Įvadas
Thank you for choosing the RESTMO Sprinkler Timer with Brass Inlet. This programmable water timer is designed to simplify your garden watering tasks, providing automatic control for garden hoses, outdoor faucets, drip irrigation systems, and lawn watering. Please read this manual carefully before use to ensure proper installation, operation, and maintenance.
Vaizdas: priekis view of the RESTMO Sprinkler Timer, showing the digital display and control dial.
Saugos informacija
- Do not immerse the timer in water. It is IP54 waterproof, meaning it is protected against dust and splashing water, but not full immersion.
- Use only 2 x AAA 1.5V alkaline batteries (not included). Do not mix old and new batteries or different types of batteries.
- Remove batteries if the timer will not be used for an extended period to prevent leakage.
- Protect the timer from freezing temperatures. Disconnect and store indoors during winter.
- Ensure all connections are tight to prevent leaks. Teflon tape is recommended for a secure seal.
Produktas baigtasview
The RESTMO Sprinkler Timer features a user-friendly design with a large LCD screen and intuitive controls.
Image: Diagram illustrating the various components of the sprinkler timer, including the brass inlet, LCD screen, control dial, and buttons.
Pagrindiniai komponentai:
- Pure Brass Inlet Thread: 360-degree rotatable for easy installation, with a built-in metal filter washer to prevent debris.
- Didelis LCD ekranas: Displays current time, next watering time, and battery status.
- Laikmačio rinkimas: Used to select different settings (SET CLOCK, START TIME, HOW LONG, HOW OFTEN, ON, OFF).
- Mygtukas „Gerai“ / „Rankinis“: Confirms settings and activates manual watering.
- +/- mygtukai: Adjust values and activate rain delay.
- Waterproof Battery Compartment: Houses 2 x AAA batteries.
Vaizdas: Stambus planas view of the 360-degree swivel pure brass inlet, highlighting its design and durability.
Sąranka ir diegimas
Follow these steps to install your RESTMO Sprinkler Timer:
Image: Four-panel diagram showing the installation process: installing batteries, attaching to faucet, attaching hose, and setting the program.
- Įdėkite baterijas: Open the waterproof battery compartment. Insert 2 x AAA 1.5V alkaline batteries (not included), ensuring correct polarity. Close the compartment securely. Keep your hands dry during this process.
- Pritvirtinkite prie čiaupo: Screw the timer's brass inlet onto your 3/4" outdoor faucet. Hand-tighten firmly. For a leak-proof connection, wrap Teflon tape around the faucet threads before attaching the timer.
- Pritvirtinkite žarną: Connect your garden hose to the 3/4" hose connection at the bottom of the timer. Ensure it is tightly secured.
- Turn on Faucet: Open your faucet fully. The timer is designed to operate under water pressure.
Naudojimo instrukcijos
1. Nustatykite laikrodį
This step sets the current time on the timer.
- Pasukite ratuką į NUSTATYTI LAIKRODĮ.
- Paspauskite +/- mygtukais nustatykite dabartinę valandą ir minutę.
- Paspauskite OK button to switch between hour and minute setup.
- Turn the dial to any other position to save changes.
2. Set Start Time
This sets when your automatic watering program will begin.
- Pasukite ratuką į PRADŽIOS LAIKAS.
- Paspauskite +/- mygtukai norimam pradžios laikui nustatyti.
- Paspauskite OK button to switch between hour and minute setup.
- Turn the dial to any other position to save changes.
3. Set Watering Duration (How Long)
This sets how long the watering will last for each cycle.
- Pasukite ratuką į KIEK ILGAI.
- Paspauskite +/- buttons to set the watering duration from 1 minute to 239 minutes.
- Paspauskite OK button to switch between hour and minute setup.
- Turn the dial to any other position to save changes.
4. Set Watering Frequency (How Often)
This sets how often the watering cycles will repeat.
- Pasukite ratuką į KAIP DAŽNAI.
- Paspauskite +/- buttons to set the watering frequency: from 1 hour to 12 hours, or from 1 day to 7 days.
- Paspauskite OK button to switch between hour and day/hour setup.
- Turn the dial to any other position to save changes.
Image: Visual guide showing the range for 'How Long' (1-239 mins) and 'How Often' (1hr-7 days) settings.
5. Automatic Watering
Once programmed, turn the dial to ON to activate the automatic watering schedule. The LCD screen will display the remaining time of the current watering program when watering is active. When watering is off, the screen will flash between the next watering start time and the current time.
Image: Depicts the timer set to 'ON' for automatic watering, with a visual representation of the watering duration and frequency settings.
6. Rankinis laistymas
Norėdami laistyti rankiniu būdu nepakeisdami užprogramuoto grafiko:
- With the dial at ON, long press the OK/MANUAL mygtuką 3 sekundes.
- Paspauskite +/- buttons to select the desired manual watering duration (1 to 239 minutes).
- Paspauskite OK to switch between hour and minute. The setup flashes 3 times and manual watering will automatically start.
- To cancel manual watering, turn the dial to IŠJUNGTA ir tada atgal į ON.
Image: Shows how to activate manual watering and adjust its duration, with a visual of water flowing from the hose.
7. Vėlavimas dėl lietaus
Norėdami laikinai pristabdyti laistymo grafiką dėl lietaus ar kitų priežasčių:
- With the dial at ON, long press the VĖLAVIMAS + mygtuką 3 sekundes.
- Paspauskite +/- buttons to select a delay of 12, 24, 48, or 72 hours.
- Paspauskite OK or wait for 3 seconds to start the rain delay.
- To cancel rain delay, turn the dial to IŠJUNGTA ir tada atgal į ON.
Image: Illustrates the rain delay function with options for 12, 24, 48, and 72-hour delays.
8. Nustokite laistyti
To completely stop all watering programs:
- Pasukite ratuką į IŠJUNGTA. The timer will keep off until the dial is turned to ON vėl.
Image: Shows the timer dial set to 'OFF', indicating that watering has stopped.
Priežiūra
- Valymas: Periodically check the brass inlet filter washer for debris and clean it to ensure optimal water flow.
- Baterijos keitimas: When the battery indicator on the LCD screen shows low power, replace the batteries promptly to avoid interruption of watering schedules.
- Žieminimas: Before the first frost, disconnect the timer from the faucet and hose. Remove the batteries and store the timer indoors in a dry, protected area to prevent damage from freezing.
Trikčių šalinimas
Štai keletas dažniausiai pasitaikančių problemų ir jų sprendimo būdų:
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Laikmatis neįsijungia / LCD ekranas tuščias | Neišsikrovusios arba neteisingai įdėtos baterijos. | Replace batteries with new 2 x AAA alkaline batteries, ensuring correct polarity. |
| Water not flowing/Timer not watering | Faucet is off; low water pressure; clogged filter; incorrect program settings; valve stuck. | Ensure faucet is fully open. Check water pressure (10-120 psi required). Clean the inlet filter. Verify program settings (start time, duration, frequency). Reset the valves (see video below). |
| Vanduo teka iš jungčių | Loose connections; missing/damaged washer; insufficient Teflon tape. | Tighten all connections. Check for and replace any missing or damaged rubber washers. Apply more Teflon tape to faucet threads. |
| Laikmatis nesilaiko tvarkaraščio | Incorrect clock setting; program not activated (dial not on ON); rain delay active. | Re-set the current time. Ensure the dial is set to ON. Check if rain delay is active and cancel if necessary. |
How to Reset the Valves:
If the timer's internal valves are not functioning correctly, you may need to reset them. This process involves cycling water through the timer manually to clear any obstructions or reset the mechanism.
Video: A step-by-step guide on how to reset the internal valves of the RESTMO Sprinkler Timer to ensure proper water flow.
Specifikacijos
- Modelis: O-HT
- Medžiaga: Žalvaris, Metalas
- Įleidimo sriegis: 3/4" NH (Pure Brass)
- Hose Fitting: 3/4 colio
- Laistymo trukmė: 1-239 minučių
- Laistymo dažnis: 1-12 hours or 1-7 days
- Lietaus delsos parinktys: 12/24/48/72 valandos
- Maks. Srautas: 10 gal./min. (35 l/min.)
- Darbinis slėgis: 10–120 PSI (0.5–8.0 barai)
- Temperatūros diapazonas: 38–120 °F (3–50 °C)
- Atsparumo vandeniui įvertinimas: IP54
- Maitinimo šaltinis: 2 x AAA šarminės baterijos (nepridedamos)
- Gaminio matmenys: 3.94 "D x 3.94" P x 1.57" A
- Prekės svoris: 5 uncijos
Garantija ir palaikymas
RESTMO products are designed for durability and performance. For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official Restmo websvetainė. Mūsų klientų aptarnavimo komanda pasirengusi atsakyti į visus jūsų klausimus ar išsakyti savo abejones.
