PULACO 130W 3700GPH Amphibious Water Pump Instruction Manual

1. Įvadas

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your PULACO 130W 3700GPH Amphibious Water Pump. This versatile pump is designed for use in various water environments, including garden ponds, aquariums, and fountains. It features a variable frequency motor for energy efficiency and quiet operation.

Please read this manual thoroughly before using the pump and retain it for future reference.

2. Produkto ypatybės

• Ampžiaurus dizainas: Operates both submerged (submersible mode) and externally (ground mode).
• Variable Frequency Motor: Ensures ultra-quiet operation and energy efficiency.
• Patvari konstrukcija: Features an abrasion-resistant ceramic axis and ABS impeller for extended service life.
• Šiluminė apsauga: Built-in device to prevent overheating and ensure continuous high-performance operation.
• Didelis našumas: Maximum flow rate of 3700 Gallons Per Hour (GPH) and a maximum lift of 24 feet.
• IPX8 atsparumo vandeniui įvertinimas: Motor is sealed by resin, allowing safe underwater installation.
• Large Strainer: Designed to prevent large debris from entering the pump.

3. Pakuotės turinys

Atidarę pakuotę, patikrinkite, ar visos prekės yra pakuotėje ir nepažeistos:

• 1 x PULACO Water Pump with 24.75 ft power cord
• 4 x siurbtukai
• 1 x 30 mm Nozzle
• 1 x 35 mm Nozzle
• 2 sandarinimo žiedai
• 2 x Adjustable Fasten Steel Rings
• 2 x 1.5 inch PVC Connectors

Image: Contents of the PULACO Water Pump package, including the pump, power cord, suction cups, various nozzles, sealing rings, and PVC connectors.

4. Saugos instrukcijos

ĮSPĖJIMAS: Nesilaikant šių saugos nurodymų, gali kilti elektros smūgis, gaisras arba sunkūs sužalojimai.

• Prieš atlikdami bet kokius techninės priežiūros, montavimo ar valymo darbus, visada atjunkite maitinimo šaltinį.
• Įsitikinkite, kad siurblys yra tinkamai įžemintas, kad išvengtumėte elektros pavojaus.
• Do not operate the pump dry (without water) as this can cause severe damage and void the warranty.
• Reguliariai tikrinkite maitinimo laidą ir siurblį, ar nėra kokių nors pažeidimų. Nenaudokite, jei jie pažeisti.
• Keep the pump and power cord out of reach of children and pets.
• Use the pump only for its intended purpose as described in this manual.
• Ensure the electrical outlet is protected by a Ground Fault Circuit Interrupter (GFCI) for outdoor or wet applications.
• Nekelkite ir neneškite siurblio už maitinimo laido.

5. Sąranka ir diegimas

The PULACO water pump can be installed in two modes: Submersible Mode or Ground Mode.

5.1. Komponentas baigtasview

Image: Diagram illustrating the main components of the pump, including the handle, shaft, water outlet, water inlet, pump body, and detachable filter cover.

5.2. Nozzle and Connector Attachment

Select the appropriate nozzle (30mm or 35mm) or 1.5-inch PVC connector based on your tubing requirements. Ensure sealing rings are properly seated for a watertight connection. Use the adjustable fasten steel rings to secure soft tube connections.

Image: The pump with its dimensions (10 inches long, 4.3 inches wide) and examples of 1.2-inch, 1.4-inch nozzles, and 1.5-inch PVC connectors.

5.3. Adjustable Outlet Direction

The pump's outlet direction can be adjusted to suit your setup, offering flexibility for connection angles (0°, 90°, 180°).

Image: Illustration of the pump's adjustable water outlet, demonstrating how it can be rotated to different angles for convenient connection.

5.4. Installation Modes

Image: Visual guide for installing the pump in Submersible Mode (fully submerged) and Ground Mode (external, with the pump below the water line).

Submersible Mode:

Install the pump completely underwater. The IPX8 submersible design ensures safe operation. Use the suction cups to secure the pump to a clean, flat surface at the bottom of your pond or aquarium.

Ground Mode (External Installation):

For ground mode, install the pump lower than the pool/tank water line to ensure water flows to the inlet automatically. This pump does not have a self-priming function. Seal the 1.5-inch PVC connectors with PTFE tape for a secure, leak-free connection. Install the pump in a cool place to prevent overheating. Do not continuously run the pump for over 24 hours in Ground Mode, especially in high-temperature environments, to ensure normal service life.

6. Naudojimo instrukcijos

Once installed and connected, the pump operates simply:

1. Ensure all connections are secure and the pump is correctly positioned for your chosen mode (submersible or ground).
2. Plug the power cord into a suitable, grounded electrical outlet. The pump will start working immediately.
3. To stop the pump, unplug the power cord from the electrical outlet.

For optimal performance in Ground Mode, ensure the pump is always below the water level of the source to facilitate water intake.

Vaizdas: pvzamples of the PULACO water pump in various applications, including a garden pond with a waterfall, an aquarium, an aquaculture setup, and a small pool.

7. Priežiūra

Regular cleaning and maintenance are crucial for ensuring the pump's standard performance and extending its lifespan.

1. Atjunkite maitinimą: Prieš bet kokius techninės priežiūros darbus visada atjunkite siurblį nuo maitinimo šaltinio.
2. Nuimkite filtro dangtelį: Detach the filter cover from the pump body.
3. Prieigos sparnuotė: Carefully remove the impeller. Refer to the 'Pump Disassembly Diagram' in Section 5.1 for guidance.
4. Švarūs komponentai: Use a small brush or a stream of water to remove any accumulated debris, algae, or mineral deposits from the filter cover, impeller, and pump housing.
5. Patikrinkite, ar nėra pažeidimų: Check the impeller and ceramic axis for any signs of wear or damage. Replace if necessary.
6. Surinkti iš naujo: Reassemble the pump components in reverse order, ensuring all parts are securely fitted.
7. Reguliarus valymas: Clean the pump regularly, especially if operating in environments with high debris or algae content.

8. Problemų sprendimas

If you encounter issues with your PULACO water pump, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact PULACO customer support.

9. Specifikacijos

10. Garantija ir palaikymas

For warranty information or technical support, please contact PULACO customer service directly. Keep your purchase receipt as proof of purchase.

PULACO Customer Service: Refer to the contact information provided with your product packaging or visit the official PULACO websvetainę.