Produktas baigtasview
The Artillery Sidewinder X3 Pro is a high-performance 3D printer designed for both beginners and experienced users. It features a robust build, high-speed printing capabilities, and advanced functionalities to ensure precise and efficient model creation.
Figure 1: Artillery Sidewinder X3 Pro 3D Printer, showcasing its compact and sturdy design.
- Ultra-Quiet High-Speed Printing: Capable of printing at speeds up to 300 mm/s while maintaining high precision.
- 49-Point Auto Bed Leveling: Ensures quick and accurate leveling of the build platform, simplifying the setup process.
- Direct Drive Extruder: Features a newly developed metal direct drive extruder with a dual gear set for higher drive ratio and stronger extrusion force, leading to more accurate extrusion.
- Dual Z-axes & Dual Motors: Enhances stability and printing accuracy by reducing lines and ridges on prints.
- Tęsti spausdinimą funkcija: Detects filament runout, breakage, or power loss, allowing printing to resume after recovery, preventing material waste.
Sąranka ir surinkimas
The Artillery Sidewinder X3 Pro comes 95% pre-installed, making the initial setup straightforward. Installation to first print typically requires only 4 steps and approximately 10 minutes, even for beginners.
Figure 2: Illustrated assembly steps for the Sidewinder X3 Pro, highlighting the minimal effort required for initial setup.
Pradiniai žingsniai:
- Išpakavimas: Atsargiai išimkite visus komponentus iš pakuotės. Įsitikinkite, kad yra visos pakuotės sąraše išvardytos dalys.
- Base and Gantry Assembly: Attach the gantry to the printer base using the provided screws.
- Kabelių jungtys: Connect all necessary cables, ensuring they are securely fastened. Pay attention to the hotend and extruder connections.
- Gijos įkrovimas: Load your chosen filament into the direct drive extruder.
- Maitinimas: Prijunkite maitinimo laidą ir įjunkite spausdintuvą.
Naudojimo instrukcijos
Vartotojo sąsaja:
The Sidewinder X3 Pro features a 4.3-inch full-color touchscreen with large icons, providing a simple and feature-rich interface that helps prevent misoperation.
Figure 3: The 4.3-inch full-color touchscreen interface of the Sidewinder X3 Pro, designed for intuitive navigation.
Auto Bed Leveling:
The newly upgraded 49-point auto bed leveling system ensures the build platform is quickly and accurately leveled, which is crucial for successful first layers and overall print quality.
Figure 4: Visual representation of the 49-point smart auto-leveling process, which automatically measures and adjusts the print bed.
Didelės spartos spausdinimas:
The Sidewinder X3 Pro is engineered for high-speed printing, reaching up to 300 mm/s, allowing for faster completion of prints without compromising precision.
Figure 5: Comparison illustrating the speed advantage of the Sidewinder X3 Pro at 300mm/s compared to slower printers.
Extrusion System:
Equipped with a dual-gear direct extruder, the printer provides powerful and smoother filament feeding, which is essential for consistent and high-quality prints. The all-metal automatic cleaning hotend supports printing temperatures up to 300°C.
6 pav. Išsamus view of the dual-gear direct extruder, designed for powerful and precise filament extrusion.
Figure 7: Illustration of the all-metal automatic cleaning hotend, capable of reaching temperatures up to 300°C.
Print Stability and Accuracy:
The dual Z-axes and dual motors design ensures stable movement of the print head and contributes to higher printing accuracy by minimizing artifacts like lines and ridges on your prints.
Figure 8: Diagram showing the dual Z-axes and dual motors, which provide enhanced stability and precision during printing.
Print Volume and Build Plate:
The printer offers a print size of 9.44" x 9.44" x 10.23" (240mm x 240mm x 260mm), suitable for a wide range of projects. It features a PEI Magnetic Platform with a maximum hotbed temperature of 100°C. Models can be easily removed by slightly bending the platform once cooled.
Figure 9: Illustration of the print volume dimensions and the PEI magnetic build platform, demonstrating easy print removal.
Priežiūra
Regular maintenance ensures the longevity and optimal performance of your Artillery Sidewinder X3 Pro 3D printer.
- Hotend Cleaning: The printer features an automatic cleaning hotend. Periodically inspect the nozzle for any residue or clogs.
- Spausdinimo plokštės priežiūra: Clean the PEI magnetic build plate after each print to ensure good adhesion for subsequent prints. Use isopropyl alcohol for best results.
- Tepimas: Apply a small amount of lubricant to the Z-axis lead screws and smooth rods periodically to ensure smooth movement.
- Firmware atnaujinimai: Check the official Artillery websvetainėje, kurioje pateikiami visi galimi programinės įrangos atnaujinimai, kad jūsų spausdintuve būtų įdiegtos naujausios funkcijos ir ištaisytos klaidos.
- Bendras valymas: Laikykite spausdintuvą švarų nuo dulkių ir kaitinimo siūlelio likučių. Sunkiai pasiekiamas vietas valykite suslėgtu oru.
Trikčių šalinimas
This section provides solutions to common issues you might encounter during the operation of your Sidewinder X3 Pro.
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Spausdinimas nelimpa prie lovos | Improper bed leveling, dirty build plate, incorrect bed temperature. | Perform auto bed leveling. Clean the build plate with isopropyl alcohol. Adjust bed temperature according to filament type. |
| Filament Not Extruding | Clogged nozzle, tangled filament, incorrect hotend temperature, extruder issue. | Check hotend temperature. Clear nozzle clog using a needle or cold pull. Ensure filament spool is free and untangled. Inspect extruder for proper function. |
| Printer Stops Mid-Print | Filament runout/breakage, power loss, corrupted G-code. | Utilize the resume printing function. Check filament path. Ensure stable power supply. Reslice and re-upload G-code. |
| Prasta spausdinimo kokybė (sluoksnių pasislinkimas, stygų iškraipymas) | Loose belts, incorrect print speed, retraction settings, temperature. | Check and tighten belts. Adjust print speed. Calibrate retraction settings in slicer. Optimize hotend temperature. |
| Touchscreen Unresponsive/Incorrect Language | Software glitch, loose connection, corrupted firmware. | Restart the printer. Check display cable connections. Consider re-flashing firmware if issue persists (refer to Artillery support). |
Sudėtingesnių problemų atveju arba jei problema išlieka, kontaktinę informaciją rasite skyriuje „Garantija ir palaikymas“.
Specifikacijos
| Funkcija | Detalė |
|---|---|
| Modelis | Sidewinder X3 Pro |
| Prekės ženklas | Artilerija |
| Gaminio matmenys | 17.6 x 9.76 x 19.7 colio (447 x 248 x 500 mm) |
| Prekės svoris | 24 svaro (10.89 kg) |
| Medžiaga | Metalas |
| Spalva | Juoda |
| Maksimalus spausdinimo greitis | 300 mm/s |
| Automatinis niveliavimas | 49 taškų automatinis lovos išlyginimas |
| Ekstruderio tipas | Dviejų pavarų tiesioginės pavaros ekstruderis |
| Maksimali karštojo galo temperatūra | 300°C (All-Metal Hotend) |
| Sukurkite plokštę | PEI Magnetic Spring Steel |
| Max Hotbed Temperature | 100°C |
| Z-axis Design | Dual Z-axes & Dual Motors |
| Ryšys | SD Card, USB (assumed) |
| Vartotojo sąsaja | 4.3 colio visų spalvų jutiklinis ekranas |
10 pav.: Matmenų perimetrasview of the Artillery Sidewinder X3 Pro 3D Printer.
Garantija ir palaikymas
Artillery provides a one-year warranty for the Sidewinder X3 Pro 3D Printer. Additionally, 24-hour after-sales service is available to assist with any inquiries or issues you may encounter.
For technical support, warranty claims, or general inquiries, please contact Artillery customer service through their official channels. Refer to the product packaging or the official Artillery websvetainė, kurioje rasite naujausią kontaktinę informaciją.
Rekomenduojama išsaugoti pirkimo kvitą kaip pirkimo įrodymą garantijos tikslais.
