„Phanteks XT Pro Mid-Tower“ žaidimų korpuso naudotojo vadovas

1. Įvadas

Thank you for choosing the Phanteks XT Pro Mid-Tower Gaming Chassis. This manual provides detailed instructions for the assembly, installation, and maintenance of your new PC case. The XT Pro is designed for high airflow performance, featuring a mesh front panel and tempered glass side panel, offering excellent cooling capabilities and a clear view of your internal components. It supports a wide range of hardware, including large graphics cards and extensive cooling solutions.

Figure 1.1: Phanteks XT Pro Mid-Tower Gaming Chassis, showcasing its sleek black design and tempered glass side panel.

2. Saugos informacija

• Always disconnect the power supply from the wall outlet before performing any installation, cleaning, or maintenance.
• Handle tempered glass panels with care. They are fragile and can shatter if dropped or subjected to impact.
• Avoid exposing the chassis to extreme temperatures, humidity, or direct sunlight.
• Keep small components and screws out of reach of children.
• Ensure proper grounding to prevent electrostatic discharge (ESD) damage to sensitive electronic components.
• Do not attempt to modify the chassis structure or components, as this may void your warranty and pose safety risks.

3. Pakuotės turinys

Please verify that all items listed below are present in your package. If any items are missing or damaged, please contact Phanteks customer support.

• Phanteks XT Pro Mid-Tower Chassis
• Priedų dėžutė (varžtai, užtrauktukai, tarpinės ir kt.)
• Vartotojo vadovas (šis dokumentas)
• (Optional, depending on model) 1x 120mm Fan

4. Sąranka ir diegimas

4.1 Važiuoklės paruošimas

Before installing components, remove the side panels. The tempered glass side panel is typically secured with thumbscrews at the rear. The solid steel side panel may also use thumbscrews or a latch mechanism.

4.1 paveikslas: View of the Phanteks XT Pro chassis with the tempered glass side panel installed.

4.2 pav.: Galinis salonas view of the chassis, showing cable management routes and drive mounting locations.

4.2 Pagrindinės plokštės montavimas

Install the necessary motherboard standoffs into the chassis tray according to your motherboard's form factor (ATX, Micro-ATX, Mini-ITX). Carefully place the motherboard onto the standoffs, aligning the screw holes, and secure it with the provided motherboard screws.

4.3 pav. Vidus view of the Phanteks XT Pro with a motherboard, CPU cooler, and graphics card installed.

4.3 Maitinimo bloko (PSU) montavimas

The PSU mounts at the bottom rear of the chassis. Slide your PSU into the designated bay from the rear and secure it with screws. Ensure the PSU fan faces downwards (if the case has a bottom vent) or upwards, depending on your cooling preference.

4.4 Atminties disko diegimas

The XT Pro supports multiple storage drives.

• 3.5 colio kietieji diskai: Install into the drive cage located under the PSU shroud.
• 2.5 colio SSD diskai: Mount to the dedicated SSD brackets behind the motherboard tray.

Figure 4.4: Diagram illustrating the locations for 3.5" HDDs and 2.5" SSDs within the chassis.

4.5 Vaizdo plokštės (GPU) diegimas

Remove the necessary PCIe slot covers at the rear of the chassis. Insert your graphics card into the PCIe slot on the motherboard and secure it with the thumbscrew or latch mechanism. The XT Pro supports large graphics cards without compromise.

4.6 Ventiliatoriaus ir radiatoriaus montavimas

The XT Pro offers extensive cooling support:

• Priekyje: Up to 3x 120mm or 2x 140mm fans.
• Į viršų: Up to 3x 120mm or 2x 140mm fans, supporting up to a 360mm radiator.
• Galinis: 1x 120mm fan.
• Apačia: Up to 2x 120mm fans.

Install fans and radiators using the appropriate screws. Ensure correct airflow direction for optimal cooling.

Figure 4.5: Diagram showing fan and radiator mounting locations and supported sizes (120mm, 140mm, and radiator sizes).

4.7 Kabelių valdymas

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables neatly. This improves airflow and aesthetics. Secure cables with zip ties or Velcro straps.

5. Važiuoklės valdymas

5.1 Priekinis įvesties / išvesties skydelis

The front I/O panel is located on the top of the chassis and provides convenient access to essential ports and controls.

• Maitinimo mygtukas: Įjungia/išjungia sistemą.
• Atkūrimo mygtukas: Iš naujo paleidžia sistemą.
• USB 3.0 prievadai: Dėl didelės spartos duomenų perdavimo.
• USB-C 3.0 prievadas: Skirta šiuolaikiniams USB-C įrenginiams.
• Garso lizdai: Headphone and microphone ports.

5.1 pav. Iš arti view of the top I/O panel, indicating the Power Button, Reset Button, USB 3.0, USB-C 3.0, and Audio/Microphone jacks.

6. Priežiūra

Reguliarus techninis aptarnavimas padeda užtikrinti optimalų kompiuterio komponentų veikimą ir ilgaamžiškumą.

• Dulkių filtrai: The XT Pro features an ultra-fine performance mesh front panel and a top dust filter. Regularly clean these filters to maintain optimal airflow. They can typically be removed and cleaned with compressed air or a soft brush.
• Išorinis valymas: Išorinius paviršius nuvalykite minkšta, damp skudurėliu. Venkite abrazyvinių valiklių ar tirpiklių.
• Vidaus valymas: Periodically use compressed air to remove dust buildup from internal components like fans, heatsinks, and circuit boards. Ensure the system is powered off and unplugged before cleaning.

7. Problemų sprendimas

Šiame skyriuje aptariamos dažniausiai pasitaikančios problemos, su kuriomis galite susidurti.

• Sistema neįsijungia:
  • Check all power connections: PSU to wall, PSU to motherboard, and front panel power switch cable to motherboard.
  • Ensure the PSU switch is in the "ON" position.
• Nėra ekrano išvesties:
  • Verify that the monitor cable is securely connected to the graphics card (or motherboard, if using integrated graphics).
  • Iš naujo įstatykite grafikos plokštę ir RAM modulius.
• Per didelis triukšmas:
  • Check if any fan cables are obstructing fan blades.
  • Ensure all fans are securely mounted.
  • Clean dust from fans and filters.
• Poor airflow/high temperatures:
  • Išvalykite visus dulkių filtrus ir vidinius komponentus.
  • Verify correct fan orientation (intake/exhaust).
  • Ensure no cables are blocking airflow paths.

For further assistance, please refer to the Phanteks support websvetainėje arba susisiekite su jų klientų aptarnavimo tarnyba.

8. Specifikacijos

8.1 pav.: Matmenų perimetrasview of the Phanteks XT Pro chassis.

9. Garantija ir palaikymas

Phanteks products come with a limited warranty. Please refer to the official Phanteks website for the most up-to-date warranty information and terms specific to your region.

For technical support, product registration, or to download the latest drivers and manuals, please visit the official Phanteks support page:www.phanteks.com/support.html

When contacting support, please have your product model number (PH-XT523P1_BK01) and purchase information ready.