FLASHFORGE Camera Kit User Manual

1. Įvadas

This user manual provides detailed instructions for the installation, operation, and maintenance of your FLASHFORGE Camera Kit. Designed for seamless integration with FLASHFORGE Adventurer 5M, Adventurer 5M Pro, and AD5X 3D printers, this camera enables real-time and remote monitoring of your printing process, enhancing convenience and control.

2. Pakuotės turinys

Įsitikinkite, kad pakuotėje yra visi komponentai:

• Kameros modulis
• Fotoaparato kabelis
• M3.5*8 varžtas
• 2.5 mm šešiakampis veržliaraktis

Image: Components of the FLASHFORGE Camera Kit.

3. Sąranka ir diegimas

Follow these steps to install the camera module on your 3D printer.

3.1 Aparatinės įrangos diegimas

1. Prepare the Camera Module: Insert the smaller end of the camera cable into the camera port. Thread the camera cable out through the hole of the camera module.
   

   Image: Detailed steps for camera cable insertion and threading.
2. Sumontuokite fotoaparatą: Install the camera on the inner side of the printer's front-right area. Ensure the protrusions on both sides of the camera fit into the locating holes.
3. Apsaugokite fotoaparatą: Use the provided 2.5mm Allen wrench to tighten the M3.5*8 screw into the hole, securing the camera in place.
4. Connect to Screen: Gently lift and slide the printer's screen to the right to detach it. Remove the upper port cover on the screen. Insert the other end of the camera cable into the designated port on the screen.
5. Reattach Screen: Carefully reattach the screen to the printer, ensuring all connections are secure.

3.2 Programinės įrangos aktyvinimas

1. Prieigos nustatymai: On the printer's touchscreen, navigate to the settings menu (gear icon).
2. Įjungti fotoaparatą: Within the settings, locate the camera icon. Turn on both the "Camera" and "Video" functions to enable the camera.

4. Naudojimo instrukcijos

4.1 Real-time and Remote Monitoring

The FLASHFORGE Camera Kit allows you to monitor your 3D prints in real-time from anywhere using the compatible Flash Maker App or Orca-Flashforge slicing software.

• Flash Maker App: Download and install the Flash Maker App on your mobile device. Connect the app to your 3D printer to view a live stream of your print progress and control basic printer functions remotely.
• Orca-Flashforge Slicing Software: For desktop monitoring, use the Orca-Flashforge slicing software. After sending a print job to your printer, you can access a live camera feed within the software interface.

Image: Remote monitoring of a 3D print via a mobile application.

Image: Print monitoring setup with desktop software and mobile app.

4.2 Time-Lapse Video Recording

The camera module supports time-lapse video recording of your entire printing process. These videos are stored on the printer's internal memory and can be downloaded after the print job is complete.

• Access Time-Lapse: After a print job finishes, navigate to the "Device Status" section in the Flash Maker App or Orca-Flashforge software.
• Atsisiųsti vaizdo įrašą: Select the completed print job and choose the option to download the time-lapse video.

Image: Camera capturing a time-lapse video of the 3D printing process.

5. Priežiūra

5.1 Firmware atnaujinimai

Regular firmware updates are provided to maintain a reliable and seamless connection for your camera kit. Ensure your printer's firmware is always up-to-date for optimal performance.

• Patikrinkite, ar nėra atnaujinimų: Periodically check for new firmware versions through your printer's settings menu or the Flash Maker App.
• Įdiegti naujinimus: Follow the on-screen prompts to download and install any available firmware updates.

Image: Firmware update notification on the 3D printer's display.

5.2 Valymas

To ensure clear image quality, regularly clean the camera lens with a soft, dry, lint-free cloth. Avoid using abrasive cleaners or solvents.

6. Problemų sprendimas

• Nėra kameros transliacijos:
  • Ensure the camera module is correctly installed and securely connected to the screen.
  • Verify that the "Camera" and "Video" functions are enabled in the printer's settings.
  • Check your network connection for both the printer and your monitoring device.
  • Atnaujinkite spausdintuvo programinę-aparatinę įrangą į naujausią versiją.
• Prasta vaizdo kokybė:
  • Nuvalykite fotoaparato objektyvą minkšta, sausa šluoste.
  • Ensure adequate lighting within the printer's build chamber.
• Time-Lapse Not Recording:
  • Confirm that the "Video" function is enabled in the printer's settings.
  • Ensure there is sufficient internal storage on the printer for time-lapse videos.

7. Specifikacijos

8. Garantija ir palaikymas

For warranty information and technical support, please refer to the warranty card included with your product or visit the official FLASHFORGE website. You can also contact FLASHFORGE customer service directly for assistance.

FLASHFORGE Official Store: Apsilankykite parduotuvėje