Proster 2-in-1 Moisture Meter (Model PST243-US) Instruction Manual
Įvadas
This manual provides comprehensive instructions for the safe and effective use of your Proster 2-in-1 Moisture Meter. This device is designed to accurately measure moisture content in various materials, including wood and building materials, using both pin and pinless measurement modes. It also features ambient temperature measurement and an LCD backlight for clear readings.
Saugos informacija
- Visada elkitės su prietaisu atsargiai.
- Laikykite prietaisą atokiau nuo vandens ir didelės drėgmės, kad išvengtumėte pažeidimų.
- Nebandykite ardyti ar modifikuoti įrenginio. Remontą turėtų atlikti tik kvalifikuoti specialistai.
- When using the pin mode, be cautious of the sharp pins to avoid injury. Keep the protective cap on when not in use.
- Išmeskite baterijas laikydamiesi vietinių taisyklių.
Produkto savybės
- Dvigubi matavimo režimai: Offers both pin and pinless (non-invasive) measurement for versatility. The pinless mode prevents damage to surfaces, ideal for finished wood and delicate materials. The pin mode provides faster response and higher accuracy for various wood types and building materials.
- Didelis tikslumas:
- Pin Mode: Wood moisture 6-60% (±2% accuracy); Building materials 0-33% (±2% accuracy).
- Pinless Mode: Wood moisture 0-60% (±4% accuracy); Building materials 0-33% (relative readings).
- Aplinkos temperatūros matavimas: Measures ambient temperature from 0°C to 40°C (32°F to 104°F) with an accuracy of ±2°C/±4°F.
- Aiškus skaitomumas: Features a color backlit LCD display, data hold function, and a signal bar display for easy interpretation of results.
- Platus pritaikymas: Suitable for measuring moisture in wood, concrete, cement, plaster, and other building materials.
- Automatinis išjungimas: The device automatically shuts off after 5 minutes of inactivity to conserve battery life.
Pakuotės turinys
Verify that all items listed below are present and in good condition upon opening the package.
Image: Contents of the Proster 2-in-1 Moisture Meter package, showing the meter, a 9V battery, a black carrying pouch, and the user manual.
- Proster 2-in-1 Moisture Meter (Model PST243-US)
- 9V baterija
- Apsauginis kaiščių dangtelis
- Nešiojimo maišelis
- Vartotojo vadovas
Sąranka
Akumuliatoriaus montavimas
- Suraskite akumuliatoriaus skyrių įrenginio gale.
- Atidarykite akumuliatoriaus skyriaus dangtelį.
- Įdėkite pridedamą 9 V bateriją, užtikrindami teisingą poliškumą (+/-).
- Saugiai uždarykite akumuliatoriaus skyriaus dangtelį.
Vaizdas: Išsamus view of the moisture meter, highlighting the protective cap, pins, pinless sensor, and battery case.
Naudojimo instrukcijos
Maitinimo įjungimas/išjungimas
Paspauskite Power On/Off / Wood Density Button (labeled with a power symbol and "DENSITY") to turn the device on or off.
Selecting Measurement Mode (Pin / Pinless)
The meter offers two measurement modes: Pin Measurement Mode and Pinless Measurement Mode.
Image: The moisture meter demonstrating its two measurement modes: Pin Measurement Mode (top) for direct contact and Pinless Measurement Mode (bottom) for non-invasive scanning.
- Paspauskite Pin/Pinless Mode Switch Button (labeled "MODE") to toggle between the two modes.
- In Pin Measurement Mode, remove the protective cap and gently insert the pins into the material to be measured.
- In Pinless Measurement Mode, place the back of the device (where the pinless sensor is located) flat against the surface of the material.
Selecting Material Type (Wood / Building Material)
Paspauskite Wood/Building Material Switch Button (labeled "BLD") to select between wood and building material measurement. The display will indicate the selected material type.
Image: The moisture meter displaying measurements for wood (left) and building material (right), showing the different measurement ranges and accuracies for each.
Wood Density Grades
The meter supports 9 different wood density grades for more accurate wood moisture measurements. Press the Wood Density Button (same as Power On/Off button) to cycle through the density grades.
Temperature Measurement (°C / °F)
The device measures ambient temperature. Press the Data Hold and °C/°F Switch Button (labeled "HOLD °C/°F") to switch between Celsius and Fahrenheit units for temperature display.
Duomenų sulaikymo funkcija
Norėdami sustabdyti dabartinį matavimą ekrane, paspauskite Data Hold and °C/°F Switch Button (labeled "HOLD °C/°F"). Press it again to release the hold function.
Signalizacijos signalas
The device features an audible buzzer alarm to indicate high moisture levels.
Image: The moisture meter indicating a buzzer alarm when moisture measurements exceed 20% in building material mode (left) and 16% in wood mode (right).
- In Building Material Mode, the alarm sounds when measurements exceed 20%.
- In Wood Mode, the alarm sounds when measurements exceed 16%.
Matavimo diapazonai ir tikslumas
| Parametras | Diapazonas | Tikslumas | Rezoliucija |
|---|---|---|---|
| Wood Moisture (Pin Mode) | 6 % – 60 % | ±2 % | 0.1 % |
| Building Material Moisture (Pin Mode) | 0 % – 33 % | ±2 % | 0.1 % |
| Wood Moisture (Pinless Mode) | 0 % – 60 % | ±4 % | 0.1 % |
| Building Material Moisture (Pinless Mode) | 0 % – 33 % | Santykiniai skaitymai | 0.1 % |
| Aplinkos temperatūra | 0–40 °C (32–104 °F) | ±2°C / ±4°F | 0.1°C |
Priežiūra
- Valymas: Prietaisą valykite minkštu, sausu skudurėliu. Nenaudokite abrazyvinių valiklių ar tirpiklių.
- Saugykla: When not in use for extended periods, remove the battery to prevent leakage. Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the protective cap is on the pins.
- Baterijos keitimas: Pakeiskite 9 V bateriją, kai ekrane pasirodys išsikrovusios baterijos indikatorius.
Trikčių šalinimas
- Įrenginys neįsijungia:
- Check if the 9V battery is installed correctly with the correct polarity. Ensure the battery has sufficient charge. Replace the battery if necessary.
- Netikslūs rodmenys:
- Ensure the correct measurement mode (pin or pinless) and material type (wood or building material) are selected. For wood, verify the correct density grade is set. Ensure good contact with the material surface, especially in pinless mode.
- Ekranas blankus arba neįskaitomas:
- The battery might be low. Replace the 9V battery. Ensure the backlight is enabled if available.
Specifikacijos
| Funkcija | Detalė |
|---|---|
| Modelio numeris | PST243-US |
| Maitinimo šaltinis | 1 x 9 V baterija (pridedama) |
| Darbinė temperatūra | nuo 0°C iki 40°C (32°F iki 104°F) |
| Darbinė drėgmė | 0-90 % santykinis drėgnis |
| Laikymo temperatūra | nuo 0°C iki 40°C (32°F iki 104°F) |
| Automatinis išjungimas | Po 5 minučių neveikimo |
| Ekrano tipas | LCD su foniniu apšvietimu |
| Svoris | 167.2 gramų |
| Matmenys (paketas) | 21.9 x 8.9 x 5.3 cm |
Garantija ir palaikymas
For warranty information and technical support, please refer to the contact details provided with your purchase or visit the official Proster websvetainėje. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą bet kokiems garantiniams prašymams.
