„M5Stack ATOM Lite ESP32“ daiktų interneto kūrimo rinkinio naudotojo vadovas

2. Pakuotės turinys

The M5Stack ATOM Lite package includes the following items:

• 1 x ATOM Lite ESP32 IoT Development Kit

Figure 3: The M5Stack ATOM Lite development kit as packaged for retail.

3. Aparatūra baigtaview

The ATOM Lite features several integrated components and interfaces for diverse applications.

Figure 4: Diagram illustrating the key components and interfaces of the ATOM Lite, including the IR-LED, RGB LED, internal button (G39), Reset button, external pins, USB-C port, and HY2.0-4P connector.

Pagrindiniai komponentai:

• ESP32-PICO Microcontroller: Integrates Wi-Fi and Bluetooth capabilities.
• USB-C prievadas: Maitinimo šaltiniui ir duomenų perdavimui (programavimui).
• HY2.0-4P Connector: A 4-pin connector for external modules and sensors.
• GPIO kaiščiai: Six general-purpose input/output pins for connecting peripherals.
• RGB LED (G27): A programmable full-color LED.
• Infra-Red (IR) LED: For infrared communication.
• Built-in Button (G39): A user-programmable button.
• Atkūrimo mygtukas: Norėdami paleisti įrenginį iš naujo.
• M2 Screw Hole: Montavimo tikslais.

5 paveikslas: viršuje view of the ATOM Lite, detailing the pinout for the HY2.0-4P connector and external GPIOs, including voltage (3V3, 5V) and ground (G) connections.

4. Darbo pradžia (sąranka)

To begin using your M5Stack ATOM Lite, follow these steps:

4.1. Įjungimas ir pradinis prijungimas

1. Connect the ATOM Lite to your computer using a USB-C cable. The device will power on automatically.
2. Upon connection, the RGB LED may illuminate, indicating power.

Figure 6: The ATOM Lite connected to a power source via a USB-C cable, with its RGB LED active.

4.2. Tvarkyklės diegimas

The ATOM Lite uses a standard USB-to-Serial chip (typically CP2104 or CH9102F). Most modern operating systems will automatically install the necessary drivers. If the device is not recognized, you may need to manually install drivers:

• For Windows/macOS/Linux, search for 'CP2104 driver' or 'CH9102F driver' online and download from the official Silicon Labs or WCH websvetainę.

4.3. Kūrimo aplinkos sąranka

The ATOM Lite supports various development platforms:

• Arduino IDE: Install the ESP32 board package in the Arduino IDE. Refer to the official ESP32 Arduino documentation for detailed instructions.
• MicroPython: Flash MicroPython firmware onto the device. Tools like `esptool.py` can be used for this.
• UI-FLOW: M5Stack's block-based programming platform. Download the UI-FLOW desktop IDE or use the web versija.
• ESPHome: For Home Assistant integration, visit esphome.io for pre-built projects and flashing instructions.

5. Pagrindinė operacija

5.1. Using the Built-in Button

The ATOM Lite includes a programmable button (GPIO39). This button can be used for various user inputs, such as triggering events, changing modes, or confirming actions within your programmed application.

5.2. Controlling the RGB LED

The integrated RGB LED (connected to GPIO27) is a versatile indicator. It can be programmed to display different colors and patterns to convey status, alerts, or other visual feedback.

5.3. Infra-Red (IR) Communication

The IR LED allows the ATOM Lite to send infrared signals, enabling control of IR-compatible devices such as televisions, air conditioners, or other consumer electronics. Programming libraries are available for encoding and decoding IR protocols.

6. Išorinių įrenginių prijungimas

6.1. HY2.0-4P Interface

The HY2.0-4P connector provides a convenient interface for connecting M5Stack's Grove-compatible modules and other peripherals. This connector typically includes power (5V), ground, and two data lines (e.g., I2C, UART, or digital I/O).

6.2. External GPIOs

The ATOM Lite exposes additional GPIO pins (G19, G22, G23, G26, G32, G33) for direct connection to custom circuits, sensors, and actuators. Refer to the pinout diagram (Figure 5) for specific pin assignments and capabilities.

7. Priežiūra ir priežiūra

• Laikykite prietaisą sausą ir atokiau nuo drėgmės.
• Stenkitės, kad prietaisas nepatektų į ekstremalias temperatūras.
• Handle with care to prevent physical damage to the board and connectors.
• Clean the device with a soft, dry cloth if necessary. Do not use liquid cleaners.

8. Problemų sprendimas

• Kompiuteris neatpažįsta įrenginio: Ensure USB-C cable is functional. Install appropriate USB-to-Serial drivers (CP2104/CH9102F) if not automatically detected.
• Program upload failure: Verify correct board and port selection in your IDE. Ensure drivers are installed. Try pressing the Reset button before uploading.
• „Wi-Fi“ ryšio problemos: Check Wi-Fi credentials in your code. Ensure the device is within range of the Wi-Fi network.
• Netikėtas elgesys: Review your code for logical errors. Ensure all external connections are correct and secure.

9. Specifikacijos

7 pav. Apačia view of the ATOM Lite, showing regulatory markings including the FCC ID.

10. Informacija apie garantiją

For detailed warranty information, please refer to the official M5Stack website or contact their customer support directly. Warranty terms and conditions may vary based on region and point of purchase.

11. Pagalba ir ištekliai

For further assistance, technical documentation, and community support, please visit the official M5Stack website. You can find tutorials, examples, and forums to help with your development projects.

• Official M5Stack Websvetainė: https://m5stack.com/
• M5Stack Documentation: Refer to the product-specific documentation available on the M5Stack websvetainę.