Maxxima MRL-61505B

Maxxima 6-inch Retrofit Recessed Anti-Glare LED Downlight User Manual

Model: MRL-61505B

Įvadas

This manual provides detailed instructions for the installation, operation, and maintenance of your Maxxima 6-inch Retrofit Recessed Anti-Glare LED Downlight. Please read these instructions thoroughly before beginning installation and retain them for future reference. This product is designed for use in existing 5 or 6-inch recessed can housings.

Saugos informacija

ĮSPĖJIMAS: Elektros smūgio pavojus. Prieš montuodami ar atlikdami techninę priežiūrą, atjunkite maitinimą nuo saugiklio arba grandinės pertraukiklio.

Pakuotės turinys

Maxxima 6-inch Retrofit Recessed Anti-Glare LED Downlight with E26 adapter and torsion springs

Image: The Maxxima 6-inch Retrofit Recessed Anti-Glare LED Downlight, showing the main unit, E-26 quick connect adapter, and the attached torsion springs.

Savybės

Maxxima 6-inch Retrofit Recessed Anti-Glare LED Downlight installed in a ceiling, showing the anti-glare effect.

Image: An installed Maxxima downlight demonstrating its anti-glare design in a room setting.

Sąranka ir diegimas

Follow these steps to properly install your Maxxima LED Downlight. Ensure power is OFF before starting.

  1. Išjungti maitinimą: Locate the circuit breaker or fuse box controlling the light fixture you are replacing and turn off the power.
  2. Prepare Existing Can: Remove the existing bulb and trim from your 5 or 6-inch recessed can housing.
  3. Pasirinkite spalvos temperatūrą (CCT): On the back of the LED downlight, locate the CCT selection switch. Choose your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K) by sliding the switch. This setting can be changed later if needed.
  4. Close-up of the CCT selection switch on the back of the Maxxima LED downlight.

    Image: The CCT selection switch on the back of the downlight, allowing choice between 2700K, 3000K, 3500K, 4000K, and 5000K.

  5. Prijunkite E-26 adapterį: Connect the E-26 Quick Connect Adapter to the socket in your existing recessed can.
  6. Maxxima LED downlight with the E26 quick connect adapter attached.

    Image: The E-26 Quick Connect Adapter connected to the downlight's wiring.

  7. Prijunkite žemyn nukreiptą šviestuvą: Plug the quick connect cable from the LED downlight into the E-26 adapter.
  8. Įdėkite į skardinę: Carefully push the LED downlight into the recessed can. The torsion springs on the sides of the downlight will compress and hold the fixture securely in place against the ceiling. Ensure the springs engage with the torsion clips inside the can housing. If the light does not sit flush, ensure the existing socket is pushed up as far as possible or disconnected if it obstructs the fixture.
  9. Atkurti maitinimą: Once the downlight is securely installed, restore power at the circuit breaker or fuse box.

Video: Official Maxxima installation guide for the 6-inch Anti-Glare Retrofit LED Downlight, demonstrating the CCT selection and installation process.

Naudojimo instrukcijos

Priežiūra

Trikčių šalinimas

ProblemaGalima priežastisSprendimas
Šviesa neįsijungia.Nėra elektros, atsilaisvinęs kontaktas, sugedęs šviestuvas.Check circuit breaker. Ensure all connections are secure. If problem persists, contact support.
Šviesa mirksi arba netinkamai pritemsta.Nesuderinama pritemdymo sistema, atsilaisvinę laidai.Įsitikinkite, kad naudojate su LED suderinamą šviesos reguliatorių. Patikrinkite laidų jungtis.
Fixture does not sit flush with the ceiling.Torsion springs not properly engaged, obstruction in can, existing socket too low.Ensure torsion springs are fully engaged with the can's clips. Check for any obstructions inside the can. Adjust the height of the existing socket or remove it if it interferes with the fixture's depth. Bend the torsion springs from near the tops to maintain tension if they have lost shape.

Specifikacijos

SpecifikacijaDetalė
Modelio numerisDLK-61505B
Dydis6 colio
Vattage15W
Šviesos išvestis1200 liumenų
Spalvų temperatūra (CCT)2700K / 3000K / 3500K / 4000K / 5000K Selectable
Pritemdomas10 % – 100 %
CRI90
ttage120 VAC
Sijos plitimas36°
Matmenys7.1 colių ilgis x 7.1 colių plotis x 4.5 colio aukštis
MedžiagaAliuminis
Viso naudojimo valandos50,000 valandos
SertifikataiETL sąraše, atitinka Kalifornijos T20 reikalavimus
Naudojimas viduje / laukeVidinis (Damp Įvertintas)

Garantija

This Maxxima LED Downlight comes with a 3 metų garantija nuo įsigijimo datos. Ši garantija taikoma medžiagų ir gamybos defektams, atsiradusiems įprasto naudojimo sąlygomis. Dėl garantijos pretenzijų ar išsamesnės informacijos kreipkitės į „Maxxima“ klientų aptarnavimo tarnybą.

Palaikymas

For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact Maxxima customer service. Refer to the product packaging or the Maxxima websvetainė, kurioje pateikiama naujausia kontaktinė informacija.