Įvadas
Thank you for choosing the ErGear Electric Standing Desk. This manual provides comprehensive instructions for the assembly, operation, and maintenance of your new height-adjustable desk. Please read this manual carefully before assembly and use to ensure safe and efficient operation.
Image: The ErGear Electric Standing Desk, 44x24 inches, in vintage brown, set up with a laptop, monitor, and other office items. It features a control panel for height adjustment.
Svarbi saugos informacija
- Do not exceed the recommended maximum weight limit of 176 pounds to ensure stability and longevity of the desk.
- Ensure all cables are properly managed and have sufficient slack to avoid damage or disconnection during height adjustments.
- Darbo metu laikykite vaikus ir naminius gyvūnus atokiau nuo stalo, kad išvengtumėte sužalojimų.
- Venkite pilti skysčius tiesiai ant valdymo skydelio arba šalia elektrinių komponentų.
- Naudokite tik pateiktą maitinimo adapterį ir komponentus.
- Reguliariai tikrinkite visus varžtus ir jungtis, kad jie būtų tvirtai priveržti.
Pakuotės turinys
Before beginning assembly, please verify that all components are present and undamaged. Refer to the assembly video for a visual guide to the parts.
- Desktop (Two-piece)
- Stalo kojos (2)
- Šoninės plokštės (2)
- Transmisijos strypas
- Valdymo skydelis
- Maitinimo adapteris
- Kabelių valdymo spaustukai
- Ausinių kabliukai (2)
- All necessary screws and tools (Allen wrench, etc.)
Paveikslėlis: sprogęs view of the ErGear Electric Standing Desk components, including the two-piece desktop, leg frames, control panel, and various hardware, laid out on a white background.
Sąranka ir surinkimas
Follow these steps to assemble your ErGear Electric Standing Desk. An average assembly time is approximately 30 minutes.
Step 1: Assemble the Desk Legs
- Attach the foot pads to the bottom of each leg.
- Connect the leg frames using the provided crossbar and screws. Ensure all screws are tightened securely.
Vaizdas: Stambus planas view of the desk leg assembly, showing screws being inserted to secure the leg components.
Step 2: Attach Side Plates and Transmission Rod
- Secure the side plates to the top of the assembled leg frames using the designated screws.
- Insert the transmission rod into the appropriate slots on the leg frames and motor assembly. Ensure it is fully engaged. If the desk legs are not the same height, insert the rod into the left leg and turn to adjust until they are level.
Image: The desk frame with the transmission rod correctly installed, connecting the two leg mechanisms.
Step 3: Assemble the Desktop and Other Parts
- Place the two-piece desktop upside down on a soft, clean surface.
- Align the desktop pieces and secure them together using the provided connectors and screws.
- Carefully place the assembled leg frame onto the desktop, aligning the screw holes.
- Attach the leg frame to the desktop using the provided screws.
- Install the control panel and headphone hooks to the underside of the desktop as indicated in the instructions.
Image: The underside of the desk, showing the control panel and cable management clips attached to the desktop.
4 veiksmas: prijunkite laidus
- Connect the motor cable to the control box.
- Connect the control panel cable to the control box.
- Connect the power adapter to the control box and then to a power outlet.
- Use the provided cable management clips to organize all cables neatly.
For a visual step-by-step guide, please watch the official assembly video:
Video: Official ErGear Electric Standing Desk Assembly Video. This video demonstrates the complete assembly process for the EGESD4/5/6 models, including attaching legs, side plates, transmission rod, desktop, and connecting cables.
Naudojimo instrukcijos
Your ErGear Electric Standing Desk features an intuitive control panel for easy height adjustment and memory presets.
Aukščio reguliavimas
- Pakelkite stalą: Paspauskite ir palaikykite Rodyklė aukštyn (▲) button to raise the desk to your desired height.
- Apatinis stalas: Paspauskite ir palaikykite Rodyklė žemyn (▼) button to lower the desk to your desired height.
- The desk height can be adjusted smoothly from 28.35 inches to 46.46 inches.
Image: A close-up of the ErGear desk control panel, showing the digital height display and the up/down arrow buttons for manual adjustment.
Atminties išankstiniai nustatymai
The control panel allows you to save up to three preferred height settings for quick transitions.
- Norėdami išsaugoti išankstinį nustatymą: Adjust the desk to your desired height using the up/down arrows. Press the "S" button, then immediately press one of the number buttons („1“, „2“, arba „3“), kad išsaugotumėte dabartinį aukštį tame iš anksto nustatytame parametre.
- Norėdami naudoti išankstinį nustatymą: Tiesiog paspauskite atitinkamą skaičių mygtuką („1“, „2“, arba „3“). Stalas automatiškai pasislinks į išsaugotą aukštį.
Observe the smooth operation of the desk's height adjustment:
Video: A user demonstrating the height adjustment feature of the ErGear Standing Desk. The desk smoothly moves up and down, showcasing the electric motor's functionality and the ease of using the control panel.
Priežiūra
- Valymas: Nuvalykite darbalaukio paviršių minkšta,amp šluoste. Venkite stiprių cheminių medžiagų ar abrazyvinių valiklių, kurie gali pažeisti apdailą.
- Patikra: Periodiškai patikrinkite visus varžtus ir jungtis, kad jie būtų tvirtai priveržti. Jei reikia, priveržkite.
- Kabelių valdymas: Ensure cables remain organized and free from entanglement to prevent damage during height adjustments.
- Variklio priežiūra: The motor is designed for long-term operation. Avoid overloading the desk beyond its maximum weight capacity.
Trikčių šalinimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Stalas nejuda. | Power cable disconnected; motor cable disconnected; overload. | Check all cable connections. Ensure desk is plugged into a working outlet. Reduce weight on the desk. |
| Stalas juda netolygiai. | Transmission rod not properly engaged; uneven weight distribution. | Verify the transmission rod is fully inserted and adjusted. Distribute weight evenly on the desktop. |
| Stalas skleidžia neįprastus garsus. | Loose screws; obstruction. | Check and tighten all assembly screws. Ensure no objects are obstructing the lifting mechanism. |
| Memory presets not working. | Išankstiniai nustatymai neišsaugoti teisingai. | Re-save your desired height settings by pressing "S" then the number button. |
Specifikacijos
- Prekinis ženklas: ErGear
- Modelio numeris: EGESD71V-US
- Stalo dizainas: Elektrinis stovimas stalas
- Darbastalio medžiaga: Inžinerinė mediena (laminuota)
- Pagrindinė medžiaga: Legiruotasis plienas
- Spalva: Vintage Ruda
- Dydis: 44x24 colių
- Minimalus aukštis: 28.35 colių
- Maksimalus aukštis: 46.46 colių
- Stalviršio storis: 0.75 colių
- Rekomendacija dėl didžiausios masės: 176 svaro
- Reikalingas surinkimas: Taip (rekomenduojama 1 asmeniui)
- Į UL sąrašą įtraukta: Taip
Informacija apie garantiją
ErGear products come with a limited warranty. For specific details regarding your product's warranty coverage, please refer to the documentation included with your purchase or visit the official ErGear websvetainę.
- Stalinis stalas ir stalo rėmas: 5 metų apsauga
- Varikliai ir elektros komponentai: 2 metų apsauga
Pagalba klientams
If you encounter any issues or have questions regarding your ErGear Electric Standing Desk, please contact our customer support team for assistance.
- Palaikymas internetu: Visit the official ErGear webDUK ir pagalbos išteklių svetainė.
- El. paštas: Refer to your product packaging or the ErGear webklientų aptarnavimo el. pašto adresų svetainė.
- Telefonas: Refer to your product packaging or the ErGear webklientų aptarnavimo telefono numerių svetainė.
