1. Įvadas
This manual provides essential instructions for the assembly, operation, and maintenance of your tectake Greenhouse (Model: 250x185x195 cm With Base). Please read this manual thoroughly before installation and use to ensure safe and efficient operation. This greenhouse is designed to provide an optimal environment for cultivating plants, offering protection from various weather conditions.
2. Saugos instrukcijos
- Atsargiai: This product consists of heavy and sharp materials. Handle all parts with care during unpacking and assembly to prevent injury.
- Assistance Required: Due to the size and weight of the greenhouse, assembly requires at least two people. Do not attempt to assemble alone.
- Tik lauke: This greenhouse is intended for outdoor use. Select a suitable location that can withstand various weather conditions.
- Inkaravimas: The greenhouse must be adequately anchored to the ground. If using a base, ensure it is properly concreted into the ground for sufficient stability. The greenhouse structure must be securely fixed to the foundation frame.
- Oro sąlygos: Ensure the greenhouse is adapted to local weather conditions. In areas prone to strong winds or heavy snow, additional reinforcement may be necessary.
- Vėdinimas: Ensure proper ventilation to prevent excessive heat buildup and humidity, which can harm plants. Utilize the roof window and sliding door for air circulation.
3. Pakuotės turinys
Prieš pradėdami surinkimą, patikrinkite, ar yra visi toliau išvardyti komponentai ir ar jie nepažeisti. Jei trūksta kokių nors dalių arba jos pažeistos, susisiekite su klientų aptarnavimo tarnyba.
- Anodized Aluminum Frame Components
- Polycarbonate Panels (4mm thick, UV-resistant)
- Stumdomų durų surinkimas
- Roof Window Assembly
- Reinforced Base Frame
- Fasteners and Hardware
- Surinkimo instrukcijos (šis vadovas)

Image: Detailed diagram of greenhouse components and dimensions.
4. Sąranka ir surinkimas
Assembly can be complex. Follow the provided diagrams and instructions carefully. It is highly recommended to have at least two people for assembly.
4.1 Svetainės paruošimas
- Montavimui pasirinkite lygų, gerai drenuojamą plotą.
- Išvalykite plotą nuo bet kokių šiukšlių, akmenų ar augmenijos.
- Ensure the site allows for proper anchoring and drainage.
4.2 Pagrindo įrengimas
The reinforced base provides crucial stability. It is recommended to concrete the base into the ground for maximum stability, especially in windy areas.
- Surinkite pagrindinį rėmą pagal schemas.
- Position the assembled base on the prepared site.
- Securely anchor the base to the ground, preferably by concreting it.

Image: Illustration of the reinforced base frame for stability.
4.3 Rėmo surinkimas
- Connect the aluminum frame components as shown in the assembly diagrams. Pay close attention to the orientation of each piece.
- Use the provided fasteners to secure all connections. Do not overtighten until the entire frame is loosely assembled.
- Once the main frame is upright, attach it securely to the installed base frame.

Vaizdas: Interjeras view showing the robust aluminum frame structure.
4.4 Skydelio įrengimas
- Carefully insert the polycarbonate panels into the designated frame channels. Ensure the UV-protected side faces outwards.
- Secure the panels using the clips or sealing strips provided.
4.5 Durų ir langų montavimas
- Assemble the sliding door and install it into its track. Ensure it slides smoothly.
- Attach the roof window assembly. Test its opening and closing mechanism.

Image: Detail of the roof window mechanism and frame connections.
4.6 Final Tightening
Kai visi komponentai bus savo vietose, sistemingai priveržkite visus tvirtinimo elementus. Neperveržkite, bet įsitikinkite, kad visos jungtys yra tvirtos ir saugios.
5. Naudojimo instrukcijos
5.1 Vėdinimas
Proper ventilation is crucial for plant health. Use the roof window and sliding door to regulate temperature and humidity inside the greenhouse.
- Open the roof window during warm periods to release excess heat.
- Partially open the sliding door for additional airflow, especially on hot days.
- Monitor internal temperature and humidity with a thermometer/hygrometer.
5.2 Augalų išdėstymas
Arrange plants to maximize light exposure and allow for air circulation. Taller plants can be placed towards the center or back, utilizing the greenhouse's height.

Image: A person tending to plants inside the greenhouse, demonstrating ample erdvės.
5.3 Winter Protection
The polycarbonate panels provide insulation against cold and frost. For extreme winter conditions, consider adding supplementary heating or insulation layers.
6. Priežiūra
- Valymas: Reguliariai valykite polikarbonato plokštes švelniu muilu ir vandeniu, kad užtikrintumėte maksimalų šviesos pralaidumą. Venkite abrazyvinių valiklių ar įrankių, kurie gali subraižyti plokštes.
- Rėmo apžiūra: Periodically inspect the aluminum frame for any signs of corrosion, loose fasteners, or damage. Tighten any loose bolts and replace damaged parts as needed.
- Skydelio vientisumas: Check panels for cracks or gaps. Seal any openings to maintain insulation and prevent drafts.
- Door and Window Tracks: Keep door and window tracks clear of dirt and debris to ensure smooth operation. Lubricate if necessary.
- Inkaravimas: Patikrinkite, ar šiltnamis tvirtai pritvirtintas, ypač po stipraus vėjo ar gausaus lietaus.

Image: Illustration of the greenhouse's weather resistance, highlighting its durability.
7. Problemų sprendimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Sunkumai surinkimo metu | Complex instructions, missing parts, incorrect orientation | Review diagrams carefully. Ensure all parts are present. Seek assistance from another person. Contact customer support for clarification or missing parts. |
| Greenhouse feels unstable | Insufficient anchoring, loose fasteners, uneven ground | Ensure the base is securely anchored, preferably concreted. Tighten all frame fasteners. Verify the ground is level. |
| Poor ventilation / High humidity | Roof window or door not open sufficiently | Open the roof window and/or sliding door to increase airflow. Consider additional ventilation options if needed. |
| Vandens nutekėjimas | Gaps in panel installation, damaged seals | Inspect panel edges and seals. Re-seat panels or apply silicone sealant where necessary. |
8. Specifikacijos
| Funkcija | Detalė |
|---|---|
| Modelis | 250x185x195 cm With Base |
| Bendri matmenys (I x P x A) | 2.5 x 1.85 x 1.95 metrai |
| Svoris | apytiksliai 33.1 kg |
| Rėmo medžiaga | Anoduotas aliuminis |
| Covering Material | 4mm UV-resistant Polycarbonate (PC) |
| Durų skaičius | 1 (Stumdomos durys) |
| Ventiliacijos angų skaičius | 1 (Roof Window) |
| Į komplektą įeina bazė | Yes, Reinforced Base |
9. Garantija ir palaikymas
Your tectake Greenhouse is covered by standard legal guarantees. For specific warranty details, please refer to the terms and conditions provided at the point of purchase or contact the seller directly.
- Grąžinimai: A 30-day return policy is typically offered. Please check your purchase details for exact terms.
- Gamintojas: TecTake GmbH
- Pardavėjas: „Made4Home“ SAS
- Klientų aptarnavimas: For any questions, missing parts, or technical assistance, please contact the specialized customer support of Made4Home SAS. Refer to your purchase documentation for contact information.