the upper right) to increase the value of the flashing field. Hold the button to rapidly advance the digits.
- Kai visi nustatymai bus teisingi, paspauskite REŽIMAS mygtuką, kad išeitumėte iš nustatymo režimo ir grįžtumėte į įprastą laiko rodymo režimą.
3. 12/24 valandų formatas
While in the time setting mode, when the hour digits are flashing, pressing the PRADĖTI button may toggle between 12-hour (with AM/PM indicator) and 24-hour formats. Consult the specific button functions for your model if this does not work as described.
Naudojimo instrukcijos
1. Pagrindinis laiko skaičiavimas
The watch displays the current time (hours, minutes, seconds) and date (month, day, day of week) in its primary mode. The negative display provides clear visibility in various lighting conditions.
2. INDIGLO® Night-Light
To activate the INDIGLO® night-light, press the INDIGLO button (typically on the upper left). The entire display will illuminate for a few seconds, allowing for easy reading in low-light environments.
3. Chronografas (chronometras)
- Paspauskite REŽIMAS mygtuką, kol ekrane pasirodys „CHRONO“ arba „STW“.
- Paspauskite PRADĖTI pradėti laiko skaičiavimą.
- Paspauskite PRADĖTI again to pause timing. Press PRADĖTI tęsti.
- To record a lap or split time, press SPL/SET while the chronograph is running. The display will momentarily show the lap time.
- To stop the chronograph, press STOP.
- To reset the chronograph to zero, press RESET sustojus.
4. Timer (Countdown)
- Paspauskite REŽIMAS button until "TIMER" or "TMR" appears on the display.
- Norėdami nustatyti atgalinį laiką, paspauskite RESET to select the flashing digit (hours, minutes, seconds). Use PRADĖTI norėdami pakoreguoti vertę.
- Paspauskite PRADĖTI pradėti skaičiuoti atgal.
- Paspauskite PRADĖTI dar kartą, norėdami pristabdyti. Paspauskite PRADĖTI tęsti.
- Kai laikmatis pasieks nulį, suskambės žadintuvas. Norėdami sustabdyti žadintuvą, paspauskite bet kurį mygtuką.
5. Signalizacija
- Paspauskite REŽIMAS mygtuką, kol ekrane pasirodys „ALARM“ arba „ALM“.
- Norėdami nustatyti žadintuvo laiką, paspauskite RESET to select the flashing digit (hours, minutes). Use PRADĖTI norėdami pakoreguoti vertę.
- Norėdami įjungti arba išjungti žadintuvą, paspauskite SPL/SETEkrane pasirodys / išnyks žadintuvo piktograma.
- Kai suskamba žadintuvas, paspauskite bet kurį mygtuką, kad jį nutildytumėte.
Priežiūra
1. Laikrodžio valymas
Reguliariai valykite laikrodį minkšta šluosteamp cloth. For stubborn dirt, a mild soap solution can be used, followed by rinsing with clean water and thorough drying. Avoid using harsh chemicals or abrasive materials, as these can damage the watch case or strap.
2. Atsparumas vandeniui
Your Timex Command Encounter watch is water-resistant up to 100 meters (330 feet). This means it is suitable for showering, swimming, and snorkeling. Do not press any buttons while the watch is submerged in water, as this can compromise the water resistance seal. Avoid exposing the watch to extreme temperature changes, which can also affect the seals.
3. Baterijos keitimas
The watch uses a CR2025 Lithium Metal battery. Battery life varies depending on usage, especially the frequency of INDIGLO® night-light activation. When the display dims or functions become erratic, it's time to replace the battery. Battery replacement should ideally be performed by a qualified watch technician to ensure the water resistance seal is properly re-seated.
If replacing the battery yourself, carefully remove the four screws on the case back (refer to Figure 3). Gently pry open the case back. Note the battery's orientation before removal. Replace with a new CR2025 battery, ensuring proper polarity. Carefully re-seat the gasket and secure the case back with the screws. Self-replacement may void warranty or compromise water resistance if not done correctly.
Trikčių šalinimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Ekranas tuščias arba blankus. | Žemas arba išsikrovęs akumuliatorius. | Pakeiskite CR2025 bateriją. |
| Laikas / data neteisingi. | Not set correctly or reset due to battery change. | Vadovaukitės instrukcijomis „Laiko ir datos nustatymas“, pateiktomis skyriuje „Sąranka“. |
| Mygtukai nereaguoja. | Laikrodis gali būti užrakintas arba baterija labai išsikrovusi. | Try pressing all buttons to see if any respond. If not, replace battery. If still unresponsive, contact support. |
| Vanduo laikrodžio viduje. | Compromised water resistance seal (e.g., buttons pressed underwater, extreme temperature changes, damaged gasket). | Nedelsdami nuneškite laikrodį į kvalifikuotą laikrodžių remonto centrą. Nebandykite jo džiovinti patys. |
Specifikacijos
- Modelio numeris: TW2V93700VQ
- Korpuso dydis: 45 mm
- Dirželio medžiaga: Green (8 inch)
- Ekrano tipas: Digital Negative Display
- Objektyvo medžiaga: Mineralinis stiklas
- Atsparumas vandeniui: 100 metrų (330 pėdos)
- Baterijos tipas: 1 ličio metalo baterija (CR2025)
- Savybės: Chronograph, Timer, Alarm, INDIGLO® Night-Light
- Kilmės šalis: Kinija
Garantija ir palaikymas
Timex watches are manufactured to high standards and come with a limited warranty. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Timex websvetainėje. Išsaugokite pirkimo įrodymą garantiniams reikalavimams.
For technical support, service, or parts, please contact Timex Customer Service. Contact information can typically be found on the Timex websvetainėje arba ant pakuotės.
Oficialus Timex Websvetainė: www.timex.com
