1. Įvadas
The BSEED V098-120V Adjustable Voltage Surge Protector Outlet is designed to safeguard your electronic devices and home appliances from damage caused by voltage svyravimai, galios išėjimastages, and electrical surges. Featuring an LED digital display and adjustable voltage settings, this compact device provides reliable protection and peace of mind.
2. Saugos informacija
Prieš naudodami šį gaminį, perskaitykite ir supraskite visas saugos instrukcijas. Nesilaikant šių instrukcijų, gali kilti elektros smūgis, gaisras arba sunkūs sužalojimai.
- Neardykite ir nemodifikuokite įrenginio.
- Įsitikinkite, kad prietaisas naudojamas neviršijant nurodyto tūriotage (120V), current (15A), and power (1800W) limits.
- Saugokite prietaisą nuo vandens ar per didelės drėgmės.
- Do not use if the device or its connected appliance appears damaged.
- This product is made from premium flame-retardant ABS material, meeting UL94-V-1.0 grade test standards for enhanced safety.
3. Produktas baigtasview
The BSEED V098-120V surge protector features a compact design with an integrated LED display and control buttons for easy operation.
Figure 3.1: Two BSEED V098-120V Surge Protector Outlets.
3.2 pav. Išsamus view of the surge protector's LED display and control buttons. The display shows current voltage, and the side buttons are used for setting high voltage apsauga, mažo tūriotage protection, and delay time.
Pagrindinės funkcijos:
- Reguliuojamas tūristage Apsauga: Set custom high and low voltage slenksčiai.
- Vėlavimo laiko nustatymas: Configure a delay before power restoration after a voltage renginys.
- LED skaitmeninis ekranas: Clearly shows current operating status and settings.
- Virš/po totage Apsauga: Automatically cuts off power to prevent appliance damage.
- Kompaktiškas dizainas: Wall tap adapter design saves space and does not block other outlets.
Figure 3.3: The compact size of the surge protector, measuring approximately 3.91 inches in height and 2.11 inches in width, designed to not obstruct adjacent outlets.
4. Sąranka
- Išpakuoti: Atsargiai išimkite viršįtampių apsaugą iš pakuotės.
- Patikrinti: Patikrinkite, ar įrenginyje nėra matomų pažeidimų. Nenaudokite, jei pažeistas.
- Prijunkite: Insert the surge protector directly into a standard 120V wall outlet. The LED display will illuminate, showing the current voltage.
- Prijunkite prietaisą: Plug your appliance into the surge protector's outlet. Ensure the appliance's power consumption does not exceed 1800W (15A at 120V).
5. Naudojimo instrukcijos
The BSEED V098-120V allows you to adjust its high voltage apsauga, mažo tūriotage protection, and power-on delay settings.
Parametrų reguliavimas:
- With the device plugged in and powered on, press and hold the central „NUSTATYTA“ button on the side for approximately 2 seconds until the display changes to show an adjustable parameter (e.g., 'H' for high voltagir).
- Naudokite „+“ ir '-' buttons (located above and below the 'SET' button) to increase or decrease the displayed value.
- Paspauskite „NUSTATYTA“ button briefly to cycle through the adjustable parameters:
- H (High Voltage apsauga): Set the maximum acceptable voltage. Jei ttage exceeds this, power will be cut.
- L (Low Voltage apsauga): Set the minimum acceptable voltage. Jei ttage drops below this, power will be cut.
- S (Delay Time): Set the delay in seconds before power is restored after a voltage event. This protects appliances like refrigerators from rapid power cycling.
- Once you have set all desired parameters, stop pressing buttons. The device will automatically save the settings and return to displaying the current voltage after a few seconds of inactivity.
Video 5.1: Demonstration on how to adjust the voltage protection parameters and delay time on the BSEED V098-120V surge protector.
6. Priežiūra
The BSEED V098-120V surge protector requires minimal maintenance.
- Laikykite įrenginį švarų ir be dulkių. Valymui naudokite sausą, minkštą šluostę.
- Nenaudokite skystų valiklių ar abrazyvinių medžiagų.
- Užtikrinkite tinkamą vėdinimą aplink įrenginį.
7. Problemų sprendimas
If you encounter issues with your BSEED V098-120V surge protector, refer to the table below for common problems and solutions.
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Įrenginys neįsijungia. | No power from wall outlet; device malfunction. | Check wall outlet with another device. If still no power, contact customer support. |
| Appliance not receiving power. | ttage outside set limits; delay time active. | Check the LED display for current voltage. Wait for the delay time to complete. Adjust voltage apribojimai, jei reikia. |
| Ekrane rodomas klaidos kodas. | Vidinė klaida. | Unplug the device for 30 seconds and plug it back in. If the error persists, contact customer support. |
8. Specifikacijos
- Modelis: V098-120V
- Prekinis ženklas: BSEED
- ttage: 120 voltų
- Bendras maitinimo lizdas: 1
- Dabartinis: 15 Amps (maks.)
- Galia: 1800 vatų (maks.)
- Ypatinga funkcija: Surge Protection, Adjustable Voltage, LED Display
- Medžiaga: High-quality ABS (Flame Retardant UL94-V-1.0)
- Prekės svoris: 10.5 uncijos
- Pakuotės matmenys: 5.35 x 5.28 x 3.7 colio
9. Garantija ir palaikymas
BSEED provides a welcome guide with your purchase and offers 24-hour customer service. If you have any requests or doubts, please feel free to contact us.
- Klientų aptarnavimas: Prieinama 24 valandas per parą.
- Susisiekite: Refer to the contact information provided in your product packaging or on the official BSEED websvetainę.
