„Wallbox“ galios matuoklio UL korpuso priedo naudotojo vadovas

1. Įvadas

This manual provides essential information for the installation, operation, and maintenance of the Wallbox Power Meter UL Enclosure Accessory. This enclosure is designed to provide durable protection for your Wallbox Power Meter from various external conditions, ensuring its longevity and reliable performance.

The Wallbox Power Meter, when paired with a Pulsar Plus EV charger, enables precise control over your home's energy consumption, facilitating potential energy savings.

Priekyje view of the Wallbox Power Meter UL Enclosure Accessory

1.1 pav.: priekis view of the Wallbox Power Meter UL Enclosure Accessory, showing the transparent face and Wallbox branding.

2. Sąranka ir diegimas

The Wallbox Power Meter UL Enclosure is designed for straightforward installation. All necessary hardware is included to facilitate the mounting of your power meter within the enclosure.

2.1. Pakuotės turinys

Wallbox Power Meter UL Enclosure
DIN rail (pre-installed or included for installation)
Montavimo įranga (varžtai, inkarai ir kt.)

2.2. Diegimo žingsniai

Pasirinkite vietą: Choose a suitable location for mounting the enclosure, considering environmental factors and accessibility. The enclosure is designed for both indoor and outdoor use.
Mount Enclosure: Securely mount the enclosure to a wall or flat surface using the provided mounting hardware. Ensure it is level and stable.
Install Power Meter: Open the enclosure using the stainless steel hinges. Install your Wallbox Power Meter onto the integrated DIN rail.
Prijunkite laidus: Route necessary wiring for the power meter through the designated entry points. Ensure all connections are secure and comply with local electrical codes.
Uždaryti ir užtikrinti saugumą: Close the enclosure door and ensure it is properly latched. The design allows for anti-tampering measures (seal or lock not included).

Wallbox Power Meter UL Enclosure with door open, showing the interior DIN rail

Figure 2.1: The enclosure with its door open, revealing the internal DIN rail for power meter installation.

Wallbox Power Meter UL Enclosure mounted on a wall next to an electric vehicle

2.2 paveikslas: buvęsample of the enclosure mounted on a wall in a typical installation environment.

3. Veikimo principai

The UL Enclosure Accessory functions as a protective housing for the Wallbox Power Meter. It does not directly influence the operation of the power meter itself but ensures its safe and reliable functioning by shielding it from environmental elements.

Once the Wallbox Power Meter is installed within the enclosure and connected to your electrical system and a compatible Wallbox Pulsar Plus EV charger, it will begin monitoring your home's energy consumption. This data is crucial for enabling advanced energy management features, such as dynamic load balancing and solar energy integration, through the Wallbox ecosystem.

Diagram illustrating a home with solar panels, an EV charger, and the power meter, showing energy flow

Figure 3.1: Conceptual diagram of the Wallbox Power Meter's role in managing home energy, including solar integration.

4. Priežiūra ir priežiūra

The Wallbox Power Meter UL Enclosure is constructed from durable polycarbonate and stainless steel, designed for minimal maintenance and maximum protection. Its robust construction ensures the longevity of your power meter.

4.1. Valymas

Korpuso išorę nuvalykite minkšta,amp šluoste pagal poreikį, kad pašalintumėte dulkes ar nešvarumus.
Avoid using abrasive cleaners or solvents, as these may damage the polycarbonate material.

4.2. Apžiūra

Periodically inspect the enclosure for any signs of physical damage, such as cracks or loose hinges.
Ensure the door seal is intact to maintain its IP67 rating against dust and water ingress.

5. Problemų sprendimas

This section addresses common concerns related to the enclosure itself. For issues related to the Wallbox Power Meter's functionality, please refer to the power meter's specific user manual.

Problema	Galima priežastis	Sprendimas
Enclosure door does not close securely.	Obstruction in hinge or latch mechanism; damaged hinges.	Check for debris and clear. Inspect hinges for damage; if damaged, contact customer service.
Water or dust ingress observed inside enclosure.	Damaged or improperly seated seal; enclosure not closed properly.	Ensure door is fully closed and latched. Inspect the rubber seal around the door for damage or displacement.
Difficulty installing power meter on DIN rail.	Power meter not aligned correctly; debris on DIN rail.	Ensure power meter is correctly oriented and aligned with the DIN rail. Clear any debris from the rail.

For further assistance, please contact Wallbox customer service.

6. Techninės specifikacijos

Funkcija	Specifikacija
Modelio numeris	MTR-UL-Enclousure
Suderinamumas	Wallbox Power Meter
Sertifikatai	UL Certified, Type 1, NEMA 4X, IP67
Medžiaga	Polycarbonate, Stainless Steel
Spalva	Light Gray (with transparent face)
Matmenys (I x P x A)	6 x 3.5 x 7.75 colio
Svoris	1.25 svaro
Gamybos vieta	Ispanija

7. Garantija ir palaikymas

For information regarding product warranty, please refer to the official Wallbox warranty policy available on the Wallbox website or contact Wallbox customer service directly.

Wallbox provides US-based customer service for support and inquiries.

Kontaktinė informacija:

Visit the official Wallbox websvetainę, kurioje rasite pagalbos išteklius ir kontaktinę informaciją.
Refer to your product packaging or Wallbox documentation for specific customer service phone numbers or email addresses.

	„Wallbox Pulsar Plus“ įrengimo vadovas This official Installation Guide for the Wallbox Pulsar Plus provides comprehensive instructions for setting up your electric vehicle charging station. It covers both NEMA plug-in and hardwire installation methods, including safety precautions, required tools, mounting, electrical wiring, and initial operation. Learn how to safely install and prepare your Pulsar Plus charger for use.
	„Wallbox“ energijos skaitiklių montavimo vadovas Išsamus „Wallbox“ energijos skaitiklių įrengimo vadovas, apimantis „Power Boost“ ir „Eco-Smart“ funkcijas. Apima suderinamumo lenteles, laidų schemas, medžiagas, įrankius ir svarbias saugos pastabas, skirtas įvairiems „Wallbox“ energijos skaitiklių modeliams.
	„Wallbox Pulsar Plus“ įrengimo vadovas Comprehensive installation guide for the Wallbox Pulsar Plus electric vehicle charger, covering NEMA plug-in and hardwire installations, safety instructions, component lists, and operating procedures.
	„Wallbox EMS“ įrengimo vadovas: įkrovikliai ir energijos valdymo funkcijos Išsamus „Wallbox“ vadovas, kuriame išsamiai aprašomas energijos valdymo sprendimų (EMS) diegimas, įskaitant „Pulsar Plus“, „Commander 2“, „Copper SB“, „Quasar“ ir „Pulsar Max“ įkroviklius. Išmokite nustatyti „Power Boost“, „Eco-Smart“, „V2H“, energijos bendrinimo ir dinaminio energijos bendrinimo funkcijas.
	„Wallbox Pulsar Plus“ įrengimo vadovas Išsamus „Wallbox Pulsar Plus“ elektromobilių įkroviklio įrengimo vadovas, kuriame aprašomas įrengimas, laidų sujungimas, veikimas ir trikčių šalinimas. Apima saugos instrukcijas, pakuotės turinį ir laidinio / kištukinio įkroviklio įrengimo procedūras.
	„Wallbox Fuse Box Lite“ ir „Pro“ montavimo vadovas \| Specifikacijos, sauga, surinkimas Sužinokite, kaip saugiai sumontuoti „Wallbox Fuse Box Lite“ ir „Pro“, vadovaudamiesi šiuo išsamiu įrengimo vadovu. Jame pateikiamos specifikacijos, saugos įspėjimai, surinkimo veiksmai ir prijungimo procedūros.

Wallbox MTR-UL-Enclousure