Įvadas
The Phrozen Cure Mega S is an advanced resin curing station designed for post-processing 3D printed models. It features both drying and UV curing functions, a 360-degree transparent turntable, and dual high-speed fans to ensure efficient and uniform curing of large and small models. This manual provides essential information for the safe and effective operation, setup, and maintenance of your Phrozen Cure Mega S.
Saugos informacija
Please read all safety instructions carefully before operating the device to prevent injury or damage.
- Always wear appropriate personal protective equipment (PPE), such as gloves and eye protection, when handling uncured resin or models that have not been fully cured.
- Ensure the device is placed on a stable, level surface away from direct sunlight and flammable materials.
- Do not look directly at the UV light source during operation.
- Laikykite prietaisą atokiau nuo vandens ar kitų skysčių, kad išvengtumėte elektros smūgio.
- Prieš valydami ar atlikdami bet kokią techninę priežiūrą, atjunkite įrenginį nuo elektros lizdo.
- Laikyti vaikams ir naminiams gyvūnėliams nepasiekiamoje vietoje.
Produktas baigtasview
The Phrozen Cure Mega S is a robust curing station designed for large-scale and high-volume post-processing. Its intuitive design allows for easy access and efficient operation.
Vaizdas: priekis view of the Phrozen Cure Mega S curing station, showcasing its compact, black enclosure with a transparent orange-tinted door.
Pagrindiniai komponentai
- Main Curing Chamber: The enclosed space where models are dried and cured.
- Transparent Turntable: Rotates models 360 degrees for even curing.
- UV šviesos šaltinis: Emits 405nm UV light for resin solidification.
- High-Speed Fans: Two fans for efficient drying of models.
- Jutiklinis skydelis: User interface for controlling drying and curing settings.
- Removable Rack: Allows for flexible curing of various model sizes.
- Side-Swing Door: Provides easy access to the curing chamber.
- Built-In Interior Light: Illuminates the chamber for monitoring progress.
Image: Visual representation of the Phrozen Cure Mega S's smart design, highlighting the side-swing door, interior lighting, and the touch panel interface.
Sąranka
Follow these steps for the initial setup of your Phrozen Cure Mega S.
- Išpakuokite įrenginį: Carefully remove the Phrozen Cure Mega S from its packaging. Retain all packaging materials for future transport or storage.
- Pasirinkite vietą: Place the curing station on a flat, stable, and heat-resistant surface in a well-ventilated area. Ensure there is sufficient space around the unit for air circulation.
- Prijunkite maitinimą: Plug the power cord into the power input port on the back of the unit, then plug the other end into a grounded electrical outlet.
- Install Turntable: Place the transparent turntable securely onto the rotating mechanism inside the curing chamber.
- Optional Rack Installation: If curing smaller or multiple models, install the removable rack at the desired height within the chamber.
- Maitinimas: Press the power button on the touch panel to turn on the device.
Operacija
The Phrozen Cure Mega S offers versatile drying and curing options for your 3D printed models.
Drying and Curing Functions
The device allows you to select between drying, curing, or a combined dry and cure cycle.
- Džiovinimo režimas: Utilizes dual high-speed fans (1700 RPM) to quickly dry models, removing residual alcohol or moisture after washing.
- Curing Mode: Activates the 405nm UV light source to solidify resin models, enhancing their hardness and durability. The 360-degree light source and rotating turntable ensure uniform exposure.
- Dry & Cure Mode: Performs a drying cycle followed by a curing cycle automatically, streamlining the post-processing workflow.
Image: Depicts the Phrozen Cure Mega S in operation, highlighting its dual-action drying (1700 RPM) and 360-degree curing capabilities.
Jutiklinio skydelio naudojimas
The touch panel provides intuitive control over the device's functions.
- Pasirinkite režimą: On the main screen, tap the desired mode: Fan + Cure (Dry & Cure), UV Cure, arba Ventiliatorius (Drying).
- Nustatyti laiką: Use the '+' and '-' buttons to adjust the duration for the selected mode. Recommended curing times vary based on resin type and model size.
- Pradėti ciklą: Press the 'Start' button to begin the process. The interior light will activate, and the turntable will begin to rotate.
- Stebėti pažangą: Use the built-in interior light to observe the drying or curing state of your models through the transparent door.
- Ciklo pabaiga: The device will automatically stop once the set time has elapsed. You can also manually stop the cycle by pressing the 'Stop' button.
Image: Illustrates the detachable rack feature, showing how it accommodates both large single models and multiple smaller models for flexible curing.
Priežiūra
Regular maintenance ensures optimal performance and longevity of your Phrozen Cure Mega S.
- Kameros valymas: After each use, especially if resin spills occur, wipe down the interior of the curing chamber with a soft cloth dampened with isopropyl alcohol (IPA). Ensure the device is unplugged.
- Patefono valymas: Remove the turntable and clean it with IPA. Ensure it is completely dry before placing it back into the unit.
- Išorinis valymas: Išorinius paviršius nuvalykite minkštu, sausu skudurėliu. Venkite naudoti abrazyvinius valiklius ar tirpiklius.
- UV šviesos šaltinis: Periodically check the UV LEDs for any dust or residue and gently clean them with a soft, dry cloth if necessary.
- Saugykla: Kai prietaisas ilgą laiką nenaudojamas, laikykite jį vėsioje, sausoje vietoje, toliau nuo tiesioginių saulės spindulių.
Trikčių šalinimas
This section addresses common issues you might encounter with your Phrozen Cure Mega S.
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Įrenginys neįsijungia. | Maitinimo laidas netinkamai prijungtas; iš lizdo nėra elektros. | Patikrinkite maitinimo laido jungtį. Išbandykite lizdą su kitu įrenginiu. |
| UV light not activating. | Curing mode not selected; door not fully closed. | Ensure 'UV Cure' or 'Fan + Cure' mode is selected. Close the door securely. |
| Sukamoji lėkštė nesisuka. | Turntable not properly seated; obstruction. | Re-seat the turntable. Check for any debris obstructing rotation. |
| Models not curing evenly. | Insufficient curing time; models too close together. | Increase curing time. Ensure models are spaced adequately on the turntable. |
| Models not drying effectively. | Drying mode not selected; fans obstructed. | Ensure 'Fan' or 'Fan + Cure' mode is selected. Check for obstructions near fan vents. |
Specifikacijos
Technical specifications for the Phrozen Cure Mega S.
| Funkcija | Detalė |
|---|---|
| Modelio numeris | CUREMEGAS00US |
| Gaminio matmenys | 15.6"D x 18.7"W x 19.1"H (39.5cm W x 47.5cm D x 48.6cm H) |
| Prekės svoris | 15 kilogramo (33.07 svaro) |
| Medžiaga | Metalas |
| Curing Wavelength | 405nm UV Light |
| Ventiliatoriaus greitis | 1700 RPM (Dual Fans) |
| Turntable Rotation | 360 laipsnių |
| Gamintojas | PHROZEN TECH CO., LTD. |
| Pirmoji laisva data | 9 m. rugpjūčio 2023 d |
Image: Diagram showing the physical dimensions of the Phrozen Cure Mega S: 47.5cm depth, 39.5cm width, and 48.6cm height.
Garantija ir palaikymas
For warranty information, technical support, or service inquiries, please contact Phrozen customer support through their official websvetainę arba mažmenininką, iš kurio buvo pirktas produktas.
Internetiniai ištekliai: Visit the official Phrozen website for FAQs, updated drivers, and additional support materials.
Kontaktinė informacija: Refer to your purchase documentation or the Phrozen websvetainę, kurioje pateikiami konkretūs kontaktiniai duomenys.
