YUHANUS Door Access Control System 600lb Electric Magnetic Lock Kit

1. Įvadas

This manual provides detailed instructions for the installation, operation, and maintenance of your YUHANUS Door Access Control System. This system is designed to provide secure and convenient access management for various environments, utilizing a 600lb electric magnetic lock, a waterproof keypad, ID card functionality, and smartphone control via the Tuya app.

Prieš įdiegdami ir naudodami atidžiai perskaitykite šį vadovą, kad užtikrintumėte tinkamą veikimą ir saugą.

2. Saugos informacija

• Elektros sauga: Installation involves electrical wiring. Ensure power is disconnected before performing any wiring. If you are not comfortable with electrical work, consult a qualified electrician.
• ttage: The system operates on AC 110V-240V input and provides DC 12V output. Verify correct voltage jungtys.
• Atsparumo vandeniui įvertinimas: The keypad is waterproof (IP68 rated), but ensure all connections are properly sealed and protected from moisture, especially for outdoor installations.
• Magnetic Lock Strength: The 600lb magnetic lock provides strong security. Ensure proper alignment and mounting for optimal performance.
• Avarinė prieiga: Always have an alternative emergency exit plan in case of power failure or system malfunction.
• Vaikai ir augintiniai: Keep small components and tools out of reach of children and pets.

3. Pakuotės turinys ir gaminio aprašymasview

The YUHANUS Door Access Control System includes the following main components:

• Prieigos valdymo klaviatūra
• 600lb Electric Magnetic Lock
• Maitinimo blokas
• Išėjimo mygtukas
• ID Cards/Key Fobs (quantity may vary)
• Mounting Hardware and Cables (not all cables may be included, refer to wiring diagrams)

3.1. Access Control Keypad

The waterproof keypad allows access via PIN code or ID card. It features a numeric keypad, star (*), hash (#), and bell buttons.

3.2. 600lb Electric Magnetic Lock

This magnetic lock provides 600 pounds of holding force for secure door closure. It consists of a magnet unit and an armature plate.

3.3. Maitinimo blokas

The power supply converts AC input to DC 12V for the access control system components. It includes terminals for various connections and a delay time adjustment button.

3.4. Išėjimo mygtukas

A compact metal button for convenient exit from the secured area.

4. Sąranka ir diegimas

Proper installation is crucial for the system's security and functionality. Follow these steps carefully.

4.1. General System Layout

This diagram illustrates the typical placement of components: keypad and Tuya app for outside access, magnetic lock on the door frame, power supply, and exit button for inside access.

4.2. Power Supply Wiring Details

The power supply unit connects to AC 110V-240V (L, N, Ground) and provides DC 12V output. The delay time for the lock can be adjusted using the button indicated.

4.3. Wiring Diagram (Basic Setup)

This diagram shows the connections for the access control keypad, exit button, power supply, and magnetic lock.

Connect the Access Control Keypad (NC, NO, +12V, GND, COM, OPEN, D1, D0, BELL) to the Power Supply (CTRL+, CTRL-, PUSH, GND, +12V, NC, GND, NO) and the Magnetic Lock (+, -). The Exit Button connects to COM and OPEN on the keypad.

4.4. Wiring Diagram (with Remote Control)

If your kit includes a remote control module, use this diagram for connections.

This diagram includes connections for a remote control module, typically connecting to the power supply or directly to the magnetic lock control lines.

4.5. Magnetic Lock Installation

Install the magnetic lock on the door frame and the armature plate on the door. Ensure they are perfectly aligned when the door is closed for maximum holding force. Brackets (L-bracket, Z-bracket) may be required depending on your door type and opening direction.

Example of magnetic lock and armature plate installation on a door frame and door.

5. Naudojimo instrukcijos

Once installed, configure and operate your access control system.

5.1. Initial Setup and Master Code

1. Įeikite į programavimo režimą: Typically, press * followed by the default master code (e.g., 123456). Refer to your keypad's specific instructions for the default code.
2. Pakeisti pagrindinį kodą: It is highly recommended to change the default master code immediately for security.

5.2. Adding User Codes (PINs)

1. Įeikite į programavimo režimą.
2. Select the option to add a user code (e.g., press 1).
3. Enter a unique user ID (e.g., 001).
4. Enter the desired PIN code (4-6 digits) and confirm.
5. Exit Programming Mode (e.g., press #).

5.3. Adding User Cards (ID Cards/Fobs)

1. Įeikite į programavimo režimą.
2. Select the option to add a user card (e.g., press 2).
3. Present the ID card/fob to the keypad reader. The keypad will register it.
4. Išeikite iš programavimo režimo.

5.4. Tuya App Integration

1. Atsisiųsti programą: Atsisiųskite „Tuya Smart“ arba „Smart Life“ programėlę iš savo išmaniojo telefono programėlių parduotuvės.
2. Registruotis / Prisijungti: Susikurkite paskyrą arba prisijunkite.
3. Pridėti įrenginį: Follow the in-app instructions to add your access control system. This typically involves putting the keypad into pairing mode (refer to keypad manual for specific steps, often holding a button or entering a code).
4. Nuotolinio valdymo pultas: Once paired, you can remotely unlock the door, manage users, and set temporary passwords via the app.

5.5. Durų atrakinimas

• Via PIN Code: Enter your valid PIN code followed by #.
• Via ID Card: Present your registered ID card/fob to the keypad reader.
• Via Tuya App: Use the unlock function within the Tuya app.
• Via Exit Button: Press the exit button from inside the secured area.
• Nuotolinio valdymo pultu: If installed, press the unlock button on the remote control.

6. Priežiūra

• Reguliarus valymas: Wipe the keypad and magnetic lock surfaces with a soft, damp audinys. Venkite abrazyvinių valiklių.
• Patikrinkite jungtis: Periodically inspect all wiring connections for tightness and signs of corrosion, especially in outdoor environments.
• Magnetinio užrakto lygiavimas: Ensure the magnetic lock and armature plate remain properly aligned. Misalignment can reduce holding force.
• Programinės įrangos atnaujinimai: Keep the Tuya app updated to the latest version for optimal performance and security features.
• Atsarginė galia: Consider a UPS (Uninterruptible Power Supply) for the system to maintain functionality during power outages.

7. Problemų sprendimas

8. Specifikacijos

9. Garantija ir palaikymas

For warranty information and technical support, please refer to the documentation provided with your purchase or contact YUHANUS customer service directly. Keep your purchase receipt for warranty claims.

For further assistance, visit the official YUHANUS websvetainėje arba susisiekite su jų palaikymo komanda.