BWT Cosmy The Bot 250 robotinio baseino valiklio naudojimo instrukcija

1. Įvadas

This manual provides essential information for the safe and efficient operation, setup, and maintenance of your BWT Cosmy The Bot 250 Robotic Pool Cleaner. Please read this manual thoroughly before using the product and retain it for future reference.

The BWT Cosmy The Bot 250 is designed for effective pool cleaning, featuring powerful suction and efficient navigation. Its design facilitates easy handling, and the adjustable suction power allows for adaptation to various debris types.

Image 1.1: The BWT Cosmy The Bot 250 Robotic Pool Cleaner, shown with a smartphone displaying its remote control application.

2. Saugos informacija

Visada laikykitės šių saugos priemonių, kad sumažintumėte sužalojimų ar žalos riziką:

• Ensure the power supply is disconnected before performing any maintenance or cleaning on the unit.
• Do not operate the cleaner if the power cable is damaged. Contact qualified service personnel for repair.
• Kai veikia valymo įrenginys, laikykite vaikus ir naminius gyvūnus atokiau nuo baseino zonos.
• Valiklį naudokite tik vandens temperatūroje nuo 10 °C (50 °F) iki 35 °C (95 °F).
• Nenaudokite valymo įrenginio, jei baseine yra žmonių.
• Prieš pradėdami darbą, įsitikinkite, kad valymo įrenginys yra visiškai panardintas.
• Avoid lifting the cleaner by its cable. Always use the handle provided.

3. Gaminio komponentai

The BWT Cosmy The Bot 250 Robotic Pool Cleaner consists of the following main components:

• Pagrindinis blokas: The robotic cleaner body, housing the motor and filtration system.
• Filtro krepšelis: Removable basket for collecting debris.
• Šepečiai / Voleliai: Located on the underside for scrubbing pool surfaces.
• Floating Cable: Connects the cleaner to the power supply unit.
• Maitinimo blokas: Converts AC power to safe DC power for the cleaner.

3.1 vaizdas: priekis view of the cleaner, highlighting the cleaning brushes and intake area.

3.2 pav.: Apatinė pusė view of the cleaner, illustrating the tracks and brush system for pool surface navigation and cleaning.

3.3 pav.: Vidinis view of the cleaner, showing the gear and motor components responsible for its movement and cleaning action.

4. Sąranka

1. Išpakuokite valiklį: Carefully remove the cleaner and all accessories from the packaging.
2. Prijunkite plaukiojantį kabelį: Connect the floating cable to the power supply unit. Ensure the connection is secure.
3. Vieta baseine: Gently lower the cleaner into the pool. Allow it to sink to the bottom. Ensure there are no air bubbles trapped inside the unit.
4. Position Power Supply: Place the power supply unit at least 3.5 meters (11.5 feet) from the edge of the pool, ensuring it is not exposed to direct sunlight or excessive moisture.
5. Prijunkite: Prijunkite maitinimo bloką prie įžeminto elektros lizdo.

5. Naudojimo instrukcijos

1. Pradėti valymo ciklą: Press the power button on the power supply unit or use the remote control application (if applicable) to start the cleaning cycle. The cleaner will begin its programmed cleaning routine.
2. Sureguliuokite siurbimo galią: The Cosmy The Bot 250 features adjustable intake valves. To increase or decrease suction power, manually adjust the height of the intake valves located on the underside of the unit. This allows for optimized debris collection.
3. Monitoriaus valymas: The cleaner will navigate the pool floor and walls (depending on model features) to collect debris. Cleaning cycles are designed to be efficient and consume less energy.
4. End Cleaning Cycle: Once the cleaning cycle is complete, or if you wish to stop it manually, press the power button again.
5. Pašalinti iš baseino: Carefully pull the cleaner out of the water using its handle. Do not pull by the floating cable. Allow excess water to drain before placing it on a flat surface.

6. Priežiūra

Regular maintenance ensures optimal performance and extends the lifespan of your robotic pool cleaner.

6.1. Cleaning the Filter Basket

An indicator light will illuminate when the filter basket is full and requires cleaning.

1. Atjunkite maitinimą: Always unplug the power supply unit from the electrical outlet before cleaning.
2. Atidarykite filtro skyrių: Locate the filter access button/latch on the top of the cleaner and open the lid.
3. Pašalinti filtro krepšelį: Grasp the handle of the filter basket and lift it out of the cleaner.
4. Skalavimo filtras: Use a garden hose to thoroughly rinse the filter basket, removing all trapped debris. Ensure all mesh surfaces are clear.
5. Įterpti filtrą iš naujo: Place the clean filter basket back into the cleaner, ensuring it is properly seated.
6. Uždaryti dangtį: Close the filter compartment lid securely.

6.1 pav.: Viršus view of the cleaner with the filter compartment open, showing the filter basket inside.

Image 6.2: The filter basket removed from the cleaner, ready for rinsing.

6.2. Bendras valymas ir sandėliavimas

• After each use, rinse the cleaner with fresh water to remove any pool chemicals or debris.
• Inspect the brushes and tracks for any tangled debris (hair, leaves, etc.) and remove them.
• Valiklį laikykite vėsioje, sausoje vietoje, toliau nuo tiesioginių saulės spindulių ir ekstremalių temperatūrų.
• Coil the floating cable loosely to prevent kinks or damage.

7. Problemų sprendimas

If you encounter issues with your BWT Cosmy The Bot 250, refer to the following common problems and solutions:

Jei problema išlieka ir išbandžius šiuos sprendimus, susisiekite su klientų aptarnavimo tarnyba.

8. Specifikacijos

9. Garantija ir palaikymas

For warranty information and customer support, please refer to the documentation included with your purchase or contact the manufacturer directly:

Gamintojas: STEWARD GROUP, LLC

Please have your model number (Cosmy The Bot 250, RURN-NOYO-S2M70) and purchase date available when contacting support.