DTEN D7X 75" Windows versijos naudotojo vadovas

Įvadas

This user manual provides detailed instructions for the installation, operation, and maintenance of your DTEN D7X 75" Windows Edition interactive display. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

The DTEN D7X 75" Windows Edition is an all-in-one video conferencing and interactive display solution designed for modern workspaces. It integrates a high-resolution display, powerful computing, advanced camera, and microphone array to deliver a seamless collaborative experience.

Sąrankos vadovas

Išpakavimas ir apžiūra

1. Carefully open the packaging and remove the DTEN D7X unit.
2. Inspect the unit for any signs of damage during transit. If damage is found, contact your vendor immediately.
3. Verify all components are present: DTEN D7X 75" unit, power cable, remote control (if applicable), and documentation.

Įdėjimas

Choose a stable and level surface or a compatible wall mount for the DTEN D7X. Ensure adequate ventilation around the unit. Avoid placing it in direct sunlight or near heat sources.

Maitinimo prijungimas

1. Connect the provided power cable to the power input port on the back of the DTEN D7X.
2. Kitą maitinimo laido galą prijunkite prie įžeminto elektros lizdo.
3. The power indicator light should illuminate, indicating the unit is receiving power.

Initial Boot-up and Configuration

Upon first power-on, the DTEN D7X will guide you through the initial Windows setup process. Follow the on-screen prompts to configure network settings, time zone, and user accounts.

Figure 1: The DTEN D7X 75" Windows Edition display interface, showing a typical meeting screen with options for joining or starting a call, sharing content, and using the whiteboard feature. The top right corner displays a sharing key.

Naudojimo instrukcijos

Maitinimo įjungimas/išjungimas

• To power on: Press the power button located on the side/back of the unit or use the remote control.
• To power off: Access the Windows Start menu and select "Power" then "Shut down". Alternatively, press and hold the power button for a few seconds.

Jutiklinio ekrano naudojimas

The DTEN D7X features a responsive multi-touch display. Use your fingers or a compatible stylus for navigation, writing, and drawing. Standard Windows gestures are supported.

Vaizdo konferencijos

The device is optimized for video conferencing. Launch your preferred conferencing application (e.g., Zoom, Microsoft Teams) from the desktop. The integrated camera, microphone array, and speakers are automatically detected and configured.

• Starting a Meeting: Open the conferencing application and select "New Meeting" or "Meet".
• Prisijungimas prie susirinkimo: Select "Join" and enter the meeting ID or personal link.
• Dalijimasis turiniu: Use the "Share Screen" option within your conferencing application to share your desktop, specific applications, or a whiteboard.

Lenta

Access the built-in whiteboard application for collaborative brainstorming. Use the touch display to write, draw, and annotate. Content can typically be saved or shared directly from the application.

Priežiūra

Ekrano valymas

• Prieš valydami visada išjunkite ir atjunkite įrenginį nuo elektros tinklo.
• Šiek tiek naudokite minkštą, be pūkelių šluostę dampnuplaukite vandeniu arba neabrazyviniu ekrano valikliu.
• Nepurkškite skysčio tiesiai ant ekrano.
• Avoid using harsh chemicals, alcohol, or abrasive materials.

Programinės įrangos atnaujinimai

Regularly check for and install Windows updates and DTEN firmware updates to ensure optimal performance and security. These updates are typically managed through the Windows Update settings or a dedicated DTEN application.

Vėdinimas

Ensure that the ventilation openings on the unit are not blocked. Proper airflow is crucial to prevent overheating and maintain the longevity of the device.

Trikčių šalinimas

If the problem persists after attempting these solutions, please contact DTEN customer support for further assistance.

Specifikacijos