KAIWEETS VT100 bekontaktis kintamosios srovės tūrio matuoklistage Testerio vartotojo vadovas

1. Įvadas

The KAIWEETS VT100 is a non-contact AC voltage tester designed for safe and efficient electrical testing. It can detect AC voltage from 50V to 1000V, identify live and null wires, and locate breakpoints in wires. This manual provides essential information for the proper and safe use of your device.

2. Saugos informacija

Always prioritize safety when working with electricity. Read and understand all safety warnings before using this device.

• IEC Rated Safety: This device is IEC rated CAT III 1000V and CAT IV 600V, meeting CE requirements. It is safely double insulated.
• Aukštas tomastage įspėjimas: An alert will activate for voltages above 90V, indicated by the screen turning red and a safety symbol illuminating.
• Garsiniai ir vaizdiniai pavojaus signalai: The tester provides multiple alarms through sound and light. When voltage is detected, the tip emits a red light and beeps. The frequency of beeps increases with higher sensed voltagarba arčiau tūriotage šaltinis.
• Non-Contact Operation: Designed for non-contact AC voltage detection, minimizing direct exposure to live circuits.
• Asmeninės apsaugos priemonės: Always wear appropriate personal protective equipment (PPE), such as insulated gloves and safety glasses, when performing electrical work.

3. Produktas baigtasview

Familiarize yourself with the components of your KAIWEETS VT100 voltage testeris:

Image: KAIWEETS VT100 with labels indicating the Battery Cover, Power/Light Button, Power Indicator, Signal Indicator, Flashlight, and Probe (NCV Sensor Head).

• Baterijos dangtelis: Located at the rear, for battery access.
• Maitinimo / šviesos mygtukas: Controls power and flashlight function.
• Maitinimo indikatorius: Illuminates when the device is on.
• Signalo indikatorius: Flashes to indicate voltage aptikimas.
• Žibintuvėlis: Suteikia apšvietimą tamsiose vietose.
• Probe (NCV Sensor Head): The tip used for non-contact voltage aptikimas.

4. Sąranka

4.1 Akumuliatoriaus įdėjimas

1. Twist and remove the battery cover at the rear of the tester.
2. Įdėkite dvi 1.5 V AAA baterijas, užtikrindami teisingą poliškumą (+/-).
3. Uždėkite akumuliatoriaus dangtelį ir pasukite, kad jį pritvirtintumėte.

The device includes two AAA batteries for immediate use.

5. Naudojimo instrukcijos

5.1 Maitinimo įjungimas/išjungimas

Press the Power/Light button to turn the tester on. The power indicator will illuminate. Press and hold the button to turn it off. The device features an automatic power-off function after 5 minutes of inactivity or no signal detection to conserve battery life.

5.2 Nekontaktinis ttage (NCV) aptikimas

The VT100 uses an NCV inductive probe to detect AC voltage be tiesioginio kontakto.

1. Ensure the tester is powered on.
2. Place the tip of the tester near a terminal strip, outlet, or supply cord.
3. Jei ttage is present, the tip will glow red, and the pen will emit an audible beep. The intensity of the light and frequency of the beep indicate the strength of the detected voltage.

Image: The KAIWEETS VT100 indicating a Null Wire with slow beeps and slow red light flashes, and a Live Wire with quick beeps and quick red light flashes.

5.3 Live/Null Wire Identification

The tester can automatically distinguish between live and neutral (null) wires based on signal strength.

• The live wire will produce stronger signals, resulting in a faster beep rate and brighter red light.
• The null wire will produce weaker or no signals.

5.4 Wire Breakpoint Finder

The VT100 can assist in locating breakpoints in insulated wires.

1. Move the tester along the length of the insulated wire.
2. The tester will indicate voltage up to the point of the break. The absence of a signal beyond a certain point suggests a breakpoint.

Image: The KAIWEETS VT100 being used to test a cable for breakpoints, showing detection up to a certain point.

5.5 LED žibintuvėlis

Press the Power/Light button briefly to toggle the LED flashlight on or off. This feature is useful for working in dimly lit environments.

Image: The KAIWEETS VT100's LED flashlight illuminating a dark electrical panel, demonstrating its utility in low-light conditions.

5.6 Produkto vaizdo demonstracija

Watch this video for a visual guide on using the KAIWEETS VT100 Non-Contact Voltage testeris:

6. Priežiūra

6.1 Valymas

Wipe the device with a dry, clean cloth. Do not use abrasive cleaners or solvents that could damage the casing arba vidiniai komponentai.

6.2 Akumuliatoriaus keitimas

When the low-power indicator activates (battery voltage below 2.5V), replace the batteries promptly to ensure accurate readings and proper functionality. Refer to Section 4.1 for battery installation instructions.

6.3 Saugykla

Store the tester in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, remove the batteries to prevent leakage.

7. Problemų sprendimas

• Įrenginys neįsijungia: Patikrinkite baterijų įdėjimą ir įsitikinkite, kad jos nėra išsikrovusios. Jei reikia, pakeiskite.
• Nenuoseklūs rodmenys: Ensure the probe is clean and free from obstructions. Test in an area with known voltage, kad patikrintumėte funkcionalumą.
• Mažos galios indikatorius: If the low-power indicator is active, replace the AAA batteries immediately.
• Automatinis išjungimas: The device is designed to power off after 5 minutes of no operation or signal detection. This is normal behavior to save battery.

8. Specifikacijos

9. Garantija ir palaikymas

KAIWEETS provides a 36-month after-sale service for this product. If you have any concerns, questions, or require technical assistance, please do not hesitate to contact our customer support team. For the most up-to-date contact information, please refer to the KAIWEETS official websvetainėje arba kontaktiniais duomenimis, pateiktais perkant.