goobay 65586 LED Transformer 700 mA/20 W Constant Current Driver Instruction Manual

1. Įvadas

This manual provides essential information for the safe and efficient installation and operation of your goobay 65586 LED Transformer. This compact LED driver is designed to supply constant current (CC) to LED lamps, effectively preventing flickering and heat-related wear of connected LEDs. Unlike constant voltage (CV) transformers, constant current drivers enable consistent light quality and brightness and ensure uniform current across all LEDs, even in series connections.

Prieš montuodami atidžiai perskaitykite šį vadovą ir išsaugokite jį ateičiai.

2. Saugos instrukcijos

ĮSPĖJIMAS: Electrical installation should only be performed by qualified personnel. Incorrect installation can lead to electric shock, fire, or damage to the product.

• Prieš bet kokius montavimo ar techninės priežiūros darbus įsitikinkite, kad maitinimo šaltinis yra atjungtas.
• Do not exceed the maximum rated power of 20 W.
• This transformer is designed for indoor use only (IP20). Do not expose to moisture or direct water.
• Ensure proper ventilation around the transformer to prevent overheating. The flat design ensures low heat generation, but adequate airflow is still important.
• The product is approved for installation in furniture.
• This LED transformer is nėra pritemdomas.
• Maintain safe electronic isolation according to protection class II.

3. Produktas baigtasview

The goobay 65586 LED Transformer is a compact constant current driver. It features screw terminals for quick and easy installation.

3.1 paveikslas: viršuje view of the goobay 65586 LED Transformer. This image shows the compact white casing with green end caps, displaying product labels and specifications.

Figure 3.2: The goobay 65586 LED Transformer with its protective green end caps removed, revealing the input and output screw terminals for electrical connections.

3.1 Pagrindinės funkcijos:

• Nuolatinė srovės išvestis: 700 mA for stable LED performance.
• Galia: Maximum 20 W.
• Įvesties tomastage: 220-240 V AC.
• Išėjimas ttage: 17–28.5 V nuolatinė srovė.
• Kompaktiškas dizainas: Butas profile for discreet installation, including in furniture.
• Lengvas montavimas: Integrated screw terminals.
• Sauga: Protection Class II, SELV compliant.

4. Sąranka ir diegimas

Follow these steps for safe and correct installation of the LED transformer.

1. Atjunkite maitinimą: Before starting any electrical work, ensure the main power supply to the circuit is switched off at the breaker.
2. Paruoškite laidus: Strip approximately 5-7 mm of insulation from the ends of your input (AC) and output (DC) wires.
3. Connect Input (PRI):
   

   4.1 pav. Iš arti view of the orange input (PRI) screw terminals on the goobay 65586 LED Transformer, labeled 'N' and 'L' for neutral and live connections.

   • Locate the input terminals labeled "PRI" (Primary) or "220-240 V" on the transformer.
   • Connect the live (L) wire from your AC mains to the 'L' terminal and the neutral (N) wire to the 'N' terminal. Secure the wires firmly using the screw terminals.
4. Connect Output (SEC):
   

   4.2 pav. Iš arti view of the green output (SEC) screw terminals on the goobay 65586 LED Transformer, labeled '+' and '-' for positive and negative DC connections to the LEDs.
   • Locate the output terminals labeled "SEC" (Secondary) or "17-28.5 V" on the transformer.
   • Connect the positive (+) wire from your LED fixture(s) to the '+' terminal and the negative (-) wire to the '-' terminal. This transformer is designed for series connection of LEDs. Ensure the total voltage drop of your LED series falls within the 17-28.5 V range and the total power does not exceed 20 W.
   • Secure the wires firmly using the screw terminals.
5. Montavimas: The transformer's compact and flat design allows for discreet mounting, such as behind cabinets or within furniture. Ensure the mounting location allows for adequate air circulation.
6. Atkurti maitinimą: Kai visos jungtys yra patikimos ir saugios, atkurkite elektros tiekimą į grandinę.

4.3 paveikslas: buvęsample of the goobay LED transformer discreetly installed within a closet lighting setup, demonstrating its suitability for furniture integration.

5. Naudojimo instrukcijos

Once correctly installed and powered, the goobay 65586 LED Transformer will automatically provide a constant current to the connected LED lights. No further user interaction is required for its basic operation.

• The transformer ensures a stable and flicker-free light output from your LEDs.
• This model is a constant current driver and is specifically designed for series connection of LEDs.
• As noted in the safety instructions, this transformer is nėra pritemdomas.

6. Priežiūra

The goobay 65586 LED Transformer requires minimal maintenance.

• Valymas: Prieš valydami atjunkite maitinimą. Išorę nuvalykite sausa, minkšta šluoste. Nenaudokite skystų valiklių ar tirpiklių.
• Patikra: Periodically check the wiring connections to ensure they remain secure. Inspect the casing for any signs of damage or overheating.
• Remontas: Do not attempt to open or repair the transformer yourself. Refer all servicing to qualified personnel.

7. Problemų sprendimas

If you encounter issues with your LED lighting system, refer to the following common troubleshooting steps:

8. Specifikacijos

Figure 8.1: Detailed dimensions of the goobay 65586 LED Transformer, showing its length (102.6 mm), width (35.5 mm), and height (16.1 mm), along with its weight (56g).

9. Garantija ir palaikymas

For warranty information and technical support, please refer to the documentation provided with your purchase or contact goobay customer service. Keep your proof of purchase for warranty claims.

Manufacturer: Wentronic GmbH

Contact information can typically be found on the product packaging or the official goobay websvetainę.