1. Įvadas
This manual provides essential information for the safe and efficient use of your PowMr 12V 100Ah LiFePO4 Lithium Battery. This battery is designed for various applications including solar systems, RVs, boats, and off-grid setups, offering a reliable and long-lasting power solution. Please read this manual thoroughly before installation and operation.
2. Saugos informacija
Always prioritize safety when handling batteries. Failure to follow these instructions may result in serious injury, property damage, or damage to the battery.
- Nejunkite akumuliatoriaus gnybtų trumpojo jungimo.
- Nelaikykite baterijos nuo ugnies ar didelio karščio.
- Do not immerse the battery in water or other liquids. The battery is IP65 waterproof, but prolonged immersion is not recommended.
- Neardykite, netraiškykite ir nepradurkite akumuliatoriaus.
- Naudokite tik suderinamus įkroviklius ir įkrovimo būdus.
- Įkrovimo ir iškrovimo metu užtikrinkite tinkamą vėdinimą.
- Saugokite akumuliatorių nuo vaikų ir naminių gyvūnėlių.
- Dirbdami su baterijomis, dėvėkite tinkamas asmenines apsaugos priemones (AAP), tokias kaip pirštinės ir akių apsauga.
- This battery is not intended for use as a starter battery.
Image: A special reminder icon, emphasizing important safety notes.
3. Pakuotės turinys
Atidarius pakuotę, patikrinkite, ar yra visi komponentai ir ar jie nepažeisti:
- 1 x PowMr 12V 100Ah LiFePO4 Lithium Battery
- 2 x M8 Terminal Bolts
- 2 x poveržlės
Video: Unboxing the PowMr 12V 100Ah LiFePO4 Lithium Battery, showing the battery, terminals, and screws. This video provides a visual guide to the package contents.
Image: The PowMr 12V 100Ah LiFePO4 battery with M8 terminal bolts, illustrating the included hardware.
4. Produkto ypatybės
- Ilgas tarnavimo laikas: Offers 4000+ cycles with 100% Depth of Discharge (DoD), providing a service life of up to 10 years.
- Lengvas dizainas: Weighs approximately 11.5kg, significantly lighter than traditional lead-acid batteries, enhancing portability.
- Integruota 100A BMS: Integrated Battery Management System protects against overcharge, overdischarge, overcurrent, and short circuits.
- Išplečiama talpa: Supports series and parallel connections for increased capacity and voltage (up to 4S4P for max 51.2V and 400Ah).
- Platus pritaikymas: Tinka nameliams ant ratų, camping, marine, solar systems, home energy storage, and off-grid applications.
- IP65 atsparus vandeniui: Provides protection against dust and water splashes, suitable for indoor and outdoor installations.
Image: A diagram illustrating the various protections offered by the built-in 100A BMS, including overcharge, overdischarge, overcurrent, short circuit, cell voltage, and high-temperature protection.
Paveikslėlis: Vizualus palyginimas, išryškinantis pranašumątages of the PowMr LiFePO4 battery over traditional lead-acid batteries in terms of weight, cycle life, service life, and depth of discharge.
5. Sąranka ir diegimas
5.1. Pirminė apžiūra
Before installation, inspect the battery for any physical damage. Ensure the terminals are clean and free of corrosion.
5.2. Baterijos prijungimas
Connect the battery to your system using appropriate cables and connectors. Ensure correct polarity: positive (+) to positive and negative (-) to negative. Use the provided M8 terminal bolts to secure connections tightly.
Image: A diagram showing how to connect batteries, indicating positive and negative terminals.
5.3. Nuosekliosios ir lygiagrečiosios jungtys
The PowMr 12V 100Ah LiFePO4 battery supports both series and parallel connections to achieve higher voltage or capacity. It can be connected in series up to 4 units (4S) and in parallel up to 4 units (4P), allowing for configurations such as 4S4P for a maximum of 51.2V and 400Ah.
- Lygiagretus ryšys: Sujunkite teigiamus ir neigiamus polius, kad padidintumėte talpą (Ah), išlaikydami tą pačią tūrį.tage (V).
- Serijos jungtis: Prijunkite vienos baterijos teigiamą gnybtą prie kitos baterijos neigiamo gnybto, kad padidintumėte įtampątage (V), išlaikant tą pačią talpą (Ah).
- Always ensure all batteries in a series or parallel bank are of the same type, capacity, and state of charge before connecting.
Image: A diagram illustrating various expandable capacity configurations, including a 4S4P setup for maximum energy storage.
Image: A schematic showing the PowMr LiFePO4 battery integrated into a solar power system, connecting solar panels, an MPPT controller, and an inverter to power various household loads.
6. Naudojimo instrukcijos
6.1. Įkrovimas
The battery supports a 50A charging current. Use a compatible LiFePO4 charger or a solar charge controller (MPPT recommended) designed for lithium iron phosphate batteries. Ensure the charging voltage is within the recommended range (typically 14.2V - 14.6V).
Image: A split image showing the battery being charged by a dedicated battery charger on one side and a solar panel setup with an MPPT controller charging the battery on the other.
6.2. Iškrovimas
The battery supports a 100A continuous discharge current. The built-in BMS will protect the battery from over-discharge. Ensure your load does not exceed the maximum continuous discharge current to prevent the BMS from triggering protection mode.
6.3. Darbinė temperatūra
Observe the recommended operating temperature ranges:
- Įkrovimas: nuo 0°C iki 50°C (32°F iki 122°F)
- Iškrovimas: -20°C iki 60°C (nuo -4°F iki 140°F)
- Saugykla: -10°C iki 50°C (14°F iki 122°F)
Image: A thermometer graphic indicating the safe operating temperature range for the battery.
7. Priežiūra
- Reguliarus patikrinimas: Periodically check the battery terminals for cleanliness and tightness. Ensure there are no signs of damage or swelling.
- Valymas: Baterijos korpusą nuvalykite sausa šluoste.asing. Nenaudokite tirpiklių ar abrazyvinių valiklių.
- Saugykla: If storing the battery for an extended period, ensure it is charged to approximately 50-70% State of Charge (SoC) and stored in a cool, dry place within the recommended storage temperature range. Recharge every 3-6 months to prevent deep discharge.
8. Problemų sprendimas
If you encounter issues with your PowMr LiFePO4 battery, refer to the following common problems and solutions:
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Akumuliatorius neįkraunamas | Charger not connected, charger fault, BMS protection triggered (over-discharge, over-voltage, low temperature) | Check charger connection and functionality. Verify charging parameters. Allow battery to warm up if too cold. If BMS is in protection, disconnect load/charger for a few minutes to reset. |
| Akumuliatorius neišsikrauna | BMS protection triggered (over-discharge, overcurrent, high temperature), loose connections | Check all connections. Reduce load if overcurrent. Allow battery to cool down if too hot. Recharge the battery if it's in over-discharge protection. |
| Sumažinta talpa / veikimo laikas | Aging battery, improper charging, extreme operating temperatures | Užtikrinkite tinkamą įkrovimo garsumątage and current. Operate within recommended temperature ranges. If battery is very old, consider replacement. |
If the problem persists after attempting these solutions, please contact PowMr customer support.
9. Specifikacijos
| Parametras | Vertė |
|---|---|
| Prekės ženklas | PowMr |
| Modelis | 12.8 V 100 Ah |
| Baterijos tipas | LiFePO4 (ličio geležies fosfatas) |
| Nominalus ttage | 12.8 V |
| Nominali talpa | 100 Ah |
| Energija | 1280 Wh |
| Maks. Įkrovimo ttage | 14.6 V |
| Maks. Nuolatinė įkrovimo srovė | 50A |
| Maks. Nuolatinė iškrovimo srovė | 100A |
| Integruotas BMS | 100A |
| Ciklo gyvenimas | 4000+ cycles (100% DoD) |
| Matmenys (L*P*A) | 325 * 170 * 215 mm (12.79 colio gylis x 6.69 colio plotis x 8.46 colio aukštis) |
| Svoris | 11.5 kg |
| Terminalo tipas | M8 terminalas |
| Atsparumo vandeniui įvertinimas | IP65 |
| Įkrovimo temperatūra | 0°C iki 50°C |
| Iškrovimo temperatūra | -20°C iki 60°C |
| Laikymo temperatūra | -10°C iki 50°C |
Image: The PowMr 12.8V 100Ah LiFePO4 battery displayed alongside a table summarizing its key technical specifications.
10. Garantija ir palaikymas
Dėl garantijos informacijos, techninės pagalbos ar paslaugų kreipkitės į oficialų „PowMr“ websvetainėje arba susisiekite tiesiogiai su jų klientų aptarnavimo tarnyba. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą garantijos pretenzijoms.
PowMr Official Websvetainė: www.powmr.com