Lepro PR320019-2

Lepro LED priekinis žibintasamp Vartotojo vadovas

Modelis: PR320019-2

Produktas baigtasview

The Lepro LED Headlamp is a versatile and powerful lighting solution designed for various activities, from outdoor adventures like camping and hiking to practical tasks such as bike repairs and working in low-light conditions. This rechargeable headlamp features a super bright 230° COB wide beam and an adjustable spotlight, providing comprehensive illumination. Its motion sensor capability allows for hands-free operation, enhancing convenience and safety. Built with durability in mind, it is IP44 waterproof, shockproof, and dustproof, ensuring reliable performance in challenging environments.

Two Lepro LED Headlamps, one with a wide COB beam and one with a spotlight, next to charging cables.

Figure 1: Lepro LED Headlamp (2-Pack) with charging cables.

Pagrindinės savybės

Diagram showing 5 lighting modes of the Lepro headlamp: 230 degree flood light (High 350lm, Low 110lm, Motion Sensor) and 45 degree spot light (High 150lm, Low 60lm).

2 pav. Baigtaview of the 5 lighting modes available on the headlamp.

Sąranka

1. Pradinis įkrovimas

Before first use, fully charge your Lepro LED Headlamp. Connect the provided Type-C charging cable to the headlamp's USB port and plug the other end into a compatible USB power source (e.g., wall adapter, power bank, computer USB port). The charging indicator light will show charging status (e.g., red for charging, green for fully charged). A full charge typically takes about 4 hours.

Lepro headlamp connected to a power adapter via a USB-C cable, showing the charging indicator light.

Figure 3: Charging the Lepro LED Headlamp using the Type-C cable.

2. Galvos juostos reguliavimas

Galvaamp features an elastic and adjustable headband for a comfortable and secure fit. Adjust the strap to ensure the headlamp sits snugly on your head without being too tight. The lightweight design (93 grams) minimizes discomfort during prolonged use.

Naudojimo instrukcijos

Maitinimo mygtuko funkcijos

The main power button controls the various lighting modes:

Note: The COB floodlight and spotlight cannot be active simultaneously.

Judesio jutiklio režimas

Galvaamp is equipped with a motion sensor for hands-free operation. To activate this feature:

  1. Press the dedicated sensor button (usually located near the main power button). A small indicator light will illuminate to confirm motion sensor activation.
  2. Once activated, simply wave your hand in front of the headlamp to turn the COB light on or off. This is particularly useful when your hands are occupied or dirty.
Diagram showing the sensor button, power button, COB LED, XPE LED, USB port, motion sensor indicator, and charging indicator on the Lepro headlamp.

Figure 4: Product details highlighting the sensor and power buttons.

Adjusting Spotlight Angle

The spotlight feature allows for flexible adjustment of the beam angle. Manually tilt the spotlight module up or down to direct the light precisely where needed. This adjustable angle provides enhanced flexibility for various tasks and environments.

Image illustrating the adjustable angle of the spotlight on the Lepro headlamp, showing a 45-degree range of motion.

Figure 5: Adjustable spotlight for enhanced flexibility.

Video 1: Demonstrates the Lepro PR320019 Super Bright Headlamp with Motion Sensor, showcasing its various light modes and hands-free operation.

Priežiūra

A woman running in the rain at night, wearing the Lepro headlamp, demonstrating its IP44 waterproof rating.

6 pav.: Antgalisamp's IP44 waterproof and dustproof capabilities.

Trikčių šalinimas

ProblemaGalima priežastisSprendimas
Headlamp neįsijungia.Išsikrovusi baterija; netinkamai paspaustas maitinimo mygtukas.Įkraukite galvutęamp fully. Ensure the power button is pressed firmly.
Šviesos srautas silpnas.Low battery; Incorrect mode selected.Įkraukite galvutęamp. Cycle through modes to select a brighter setting.
Judesio jutiklis nereaguoja.Motion sensor not activated; Obstruction in front of sensor.Press the sensor button to activate. Ensure no objects are blocking the sensor.
Trumpas baterijos veikimo laikas.Battery not fully charged; Using high brightness modes excessively.Ensure full charge before use. Use lower brightness modes for extended runtime.

Specifikacijos

FunkcijaDetalė
Prekės ženklasLepro
Modelio numerisPR320019-2
Šviesos šaltinio tipasLED (COB & XPE)
Baltas ryškumas350 Lumens (COB High)
Šviesos kelio atstumas500 Feet (Spotlight)
Maitinimo šaltinisĮkraunamas USB
Baterijos talpa1200 mAh ličio polimerų baterija (pridedama)
Įkrovimo laikasapytiksliai 4 valandas
Vykdymo laikas4–10 valandų (priklausomai nuo režimo)
Atsparumo vandeniui lygisIP44 Atsparus vandeniui
Prekės svoris93 gramų (3.28 uncijos)
Gaminio matmenys2.95 "D x 1.5" P x 0.94" A
Įtraukti komponentaiĮkrovimo kabelis
SertifikataiCE, FCC, RoHS

Garantija ir palaikymas

The Lepro LED Headlamp ateina su a 1 metų ribota garantija. For warranty claims, technical support, or any product-related inquiries, please contact Lepro customer service through their official channels or visit the Lepro Store on Amazon.

You can find more information and contact details at the official Lepro Store: „Lepro“ „Amazon“ parduotuvė.

Susiję dokumentai - PR320019-2

Preview Lepro LED priekinis žibintasamp PR320017 Naudotojo vadovas ir instrukcijos
Išsamus „Lepro“ LED galvos žibintuvėlio naudotojo vadovasamp (Modelis PR320017). Sužinokite apie funkcijas, veikimą, įkrovimą, saugos gaires ir specifikacijas.
Preview Lepro LED priekinis žibintasamp Vartotojo vadovas ir saugos vadovas
Išsamus „Lepro“ LED galvos žibintuvėlio naudotojo vadovasamp (3200008 serijos modelis), įskaitant funkcijas, naudojimo instrukcijas, saugos priemones ir kontaktinę informaciją.
Preview Lepro 320014-2 LED priekinis žibintasamp Vartotojo vadovas ir specifikacijos
Išsamus „Lepro 320014-2“ LED priekinio žibinto vadovasamp, apimantys apšvietimo režimus, naudojimo instrukcijas, saugos priemones, technines specifikacijas ir atitiktį aplinkosaugos reikalavimams.
Preview Lepro LED stalas Lamp su Clamp - PR310005-DWW naudotojo vadovas
„Lepro LED Desk L“ naudotojo vadovasamp su Clamp (Modelis PR310005-DWW). Sužinokite apie jo savybes, specifikacijas, montavimą ir saugų naudojimą. Šis reguliuojamas stalasamp siūlo kelis ryškumo lygius ir spalvų temperatūras, maitinamas per USB ir yra skirtas naudoti patalpose.
Preview Lepro LED Camp„ing Lantern“ naudotojo vadovas (modelis 3300006)
„Lepro LED C“ naudotojo vadovasampŽibinto modelis 3300006. Ypatybės: 10 W LED, 3600 mAh baterija, išorinės baterijos funkcija ir keli šviesos režimai. Pateikiamos saugos instrukcijos, įkrovimo gairės ir informacija apie EEĮA perdirbimą.
Preview „Lepro OE1“ išmanusis LED grindų šviestuvasamp - Naudotojo vadovas ir sąrankos vadovas
Išsamus „Lepro OE1 Smart LED Floor L“ vadovasampSužinokite, kaip surinkti, prijungti per „Bluetooth“ ir „Wi-Fi“, valdyti naudojant „Lepro“ programėlę ir naudoti balso komandas. Pateikiamos specifikacijos ir saugos informacija.