VIOFO HK5

VIOFO HK5 ACC Hardwire Cable Instruction Manual

For VIOFO VS1 Dash Cam

1. Įvadas

The VIOFO HK5 ACC Hardwire Cable is designed to provide continuous power to your VIOFO VS1 dash cam, enabling advanced parking surveillance features and protecting your vehicle's battery from discharge. This manual provides essential information for proper installation and operation.

VIOFO HK5 ACC Hardwire Cable with USB-C connector and bare wire ends.
Image 1: VIOFO HK5 ACC Hardwire Cable. This cable connects your dash cam directly to your vehicle's power system for continuous operation.

2. Produktas baigtasview

The HK5 ACC Hardwire Cable consists of a USB-C connector for the dash cam, a control box with voltage regulation, and three bare wire leads for connection to your vehicle's electrical system.

Diagram of VIOFO HK5 ACC Hardwire Cable components, showing the USB-C end, control box, and three bare wire leads (red, yellow, black).
Image 2: Components of the HK5 ACC Hardwire Cable. The cable includes a USB-C output, a voltage control module, and input wires for battery, ACC, and ground.

2.1 Suderinamumas

The VIOFO HK5 ACC Hardwire Cable is specifically designed for use with the VIOFO VS1 Dash Cam.

Comparison table of VIOFO hardwire kits (HK3, HK3-C, HK4, HK5) showing applicable models, connector types, input voltage, input interface, and cable length.
Image 3: VIOFO Hardwire Kit Compatibility Chart. This table details the compatibility of various VIOFO hardwire kits with different dash cam models, connector types, input, and length specifications.
VIOFO Hardwire Kit Comparison
FunkcijaHK5
Taikomas modelisVS1
Jungties prievadasC tipo USB
Įvestis12-24V
Įvesties sąsajaACC (geltona), žemė (juoda), baterija (raudona)
Ilgis13.1 pėdos (4 mln.)

3. Sąranka ir diegimas

Proper installation is crucial for the functionality of the hardwire cable and the safety of your vehicle's electrical system. It is recommended to consult a professional if you are unsure about any steps.

3.1 Laidų jungtys

The HK5 hardwire cable features three distinct wires for connection:

  • Red Battery Cable: Connect this to a constant power source in your vehicle's fuse box. This circuit should provide power even when the ignition is off.
  • Yellow ACC Cable: Connect this to an ignition-switched power source in your vehicle's fuse box. This circuit should only provide power when the vehicle's engine is on.
  • Black Ground Cable: Connect this to a metal part of the vehicle's chassis, ensuring a secure ground connection.

Note: Fuse taps are NOT included with the HK5 hardwire cable. You will need to acquire two appropriate fuse taps (one for the red cable, one for the yellow cable) that match your vehicle's fuse type.

Wiring diagram for VIOFO HK5 ACC Hardwire Cable showing connections for Battery (red), ACC (yellow), and Ground (black).
Image 4: Wiring Diagram. This diagram illustrates how to connect the red (battery), yellow (ACC), and black (ground) wires to your vehicle's electrical system.

3.2 Kabelių maršrutizavimas

The hardwire cable has a length of 13.1 feet (4 meters), allowing for flexible routing within most vehicles. Route the cable discreetly along the vehicle's headliner, A-pillar, and dashboard to the fuse box location. Ensure the cable does not interfere with airbags or other safety features.

4. Naudojimo instrukcijos

4.1 Automatic Parking Mode

The HK5 ACC Hardwire Cable enables automatic switching to parking mode for your VS1 dash cam. When the vehicle's engine is turned off, the dash cam will automatically enter parking mode, providing continuous surveillance. When the engine is started, the dash cam will automatically switch back to normal recording mode.

Image showing the VIOFO HK5 ACC Hardwire Cable in a parking lot setting, illustrating its use for parking surveillance.
Image 5: Parking Mode Surveillance. The hardwire cable provides continuous power for parking mode, monitoring your vehicle when the engine is off.

4.2 Žemas tomastage Apsauga

To prevent your vehicle's battery from being drained, the HK5 hardwire cable features low voltage protection. You can configure a voltage cut-off value using the switch on the control box. If the vehicle's battery voltage drops below the selected cut-off value, the hardwire cable will automatically stop supplying power to the dash cam, protecting your battery from excessive discharge.

Close-up of the VIOFO HK5 control box showing voltage cut-off settings for 12V and 24V systems.
Image 6: Configurable Voltage Cut-off. The control box allows selection of voltage cut-off levels to protect your vehicle's battery.

Turima ttage cut-off options are:

  • For 12V systems: 11.8V, 12.0V, 12.2V, 12.4V
  • For 24V systems: 23.6V, 24.0V, 24.4V, 24.8V

Pasirinkite tinkamą tūrįtage cut-off based on your vehicle's battery type and desired protection level.

5. Priežiūra

To ensure optimal performance and longevity of your VIOFO HK5 ACC Hardwire Cable:

  • Periodically inspect all connections to ensure they remain secure and free from corrosion.
  • Ensure the cable is not pinched or exposed to excessive heat or sharp edges.
  • Keep the control box free from dirt and moisture.

6. Problemų sprendimas

  • Dash cam does not power on in parking mode: Verify that the red battery cable is connected to a constant power source and that the fuse tap is correctly installed and functional. Check the voltage cut-off setting; if the battery voltage is below the set value, the cable will not supply power.
  • Dash cam does not switch to normal recording: Ensure the yellow ACC cable is connected to an ignition-switched power source and that its fuse tap is correctly installed.
  • Baterija greitai išsikrauna: Review tavo ttage cut-off setting. A lower cut-off value allows the dash cam to draw power for longer, potentially draining the battery more. Consider increasing the cut-off voltage.
  • No power to dash cam: Check all three connections (red, yellow, black) for secure contact. Inspect the fuse taps and fuses for any damage or blown fuses.

7. Specifikacijos

VIOFO HK5 ACC Hardwire Cable Specifications
FunkcijaSpecifikacija
Modelio numerisHK5
Suderinami įrenginiaiVIOFO VS1 Dash Cam
Jungties tipasC tipo USB
Kabelio tipasUSB Hardwire
Įvesties tomastageDC 12-24V
Išėjimas ttage/srovėDC 5V / 2A Maks
Kabelio ilgis13.1 pėdos (4 m)
Ypatinga funkcijaŽemas tomastage Protection, ACC Detection
Pakuotės matmenys5 x 3.23 x 2.01 colio
Prekės svoris5.93 uncijos
GamintojasVIOFO
A white car parked in a large parking area, illustrating the compatibility of the hardwire kit with various vehicle types.
Image 7: 12/24V Compatibility. The HK5 ACC Hardwire Cable is compatible with vehicles operating on 12V or 24V systems.

8. Garantija ir palaikymas

VIOFO yra įsipareigojusi tiekti patikimus produktus ir puikų klientų aptarnavimą.

  • 30 dienų pinigų grąžinimo garantija: Jei nesate patenkinti pirkiniu, galite turėti teisę į grąžinamąją išmoką per 30 dienų.
  • 24 mėnesių garantija: The HK5 ACC Hardwire Cable comes with an extended 24-month warranty.
  • Specialus klientų aptarnavimas: VIOFO offers 24/7 customer support for any inquiries or assistance you may need.

8.1 Kontaktinė informacija

For support, please contact VIOFO:

Susiję dokumentai - HK5

Preview VIOFO HK4 laidinio kabelio naudotojo vadovas – įrengimas ir specifikacijos
Išsamus VIOFO HK4 laidinio kabelio naudotojo vadovas, kuriame išsamiai aprašyti VIOFO USB C tipo jungties vaizdo registratorių diegimo veiksmai, funkcijos, specifikacijos ir klientų aptarnavimas.
Preview VIOFO HK6 laidinio kabelio naudotojo vadovas: USB C tipo vaizdo registratorių diegimas ir funkcijos
Įdiekite ir naudokite savo VIOFO HK6 laidinį kabelį su šiuo išsamiu naudotojo vadovu. Sužinokite apie parkavimo režimą, mažą garsątagVIOFO USB Type-C vaizdo registratorių išjungimo, akumuliatoriaus stebėjimo ir nuoseklaus diegimo instrukcijos.
Preview VIOFO VS1 vaizdo registratoriaus naudotojo vadovas ir diegimo vadovas
Išsamus VIOFO VS1 vaizdo registratoriaus diegimo, nustatymo ir naudojimo vadovas, įskaitant informaciją apie VIOFO programėlę ir HK4 laidų rinkinį.
Preview VIOFO HK3-C laidinio laidinio rinkinio naudotojo vadovas: diegimas ir funkcijos
Išsamus VIOFO HK3-C laidinio prijungimo rinkinio naudotojo vadovas, kuriame išsamiai aprašomi diegimo veiksmai, tokios funkcijos kaip parkavimo režimas ir mažo garso lygis.tagVIOFO A139 vaizdo registratorių ribinės vertės, specifikacijos ir klientų aptarnavimas.
Preview VIOFO VS1 vaizdo registratoriaus naudotojo vadovas: diegimas, naudojimas ir nustatymai
Explore the VIOFO VS1 dash cam user manual for detailed instructions on installation, recording modes (loop, emergency, parking), video playback, smartphone connectivity, and system settings. Enhance your driving experience with VIOFO.
Preview VIOFO A139 vaizdo registratoriaus naudotojo vadovas
Išsamus VIOFO A139 vaizdo registratoriaus naudotojo vadovas, kuriame išsamiai aprašomas diegimas, veikimas, sistemos nustatymai, programinės įrangos atnaujinimai ir išmaniojo telefono programėlės prijungimas, siekiant optimalaus vairavimo įrašymo ir saugumo.