Įvadas
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Sharp XE-A207B Electronic Thermal Cash Register. Please read this manual thoroughly before using the device to ensure proper functionality and longevity. Keep this manual for future reference.
Figure 1: Sharp XE-A207B Electronic Thermal Cash Register. This image shows the complete unit, including the main register body, integrated thermal printer, customer display, operator display, and cash drawer.
1. Sąranka ir pradinė konfigūracija
1.1 Išpakavimas ir patikrinimas
Carefully remove all components from the packaging. Verify that all items listed in the packing list are present and undamaged. Retain the packaging for future transport or storage.
1.2 Maitinimo jungtis
- Įsitikinkite, kad kasos aparatas pastatytas ant stabilaus, lygaus paviršiaus.
- Prijunkite maitinimo laidą prie maitinimo įvesties prievado, esančio kasos aparato gale.
- Kitą maitinimo laido galą įkiškite į įžemintą elektros lizdą.
- Turn on the main power switch, typically located on the side or rear of the unit.
1.3 Popieriaus ritinio montavimas
- Open the printer cover by lifting the latch.
- Insert a new thermal paper roll, ensuring the paper feeds from the bottom and the leading edge is straight.
- Pull a small amount of paper past the cutting edge.
- Tvirtai uždarykite spausdintuvo dangtį, kol jis spragtelėdamas užsifiksuos.
1.4 Initial Date and Time Setting
Upon first power-on, the register may prompt for date and time settings. Follow the on-screen instructions or refer to the programming section for detailed steps on setting the correct date and time.
1.5 Cash Drawer Connection
Connect the cash drawer cable to the designated port on the rear of the cash register. The cash drawer will automatically open during specific transactions (e.g., cash sales, no-sale operations).
2. Naudojimo instrukcijos
2.1 Basic Sales Transaction
- Turn the Mode Switch to the REG (Register) position.
- Įveskite prekės kainą naudodami skaitmeninę klaviatūrą.
- Press the appropriate Department key (e.g., 1 SKYRIUS). Repeat for additional items.
- To finalize the sale, press the IŠ VISO raktas.
- Įveskite iš kliento gautą sumą.
- Paspauskite PINIGAI key. The register will print a receipt and display the change due.
2.2 Using PLU (Price Look-Up) Items
For items programmed with PLU codes:
- Turn the Mode Switch to REG.
- Įveskite PLU numerį.
- Paspauskite PLU key. The item's pre-programmed price will be registered.
- Proceed with the transaction as described in Section 2.1.
2.3 Voiding and Refunds
- Voiding an Item (before TOTAL): Enter the item price, press the Department key, then press the NIEKINIS raktas.
- Refund (after TOTAL): Turn the Mode Switch to GRĄŽINIMAS (if available) or REG ir naudokite GRĄŽINIMAS function. Enter the amount to be refunded and press the PINIGAI key. Consult the programming guide for specific refund procedures.
2.4 Daily Reports (X-Report and Z-Report)
- X-Report (Reading Report): Provides a current summary of sales without clearing totals. Turn the Mode Switch to X, tada paspauskite IŠ VISO raktas.
- Z-Report (Reset Report): Clears daily sales totals and prints a comprehensive summary. This report should be run at the end of each business day. Turn the Mode Switch to Z, tada paspauskite IŠ VISO raktas.
3. Priežiūra
3.1 Įrenginio valymas
Regular cleaning helps maintain the performance and appearance of your cash register.
- Prieš valydami atjunkite maitinimo laidą.
- Išorinius paviršius nuvalykite minkšta, damp audinys. Nenaudokite abrazyvinių valiklių ar tirpiklių.
- Use a soft brush or compressed air to remove dust and debris from the keypad and printer area.
- Clean the thermal print head periodically with a specialized thermal printer cleaning pen or isopropyl alcohol on a cotton swab. Allow to dry completely before use.
3.2 Popieriaus ritinio keitimas
Refer to Section 1.3 for detailed instructions on replacing the thermal paper roll.
4. Problemų sprendimas
This section addresses common issues you might encounter with your Sharp XE-A207B cash register. For problems not listed here, contact customer support.
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Registratorius neįsijungia. | Power cord disconnected; power switch off; power outlet issue. | Patikrinkite maitinimo laido jungtį; įsitikinkite, kad maitinimo jungiklis yra ĮJUNGTAS; išbandykite lizdą su kitu įrenginiu. |
| Spausdintuvas nespausdina arba spausdina blankiai. | Paper roll empty or incorrectly installed; non-thermal paper used; print head dirty. | Replace paper roll correctly (ensure thermal side is facing print head); use thermal paper only; clean print head. |
| Pinigų stalčius neatsidaro. | Drawer not connected; drawer lock engaged; mechanical obstruction. | Verify drawer cable connection; ensure drawer is unlocked; check for obstructions inside or around the drawer. |
| Ekrane rodomas klaidos pranešimas. | Operational error; programming error. | Refer to the specific error code in the full programming manual (if available) or restart the unit. |
5. Specifikacijos
The following are key specifications for the Sharp XE-A207B Electronic Thermal Cash Register:
- Modelis: XE-A207B
- Prekinis ženklas: Aštrus
- Spausdintuvo tipas: Terminis spausdintuvas
- Ekranas: Operator and Customer Displays
- Kasos stalčius: Integrated, secure cash drawer
- Ryšys: (Not specified in input, assume standard power and drawer connection)
- Pirmą kartą pasiekiama data: 7 m. lapkričio 2023 d
6. Garantija ir palaikymas
Informacijos apie garantiją ieškokite prie gaminio pridėtoje garantijos kortelėje arba apsilankykite oficialioje „Sharp“ svetainėje. website. For technical support, service, or spare parts availability, please contact your local Sharp authorized service center or the retailer from whom you purchased the product.
Pastaba: Spare part information is not available or provided directly within this product's specifications as per initial data.
