Inkbird ITC-C216T Thermostat Instruction Manual

Įvadas

Thank you for choosing the Inkbird ITC-C216T Thermostat. This device is a versatile plug-and-play temperature controller designed for precise temperature management in a wide range of applications. It features three control modes: temperature, cycle time, and countdown, along with safety features like high/low temperature alarms and a child lock. This manual will guide you through the setup, operation, and maintenance of your thermostat to ensure optimal performance and safe use.

Saugos informacija

Ensure the thermostat is connected to a grounded power outlet.
Do not exceed the maximum load capacity of 10A, 220V AC (2200W).
Keep the device away from water, except for the IP67 rated probe.
Nebandykite patys ardyti ar taisyti įrenginio. Kilus problemų, kreipkitės į klientų aptarnavimo tarnybą.
Prieš valydami arba atlikdami techninę priežiūrą, visada ištraukite prietaisą iš elektros tinklo.

Produktas baigtasview

Komponentai

Detailed diagram of the Inkbird ITC-C216T thermostat, labeling its components: LCD, operational buttons, output, temperature probe, input, heating icon, cooling icon, timing icon, child lock, start temperature/time, and stop temperature/time.

Vaizdas: Detailed diagram of the Inkbird ITC-C216T thermostat with labeled components.

LCD with White Backlight: Displays current and set temperatures/times.
Operational Buttons: MODE, UP, SET, DOWN for navigation and setting adjustments.
Išvestis: Max 10A (2200W at 220Vac) for connecting heating or cooling devices.
Temperatūros zondas: 2m/79in long, IP67 waterproof for accurate temperature detection.
Įvestis: 100~240Vac 50/60Hz max 10A.
Šildymo piktograma: Indicates heating operation.
Cooling Icon: Indicates cooling operation.
Timing Icon: Indicates timing function is active.
Užrakto nuo vaikų piktograma: Rodo, kad įjungtas užraktas nuo vaikų.
PRADŽIA: Displays start temperature or time.
STOP: Displays stop temperature or time.

Pagrindinės savybės

Hand holding the Inkbird ITC-C216T thermostat, highlighting its backlit display, child lock, temperature calibration, memory function, and high/low temperature alarm features.

Vaizdas: The Inkbird ITC-C216T thermostat showcasing pagrindinės jo savybės.

Apšviestas LCD ekranas: Easy to read current and set values, even in low light.
Three Control Modes: Temperature, Cycle Time, and Countdown.
Platus temperatūros diapazonas: Controls temperatures from -40°C to 100°C.
Aukštos/žemos temperatūros signalizacijos: Customizable alarm values with an option to mute the buzzer.
Temperatūros kalibravimas: Allows for fine-tuning temperature readings.
Cooling Delay: Protects cooling equipment from short cycling.
Užraktas nuo vaikų: Apsaugo nuo atsitiktinio nustatymų pakeitimo.
Atminties funkcija: Retains all settings after a power interruption.
IP67 vandeniui atsparus zondas: Suitable for use in soil or submerged in water.

Sąranka

Išpakuoti: Carefully remove the thermostat and its components from the packaging.
Prijunkite: Insert the thermostat into a standard 220V AC grounded power outlet. The LCD display will light up.
Prijunkite įrenginį: Plug your heating or cooling device (e.g., heater, fan, refrigerator) into the output socket of the thermostat.
Padėties zondas: Place the waterproof temperature probe in the environment where temperature control is needed (e.g., terrarium, water, soil). Ensure the probe is securely positioned and not directly exposed to heating elements or strong air currents that could affect readings.

Veikimo režimai

The ITC-C216T thermostat supports three main control modes: Temperature Mode, Cycle Time Mode, and Countdown Mode. Please note that Temperature Mode and Timing functions cannot be used simultaneously.

1. Temperature Mode

Diagram illustrating the Inkbird ITC-C216T thermostat's cooling and heating capabilities, with temperature ranges from -40°C to 100°C.

Vaizdas: Visual representation of the thermostat's cooling and heating functions.

In Temperature Mode, the thermostat automatically controls your connected device (heater or cooler) to maintain a desired temperature range. The device will operate in heating or cooling mode based on your set START and STOP temperatures.

Paspauskite REŽIMAS button repeatedly until the display shows the temperature mode (usually indicated by a thermometer icon).
Paspauskite NUSTATYTI to enter setting mode. The START temperature will flash. Use the UP ir ŽEMYN buttons to adjust the desired START temperature.
Paspauskite NUSTATYTI again to confirm and move to the STOP temperature. Adjust the STOP temperature using UP ir ŽEMYN.
Paspauskite NUSTATYTI one more time to save the settings and exit.
If START temperature is lower than STOP temperature, the thermostat operates in šildymo režimas.
If START temperature is higher than STOP temperature, the thermostat operates in aušinimo režimas.

2. Cycle Time Mode (P01)

Illustration of the Inkbird ITC-C216T thermostat's Cycle Time Mode (P01) setting, showing a device turning on and off at set intervals.

Vaizdas: Diagram explaining the Cycle Time Mode (P01) operation.

This mode allows you to set a repeating ON/OFF cycle for your connected device. The time range is 0 to 99 hours and 59 minutes.

Paspauskite REŽIMAS until P01 is displayed.
Paspauskite NUSTATYTI. The ON time will flash. Adjust using UP/ŽEMYN.
Paspauskite NUSTATYTI. The OFF time will flash. Adjust using UP/ŽEMYN.
Paspauskite NUSTATYTI to save and exit. The device will now cycle ON and OFF according to your settings.

3. Countdown Mode (P02, P03, P04)

The Countdown Mode offers three sub-modes for specific timed operations:

P02: Countdown ON
Vaizdas: Diagram explaining the Countdown ON Mode (P02).
The device will turn ON after the set countdown period.
P03: Countdown OFF
Vaizdas: Diagram explaining the Countdown OFF Mode (P03).
The device will turn OFF after the set countdown period.
P04: Countdown ON & OFF
Vaizdas: Diagram explaining the Countdown ON&OFF Mode (P04).
The device will turn ON after the first countdown, then turn OFF after a second countdown.

To set any Countdown Mode:

Paspauskite REŽIMAS until P02, P03, or P04 is displayed.
Paspauskite NUSTATYTI. The countdown time(s) will flash. Adjust using UP/ŽEMYN.
Paspauskite NUSTATYTI išsaugoti ir išeiti.

Išplėstiniai nustatymai

Temperatūros kalibravimas (CA)

Image showing the Inkbird ITC-C216T thermostat displaying 'CA' for temperature calibration, with a gecko in the background.

Vaizdas: Thermostat screen showing temperature calibration setting.

If you find that the temperature reading is inaccurate compared to a known reference thermometer, you can calibrate the device:

Įjungę įrenginį, paspauskite ir palaikykite NUSTATYTI button for approximately 3 seconds to enter the parameter settings.
Naudokite UP/ŽEMYN buttons to navigate to the 'CA' (Calibration) setting.
Paspauskite NUSTATYTI, tada naudokite UP/ŽEMYN to adjust the calibration value (e.g., +0.5°C or -0.5°C).
Paspauskite NUSTATYTI patvirtinti ir išeiti.

Cooling Delay (Pt)

Image showing the Inkbird ITC-C216T thermostat displaying 'Pt' for refrigeration delay, with a refrigerator in the background.

Vaizdas: Thermostat screen showing refrigeration delay setting.

The cooling delay function prevents rapid cycling of cooling equipment, which can extend its lifespan.

Enter parameter settings (press and hold NUSTATYTI 3 sekundes).
Navigate to 'Pt' (Cooling Delay).
Adjust the delay time in minutes using UP/ŽEMYN.
Paspauskite NUSTATYTI patvirtinti ir išeiti.

High/Low Temperature Alarms (AH/AL)

Image showing the Inkbird ITC-C216T thermostat displaying 'AH' for high temperature alarm, with a mute icon, next to a lizard.

Vaizdas: Thermostat screen showing high temperature alarm with mute option.

Set custom high (AH) and low (AL) temperature alarm values. If the detected temperature exceeds these limits, an audible alarm will sound.

Enter parameter settings.
Navigate to 'AH' (High Alarm) or 'AL' (Low Alarm).
Adjust the alarm temperature using UP/ŽEMYN.
Paspauskite NUSTATYTI patvirtinti.
To mute the buzzer, press any button when the alarm sounds.

Užraktas nuo vaikų

Image showing the Inkbird ITC-C216T thermostat with a child lock icon displayed, indicating the safety feature is active.

Vaizdas: Thermostat displaying the child lock icon.

To prevent accidental changes to settings, activate the child lock:

Paspauskite ir palaikykite UP ir ŽEMYN buttons simultaneously for approximately 3 seconds. The child lock icon will appear on the display.
Repeat the action to unlock the device.

Atminties funkcija ir gamykliniai nustatymai

Atminties funkcija: The thermostat automatically saves all your settings. In case of a power outage, the device will resume operation with the last saved settings once power is restored.
Gamykliniai nustatymai: To restore the device to its default factory settings, consult the full user manual or contact Inkbird support for specific instructions.

Programos

Collage of images showing various applications for the Inkbird ITC-C216T thermostat, including reptile terrariums, fish tanks, home appliances, refrigeration, home brewing, and incubation.

Vaizdas: Diverse applications of the Inkbird ITC-C216T thermostat.

The Inkbird ITC-C216T thermostat is suitable for a wide range of temperature control needs, including but not limited to:

Reptile Terrariums and Aquariums
Greenhouses and Plant Propagation
Incubators for Eggs
Home Brewing and Fermentation
Controlling Freezers and Refrigerators
Managing Heating Mats and other Home Appliances

Specifikacijos

Funkcija	Specifikacija
Modelis	ITC-C216T
ttage	220V kintamoji srovė
Maksimali išvesties apkrova	10A / 2200W
Temperatūros valdymo diapazonas	-40°C iki 100°C (nuo -40°F iki 212°F)
Laiko diapazonas	0 to 99 hours 59 minutes
Zondo tipas	IP67 Atsparus vandeniui
Zondo ilgis	2 metro (79 colių)
Medžiaga	Akrilnitrilo butadieno stirenas (ABS)
Matmenys	8.8 x 8.9 x 13.7 cm
Svoris	250 g
Valdiklio tipas	Mygtukas

Trikčių šalinimas

If you encounter issues with your Inkbird ITC-C216T thermostat, please refer to the following common solutions:

Ekranas nedega: Įsitikinkite, kad termostatas yra tvirtai įjungtas į veikiantį maitinimo lizdą. Patikrinkite maitinimo šaltinį.
Netikslus temperatūros rodmuo: Verify the probe is correctly placed and not damaged. Perform a temperature calibration (refer to Advanced Settings).
Įrenginys neįsijungia / neišsijungia: Check if the connected heating/cooling device is functioning correctly. Ensure the thermostat is in the correct operating mode (Temperature, Cycle Time, or Countdown) and that settings are properly configured. Verify the child lock is not active.
Signalas skamba nuolat: Check the high/low alarm settings (AH/AL) and the current temperature. Adjust alarm values if necessary or mute the buzzer by pressing any button.
Nustatymai neišsaugomi: The device has a memory function. If settings are not retained, try a factory reset (consult full manual) or contact support.

For more detailed troubleshooting or persistent issues, please contact Inkbird customer support.

Priežiūra

Valymas: Disconnect the thermostat from power before cleaning. Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or immerse the main unit in water.
Zondų priežiūra: Regularly inspect the temperature probe for any signs of damage. Clean the probe gently if it accumulates debris, especially if used in water or soil.
Saugykla: Jei prietaisą ilgesnį laiką laikysite, įsitikinkite, kad jis švarus ir sausas. Laikykite vėsioje, sausoje vietoje, toliau nuo tiesioginių saulės spindulių.

Garantija ir palaikymas

Inkbird products are designed for reliability and performance. This product comes with a standard manufacturer's warranty. For specific warranty terms, registration, or technical support, please visit the official Inkbird websvetainėje arba susisiekite tiesiogiai su jų klientų aptarnavimo tarnyba.

Daugiau informacijos ir pagalbos išteklių galite rasti apsilankę Inkbird Store on Amazon.