Produktas baigtasview
The WALI GSMU001XL is a heavy-duty single monitor gas spring desk mount designed to support ultrawide or curved LCD/LED screens ranging from 17 inches to 49 inches. It can hold monitors weighing up to 44 lbs and is compatible with VESA mounting patterns of 75x75mm and 100x100mm. This mount offers full adjustability for optimal viewing angles and includes integrated USB Type-C and USB Type-A 3.0 ports for convenient connectivity.
The mount features a two-stage locking system, supporting both C-clamp and Grommet Base installations on desks with a thickness between 0.47 inches and 1.97 inches.
Pakuotės turinys
Before beginning installation, please ensure all components are present and undamaged. If any parts are missing or damaged, contact WALI customer support.
- 1 x WALI Ultrawide Monitor Desk Mount (GSMU001XL)
- Mounting Hardware Kit (screws, washers, spacers, Allen wrenches)
- Vartotojo vadovas
Sąranka ir diegimas
Follow these steps carefully to install your WALI GSMU001XL monitor mount. Two installation methods are available: C-clamp and Grommet Base.
1 veiksmas: pasirinkite tvirtinimo būdą
Nustatykite, ar naudoti C-clamp or Grommet Base. Both methods are compatible with desk thicknesses from 0.47 inches to 1.97 inches.
Step 2: Assemble the Base and Arm
Assemble the base according to your chosen mounting method (C-clamp or Grommet Base). Attach the lower arm section to the base.
3 veiksmas: pritvirtinkite VESA plokštę prie monitoriaus
Attach the VESA plate to the back of your monitor using the appropriate screws from the hardware kit. Ensure the screws are tightened securely but do not overtighten.
4 veiksmas: pritvirtinkite monitorių prie rankos
Carefully slide the monitor (with the attached VESA plate) onto the upper arm section. Ensure it locks into place. It is recommended to have assistance when mounting heavier monitors.
Step 5: Connect USB Cables
Connect the integrated USB Type-C and USB Type-A 3.0 ports on the mount to your computer using the provided cables. Route cables through the arm's cable management channels for a tidy setup.
Monitoriaus svirties valdymas
The WALI GSMU001XL monitor arm offers extensive adjustability to achieve an ergonomic viewpadėtis.
Monitoriaus padėties reguliavimas
The arm allows for the following movements:
- Pakreipti: Adjust the monitor angle from +50° to -20°.
- Sukamasis: Rotate the monitor horizontally up to +90°/-90°.
- Pasukimas: Rotate the monitor 360° to switch between landscape and portrait modes.
- Aukščio reguliavimas: The gas spring arm allows for a height range of 9.09 inches to 19.69 inches.
- Pratęsimas: The arm can extend up to 21.93 inches.
Dujų spyruoklės įtempimo reguliavimas
The gas spring tension must be adjusted to match your monitor's weight for proper balance and movement. Use the provided Allen wrench to adjust the tension screw located on the arm.
- To adjust for lighter monitors or if the monitor floats up: Turn the tension screw pagal laikrodžio rodyklę.
- To adjust for heavier monitors or if the monitor sags down: Turn the tension screw prieš laikrodžio rodyklę.
Adjust gradually until the monitor stays in position when released.
Priežiūra
To ensure the longevity and proper function of your WALI monitor arm, follow these simple maintenance guidelines:
- Valymas: Nuvalykite rankeną ir pagrindą minkšta, d šluosteamp šluoste. Venkite abrazyvinių valiklių ar tirpiklių, kurie gali pažeisti apdailą.
- Periodiniai patikrinimai: Periodiškai patikrinkite visus varžtus ir jungtis, kad jie būtų tvirtai priveržti. Jei reikia, priveržkite.
- Dujinė spyruoklė: The gas spring is designed for long-term use and typically requires no maintenance. If you notice changes in its performance, refer to the troubleshooting section.
Trikčių šalinimas
Jei kyla problemų dėl monitoriaus laikiklio, žr. šias dažniausiai pasitaikančias problemas ir sprendimus:
Problem: Monitor Sags or Drops
Sprendimas: The gas spring tension is likely too low for your monitor's weight. Turn the tension screw prieš laikrodžio rodyklę to increase tension until the monitor holds its position.
Problem: Monitor Floats Up or is Difficult to Push Down
Sprendimas: The gas spring tension is likely too high for your monitor's weight. Turn the tension screw pagal laikrodžio rodyklę to decrease tension until the monitor holds its position.
Problem: Monitor is Unstable or Wobbles
Sprendimas:
- Ensure all mounting screws (desk clamp/grommet, VESA plate, arm connections) are securely tightened.
- Verify that your desk is stable and can support the weight of the mount and monitor.
Problem: USB Ports Not Functioning
Sprendimas:
- Ensure the USB cables from the monitor arm are properly connected to your computer's USB ports.
- Test with different USB devices or computer ports to rule out device or port issues.
If problems persist after attempting these solutions, please contact WALI customer support.
Specifikacijos
| Funkcija | Specifikacija |
|---|---|
| Modelio numeris | GSMU001XL |
| Prekės ženklas | WALI |
| Monitoriaus dydžio suderinamumas | 17" to 49" Ultrawide/Curved |
| Svorio talpa | Iki 44 svarų (20 kg) |
| VESA suderinamumas | 75x75mm, 100x100mm |
| Stalo storio suderinamumas | 0.47–1.97 colio (1.2–5 cm) |
| Montavimo tipas | C-clamp, Žiedinio pagrindas |
| Pakreipimo kampas | +50° / -20° |
| Pasukimo kampas | +90° / -90° |
| Rotacija | 360° (peizažas į portretą) |
| Aukščio diapazonas | 9.09–19.69 colio (23.1–50 cm) |
| Maksimalus rankos prailginimas | 21.93 colio (55.7 cm) |
| Integrated Ports | 1 x USB Type-C, 1 x USB Type-A 3.0 |
| Medžiaga | Aliuminis |
| Spalva | Juoda |
Produkto vaizdo įrašas
Garantija ir palaikymas
For warranty information or technical assistance, please contact WALI customer support. WALI provides experienced and friendly US-based customer support available to assist 7 days a week.
Refer to the product packaging or the official WALI websvetainėje rasite naujausią kontaktinę informaciją ir garantijos sąlygas.
