1. Įvadas
The YUHANUS 125KHZ RFID ID Cards Keypad Panel is a robust access control system designed for secure entry management. It supports up to 1000 user cards and a unique PIN, offering multiple access methods including ID card, PIN, or a combination of both. Constructed from fire-resistant ABS material, this keypad ensures durability and safety. It features full programming directly from the keypad, an anti-tamper alarm, and supports an external doorbell chime. This manual provides detailed instructions for installation, operation, and maintenance.
2. Saugos informacija
- Prieš montuodami ir naudodami atidžiai perskaitykite visas instrukcijas.
- Ensure power is disconnected before wiring to prevent electrical shock.
- This device is designed for indoor use or protected outdoor environments. Avoid direct exposure to water or extreme weather conditions.
- Only use the specified power supply (DC 12V).
- Nebandykite patys ardyti ar remontuoti įrenginio. Dėl remonto kreipkitės į kvalifikuotus specialistus.
3. Pakuotės turinys
- 1x YUHANUS 125KHZ RFID ID Keypad Panel
- 10x 125KHZ ID Keyfobs
- Tvirtinimo varžtai ir sieniniai kaiščiai
- Vartotojo vadovas (šis dokumentas)
Image: Included 125KHZ ID Keyfobs
4. Produktas baigtasview
The keypad panel features a numeric keypad, status indicator LEDs, and a doorbell button. The rear panel includes wiring terminals and an anti-tamper jungiklis.
Vaizdas: priekis view of the Keypad Panel
Image: Keypad Panel with External Doorbell Connection
Image: Anti-Tamper Switch (Internal)
5. Specifikacijos
| Funkcija | Specifikacija |
|---|---|
| Modelio numeris | CU-K03 |
| Medžiaga | Akrilnitrilo butadieno stirenas (ABS) |
| Matmenys (I x P x A) | 4.33 x 2.95 x 0.79 colio |
| Prekės svoris | 7 uncijos (0.2 kilogramo) |
| Veiklos ttage | DC 12 voltų |
| Vartotojo talpa | Up to 1000 cards/PINs |
| Kortelės tipas | 125KHz ID Cards |
| Ypatingos savybės | Passcode Unlock, Anti-tamper Alarm, External Doorbell Support |
| Ekrano tipas | LCD arba LED |
Paveikslėlis: Produkto matmenys
6. Sąranka
6.1 Montavimas
- Choose a suitable mounting location, typically near the door to be controlled. Ensure it is protected from direct weather exposure if installed outdoors.
- Mark the drilling points for the mounting screws using the backplate as a template.
- Gręžkite skyles ir, jei reikia, įstatykite sieninius kaiščius.
- Pritvirtinkite galinę plokštę prie sienos.
6.2 Laidai
Svarbu: Disconnect all power before performing any wiring connections.
Image: Wiring Terminal Block
Image: Wiring Diagram of the Access Control System
Refer to the wiring diagram above and the terminal block image for connections. Common connections include:
- +12V ir GND: Connect to a DC 12V power supply.
- NO/PUSH, COM, NC: Connect to your electric lock (e.g., magnetic lock, electric strike).
- ATVIRAS: Connect to an exit button.
- BELL, BELL: Connect to an external doorbell chime.
6.3 Pradinis įjungimas
- After completing all wiring, apply DC 12V power to the unit.
- The keypad will emit a beep, and the indicator lights will flash, indicating successful power-up.
- The default Master Code is typically 123456. It is highly recommended to change this immediately after initial setup.
7. Naudojimo instrukcijos
7.1 Programavimo režimas
To enter programming mode: Press * then enter the Master Code (default: 123456) then press #. The red LED will illuminate.
To exit programming mode: Press *. The red LED will turn off.
7.2 Pakeiskite pagrindinį kodą
- Įeikite į programavimo režimą.
- Paspauskite 0.
- Enter your new 6-digit Master Code.
- Paspauskite # patvirtinti.
- Išeikite iš programavimo režimo.
7.3 Adding User Cards/PINs
The system supports up to 1000 users.
- Įeikite į programavimo režimą.
- Paspauskite 1 to add a user.
- For Card Only Access: Present the ID card to the keypad. The keypad will beep, and the card is added.
- For PIN Only Access: Enter a 4-6 digit PIN, then press #. Repeat the PIN and press # dar kartą patvirtinti.
- For Card + PIN Access: Present the ID card, then enter a 4-6 digit PIN, then press #. Repeat the PIN and press # dar kartą patvirtinti.
- To add more users, repeat step 3 or 4.
- Išeikite iš programavimo režimo.
7.4 Deleting User Cards/PINs
- Įeikite į programavimo režimą.
- Paspauskite 2 to delete a user.
- To Delete by Card: Present the ID card to the keypad. The keypad will beep, and the card is deleted.
- To Delete by PIN: Enter the 4-6 digit PIN, then press #.
- To delete more users, repeat step 3 or 4.
- Išeikite iš programavimo režimo.
7.5 Accessing the Door
Image: User Interacting with Keypad
- Card Only: Present your registered ID card to the keypad. The green LED will flash, and the door will unlock.
- PIN Only: Enter your registered 4-6 digit PIN, then press #. The green LED will flash, and the door will unlock.
- Card + PIN: Present your registered ID card, then enter your 4-6 digit PIN, then press #. The green LED will flash, and the door will unlock.
7.6 Durų skambučio funkcija
Press the doorbell button (bell icon) on the keypad to activate the external doorbell chime (if connected).
Image: Doorbell Button
7.7 Anti-Tamper aliarmas
If the keypad is forcibly removed from its mounting location, the built-in anti-tamper switch will trigger a loud alarm. To silence the alarm, re-secure the keypad or enter the Master Code.
8. Priežiūra
- Clean the keypad surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Regularly check wiring connections for any signs of wear or damage.
- Ensure the keypad is securely mounted to prevent accidental tamperingas.
9. Problemų sprendimas
- Klaviatūra nereaguoja: Check power supply connections. Ensure DC 12V is correctly applied.
- Door does not unlock:
- Verify the ID card or PIN is correctly registered.
- Check wiring to the electric lock. Ensure COM, NO/PUSH, NC connections are correct for your lock type.
- Confirm the power supply is adequate for both the keypad and the lock.
- Anti-tamper alarm triggers unexpectedly: Ensure the keypad is firmly attached to its mounting surface and the anti-tamper switch is properly engaged.
- Cannot enter programming mode: Double-check the Master Code. If forgotten, a factory reset may be required (refer to advanced programming instructions, not covered in this basic manual).
10. Garantija ir palaikymas
Dėl garantijos informacijos ar techninės pagalbos kreipkitės tiesiogiai į pardavėją arba gamintoją. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą.
