Produktas baigtasview
The SCUF Envision Pro is engineered to provide PC gamers with an unparalleled controller experience. It features advanced customization options, ultra-fast connectivity, and responsive mechanical buttons for competitive gameplay.
Vaizdas: Priekinė ir galinė dalys view of the SCUF ENVISION PRO Wireless PC Gaming Controller in Steel Gray.
Kas yra dėžutėje
Image: Contents of the SCUF ENVISION PRO Controller box, including the controller, USB wireless receiver, USB-C cable, extra thumbsticks, SAX button blanks, inner paddle blanks, and paddle removal tool.
- SCUF ENVISION PRO Wireless PC Gaming Controller
- USB belaidis imtuvas
- Braided 1m USB-C Cable
- 1x Short Domed Thumbstick
- 1x Tall Domed Thumbstick
- 2x SAX Button Blanks
- 2x Inner Paddle Blanks
- Inner Paddle Removal Tool
- USB-A į USB-C adapterį
Sąranka
Initial Connection & iCUE Software
To begin, connect your SCUF Envision Pro controller to your PC using the provided USB-C cable. For the Envision Pro model, ensure the controller is in wired mode. The iCUE software is essential for initial setup and full customization.
- Download and install the latest version of the iCUE software from the official SCUF or Corsair websvetainę.
- Launch iCUE. Your controller should be detected automatically.
- Confirm your controller's firmware is up to date within the iCUE settings.
Image: Screenshot of the iCUE software interface showing the SCUF ENVISION PRO controller and customization options.
Valdiklio kalibravimas
Calibration ensures optimal performance of your controller's triggers and thumbsticks. It is recommended to perform calibration if you experience any input inconsistencies.
No official seller videos for calibration were found. Please refer to the iCUE software for detailed instructions.
- Connect the controller to your PC via USB-C cable. Ensure it is in wired mode.
- Open iCUE and select your SCUF Envision Pro controller.
- Navigate to the "Calibration" section in the sidebar.
- Toggle "Device Memory Mode" off.
- Click "Run Wizard" to start the calibration process.
- Follow the on-screen prompts to calibrate triggers and thumbsticks. Do not unplug or switch modes during this process.
- For triggers, ensure they are in full pull mode (not instant) before starting calibration.
- For thumbsticks, move them in cardinal directions (up, down, left, right) and allow them to rest for 2 seconds in the center before moving to the next direction.
- Once all steps are complete, click "Finish" to save the calibration data.
Valdiklio valdymas
The SCUF Envision Pro offers extensive customization to enhance your gaming experience.
Remappable Inputs
Image: Diagram highlighting the 11 additional remappable inputs on the SCUF ENVISION PRO controller.
- G-Keys: Five fully remappable G-Keys are located on the front of the controller, allowing for advanced macros and integration with Corsair iCUE.
- Galiniai irklai: Four rear, remappable paddles enable you to keep your thumbs on the sticks for faster reactions, crucial for competitive play.
- SAX Buttons: Two unique side-mounted SAX buttons provide additional configurability, designed for natural finger placement.
Vaizdas: Stambus planas view of the 5 programmable G-Keys on the SCUF ENVISION PRO controller.
Vaizdas: View of the remappable back paddles on the SCUF ENVISION PRO controller, labeled P1, P2, P3, P4.
Instant Triggers & Mechanical Switches
Image: Diagram illustrating the difference between an instant trigger and a regular trigger on the SCUF ENVISION PRO controller.
- Instant Triggers: Adjustable Instant Triggers allow you to quickly switch between mouse-like clicks for rapid firing and a full trigger range for precise control.
- OMRON Mechanical Switches: The OMRON mechanical ABXY and D-Pad buttons provide crisp and responsive clicks, similar to a mouse click, for instant activations.
Vaizdas: Stambus planas view of the ABXY buttons and D-Pad, highlighting the mouse-like mechanical switches.
iCUE Customization
iCUE software unlocks the full potential of your Envision Pro controller, allowing for deep personalization.
- Map fully configurable inputs to any PC shortcut.
- Customize your RGB Lighting Strip to match your gaming setup.
- Tailor your thumbstick and trigger response curves for optimal performance in different games.
Image: Screenshot showing the iCUE software interface for customizing thumbstick response curves.
Priežiūra
To ensure the longevity and optimal performance of your SCUF Envision Pro controller, follow these maintenance guidelines:
- Keep the controller clean by wiping it regularly with a dry, soft cloth. Avoid abrasive cleaners or solvents.
- Laikykite valdiklį vėsioje, sausoje vietoje, apsaugotoje nuo tiesioginių saulės spindulių ir ekstremalių temperatūrų.
- Handle the controller with care to prevent drops or impacts that could damage internal components.
- Periodically check for and install firmware updates via iCUE to ensure the best performance and compatibility.
Trikčių šalinimas
If you encounter issues with your SCUF Envision Pro controller, consider the following troubleshooting steps:
| problema | Galimas sprendimas |
|---|---|
| Controller not responding or input lag in wireless mode. | Ensure the USB Wireless Receiver is securely plugged into your PC. Try a different USB port. Minimize interference from other wireless devices. Ensure iCUE software is running and updated. |
| Firmware update fails or controller malfunctions after update attempt. | Ensure a stable wired connection during firmware updates. Do not unplug or switch modes. Restart iCUE and try again. If issues persist, perform a factory reset (refer to iCUE documentation for specific steps) or contact SCUF support. |
| Buttons or thumbsticks not registering inputs correctly. | Perform a controller calibration through the iCUE software (refer to the Setup section). Ensure no debris is obstructing button movement. |
| Controller randomly stops working or behaves erratically. | If wired, try unplugging and replugging the USB-C cable. If wireless, ensure the battery is charged and the wireless receiver is functioning correctly. Check iCUE for any reported conflicts or errors. |
Specifikacijos
- Modelio numeris: 601-178-03-102-NA
- Ryšys: Ultra-fast wired/wireless (Corsair SlipStream)
- Įėjimai: 11 additional remappable inputs (5 G-Keys, 2 SAX buttons, 4 rear paddles)
- Mygtukai: OMRON mechanical ABXY and D-Pad buttons
- Trigeriai: Adjustable Instant Triggers (switch between mouse-like clicks and full range)
- Suderinamumas: PC Only (Windows)
- Programinė įranga: iCUE Compatible (required for initial setup and customization)
- Matmenys: 6.5 x 4.23 x 2.5 colio
- Svoris: 10.05 uncijos
- Baterija: 1 ličio jonų baterija (pridedama)
- Išleidimo data: 25 m. sausio 2024 d
- Gamintojas: Korsaras
- Kilmės šalis: Kinija
Garantija ir palaikymas
SCUF provides a limited warranty for its products. For detailed warranty information, product support, and service requests, please visit the official SCUF websvetainėje arba susisiekite tiesiogiai su jų klientų aptarnavimo tarnyba. Išsaugokite pirkimo įrodymą garantiniams reikalavimams.
Official SCUF Store: SCUF Store on Amazon
